204.00EUR 124.90EUR

AXI5320/xx



Frontal del AXI5320/xx

Trasera del AXI5320/xx

Cota de la configuraci�n frontal del AXI5320/xx

Cota de la configuraci�n trasera del AXI5320/xx
This very efficient brushles motor with neodymium magnets and a rotating case is manufactured using the latest technology from the finest quality materials. The hardened steel 8mm shaft is supported by three ball bearings, and the overall robust construction ensures a long service life. Due to it’s high torque characteristics this motor is capable of turning large propellers with a high level of efficiency, and without the need for a gearbox. This motor has been designed especially for wide spread high current 6s lipols packs of capacity from 4000mAh to 5500mAh. AXI 5320/18 GOLD LINE together with 6s lipols is capable to reach currents up to 80A shortly and is suitable for 3D models weighing up to 4300g and sports aerobatic models up to 5500g. The lack of gearbox noise makes these motors particularly suitable for scale models. AXI53xx motors offer front and reverse (radial) mounting options, and two prop adapters for both mounting options are included as standard.

Available Options:

Serie:



few units
few units

Reviews

Customers who bought this product also purchased
Propeller APC 20x8 Electric
Propeller APC 20x8 Electric

few units
few units

Motor mount M
Motor mount M

few units
few units

Propeller APC 14x8.5 Electric
Propeller APC 14x8.5 Electric

few units
few units

Propeller POWER-PROP 14x10
Propeller POWER-PROP 14x10

few units
few units

Propeller APC 11x7 Electric
Propeller APC 11x7 Electric

few units
few units

Propeller APC 18x12 Electric
Propeller APC 18x12 Electric

few units
few units

We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x AXI 2820/12 V2 Long
1 x Motor Mega AC 22/45/03 E
1 x Motor Mega AC 16/15/07
1 x 10 mm gas motor standoff
1 x AXI 2217/12 V2
1 x A50 Motor Mount Alu complete set
1 x Motor Mega AC 16/15/05 CE F5J
1 x AXI 2212/20 V2
1 x AXI 2808/16 V2 Long
1 x Cables suitable for the motor AC 28/7
1 x AXI 2826/10 V2 Long
1 x 
1 x Motor mount for 1200 mm models
1 x AXI 2826/6 V2 Long
1 x AXI 2820/14 V2
1 x AXI 2820/8 V2
1 x AXI 2826/12 V2
1 x AXI 2820/8 V2 Long
1 x Motor Mega AC 16/25/04
1 x Electric coversion set
1 x Size "M" motor holder for class 400
2 x AXI 2826/10 V2
1 x Motor Mega AC 16/25/01E 3.17mm
1 x Central support Speed 600
1 x AXI 2814/16 V2
1 x AXI 2814/10 V2
1 x Motor Mega AC 16/25/03
1 x Motor A20-20 L EVO
1 x Motor A30-10 XL V4
1 x Motor A30-12 XL Glider
1 x Axle for motor A30-XL V2
1 x Motor MVVS 2.0/1120
1 x Carbon fiber rod 14 mmx1000 mm
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Extension silicon 100 cm (Graupner)
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x EasyFLY Addon
1 x 1/6 Pilot "Garry"
1 x Futaba Female 40 cm extension
1 x Sanyo Eneloop AA 1,2 V battery 2000 mAh
1 x Civilian pilot "Gramps" size 9cm (Slimline)
1 x Xplorer1 anemometro
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x Straightened rod Ø 0.8 mm x 1000 mm
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x Extension 15 cm (Futaba)
1 x Conector BEC female (10 pcs)
1 x BALSA leading edge 8x10x1000 mm
1 x Extension silicon 30 cm female (Futaba)
1 x Extension lead 15 cm Multiplex
1 x ABS angle 5,0x5,0x1000 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x ABS angle 1.5x1.5x1000 mm
1 x Panasonic Eneloop AA 1,2 V battery 19>00 mAh
1 x Connectors banna oro 2 mm (M/F) (ultralight)
1 x Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x BALSA trip 10x10x1000 mm
1 x Unmounted aluminium pin 6x98 mm (2 pcs)
1 x ARAMID honeycomb 1300x2600x2 mm
1 x Bateria LRP 2200-7.2v 6 cell NiMH
1 x U Profile ABS 8,0x4,0x1000 mm
1 x Profile ABS Square 2 x 1000 mm
1 x Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x XH male balance (2S) connector (2 pcs)
1 x Straightened rod Ø 3.0 mm x 1000 mm
1 x XH male balance (3S) connector (2 pcs)
1 x Pilot "Goose" (Slimline)
1 x Carbon fiber rod 3.0 mm x 1000 mm
1 x Baseplate servo
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x BALSA triangular 15x15x1000 mm
1 x Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x 1/12 Pilot "Langley"
1 x Aceite DELUXE turbine Jet Oil 1 litro
1 x Straightened rod Ø 0.5 mm x 1000 mm
1 x BALSA trip 3.0x5.0x1000 mm
1 x Glases Nimbus
1 x Carbon fiber rod 10 mm x 1000 mm
1 x 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x 1/12 Pilot "Cougar"
1 x Pine wood slat 10x10x1000 mm
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x ABS angle 10,0x10,0x1000 mm
1 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x Hot Glue Stick GREEN
1 x ABS angle 3,0x3,0x1000 mm
1 x Connectors banna oro 3 mm (M/F)
1 x Cable silicona female batt. receptor 30 cm (Futaba)
1 x Pilot "Duke" Legends Series (Slimline)
1 x Civilian pilot "Pamela" size 9cm (Slimline)
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x Beech dowels 10 mm x 1000 mm
1 x BALSA trip 3.0x3.0x1000 mm
1 x BALSA trip 2.0x10.0x1000 mm
1 x 1/6 Pilot "Cindy"
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Profile ABS Square 1 x 1000 mm
1 x Connectors banna oro 2 mm (M/F)
1 x Cabel "Y" 30 cm (graupner)
1 x Carbon fiber rod 6.0 mmx1000 mm
1 x Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x Interface Jack Adapter IKARUS
1 x Flap hinge 33x9 mm (6 pcs)
1 x Straightened rod Ø 1.5 mm x 1000 mm
1 x ABS angle 4,0x4,0x1000 mm
1 x Flat Connector 4.0 mm x 1000 mm
1 x Liston HAYA 3 x 10 x 1000 mm
1 x Aluminium rod Ø 4.0 mm x 3000 mm
1 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x 1/6 Pilot "Tony"
1 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x Civilian pilot "G-Man" size 9cm (Slimline)
1 x 1/12 Pilot "Fighter"
1 x Glases Ace
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Straightened threaded rod M3 - 1m
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
2 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x OBECHI sheet 2.0x3.0x1000 mm
1 x Gold antispark 4 mm plug
1 x Xplorer4 anemometro
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Aluminium servo arm (2 uds)
1 x 200 mm extensión servo HITEC/JR
1 x Conector Servo female 4 pines
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x ABS "T" angle 2.0x2.0x1000 mm
1 x Ball Link Plier
1 x Connectors banna oro 4 mm (M/F) (ultralight)
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x Piloto JET 1:3,5
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x XH female balance (2S) connector (2 pcs)
1 x Ventus 1:4 set of instruments
1 x 2 mm male connector (2 pcs) with safety connector
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x Carbon roving DowAksa / 24k / 1600 tex
1 x Fox MDM 1 4000 mm DeLuxe,wing joiner
1 x DG-303 ACRO 3750 mm, canopy
1 x IMPULSE 2 F3F
1 x Gobe R-26S (Airwold)
1 x ASH 31 Mi Scale:1/3 - 7m, elevator
1 x Servo MKS HV1220
1 x Servo MKS 6100 DS
1 x Servo MKS HBL599 SL
1 x Brazo servo MKS X8 Metal L:1.25/1.5 inc
1 x Servo Metal Horn 15.5 mm MKS
1 x AXI 5320/18 V2
1 x AXI 5325/20 V2
1 x Frontal support Speed 280
1 x Motor Mega AC 16/07/06
1 x AXI2203/40 VPP
1 x Motor A50-10L Turnado V3 Glider
1 x A50 Backmountset complete
1 x Motor A40-10S V4 14-Pole
1 x AXI2217/9D
9,366.90EUR
Manufacturers
Manufacturer Info
Model Motors
Model Motors Homepage
Other products
Languages
Español English
Currencies