1 x | Gates hinge |
1 x | 18 mm reinforced hinge |
1 x | Flap hinge (6 pcs) |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Long pinned hinge (6 uds) |
2 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | 25 mm reinforced hinge |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Miniature brass strap hinge, 1 m |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
2 x | Small pinned hinge (12 uds) |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | OSD Telemetry sensor |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
2 x | Battery voltage telemetry |
2 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | 15 mm reinforced hinge |
2 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Horn for flap control (1 pcs) |
1 x | Small aluminium horn blue (2pcs) |
1 x | Horn 6/35 with M3 Bearing |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Cable with accesories |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Horn 6/27 with M3 Bearing |
1 x | Horn 13,5x16 mm (2 pcs) |
2 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Horn 5/20 with M2 Bearing |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | 20 mm carbon horn |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | DUPLEX 2.4EX Expander E4 |
1 x | Suport PITOT |
1 x | Pitot tube JETI MSpeed DUPLEX |
1 x | MT 125 temperature sensor |
1 x | FALCON 20X9 CARBON PROPELLER (GAS) |
1 x | Propeller POWER-PROP 14x9 Izda |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | Propeller POWER-PROP 13x9 |
1 x | Propeller POWER-PROP 14x9 |
1 x | Receiver Hitec OPTIMA 9 2.4 GHz AFHSS 9ch |
1 x | Receptor MINIMA 6S HITEC |
1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Field folding model stand SebArt |
1 x | Dust collector for mould cleaning |
1 x | Oils Pumps Empty (1 liter) |
1 x | Panasonic Eneloop AA 1,2 V battery 19>00 mAh |
1 x | Medidor ángulos y/o incidencias |
1 x | Propeller balancer |
1 x | Xplorer1 anemometro |
1 x | Surface Indicator Gauge Small |
1 x | Ball Link Plier |
1 x | Hot Glue Stick RED |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Bateria LRP 2200-7.2v 6 cell NiMH |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
1 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Bungee HLG Premium |
1 x | R6106 HF 2,4 GHz receiver |
1 x | Big Crow DLE-170M |
1 x | Long pinned hinge (12 uds) |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Power supply NT 40 Amp. |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | Short extra-strong control horn with bearing 2,8x15 |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Long adjustable aluminium control horn with bearing 2,8x15 |
1 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
1 x | Small adjustable aluminium control horn with bearing 2,8x15 |
1 x | Spinner 90 mm GFK |
1 x | Straightened threaded rod M2-1m |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | HOPPER tank Digitech 250 ml (Festo nipples 6 mm) |
1 x | Servo GO-1023MG 7.0 kg.cm 0.09s/60º |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
1 x | FOX 3000 mm ARF (FMS) |
1 x | Glider Ka 7 Red (2540mm) |
1 x | Fournier RF-4D |
1 x | Aero-Master (Aero-naut) |
1 x | ENIGMA ARF |
1 x | Chili Race F3K 2 wing servo mounted(carbon biax) |
1 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | 38 mm aluminium spinner. |
2 x | Carbon fiber rod 20 mmx1000 mm |
1 x | BABY glider (Aero-naut) |
1 x | Glider PIROL |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Smokelance |
1 x | Servos security connector (2 pcs) |
1 x | LiPo Storage Box Type "BIG" |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Black "FUEL VENT" round aluminum overflow socket |
1 x | TYGON tubo 1 m Diam. 3.4 x 2.0 mm |
1 x | Extension Arm for Carburetor |
1 x | ARS 300 91" ARF 2311mm ORANGE |
1 x | EDGE 540-A 105" (2660 mm) |
1 x | SLICK 360-A 104" (2640 mm) |
1 x | 25 mm Sandpaper file |
1 x | Brazo servo KAVAN doble aluminio 25T - 2.5" M3 |
1 x | BULLIT Wing 1095 mm |
1 x | |
1 x | Conector MT-60 (pair) |
1 x | Dummy motor GPW Wasp Scale 1/4 |
1 x | SkyMaxx 1.550 mm (kit) |
1 x | Combo KAVAN PRO 3536-1000 + RAY 40 SB |
1 x | Cessna SKYLANE T182 1.75m - Seagull Model |
1 x | Concave-Convex sandpaper file 13 mm |
|
9,410.97EUR |