| 2 x | Truck-trailer for gliders 720 x 239 mm |
| 1 x | Field folding model stand SebArt |
| 2 x | Propeller balancer |
| 1 x | Angle measurer |
| 1 x | Surface Indicator Gauge Small |
| 2 x | Stickers-digit for marking |
| 2 x | Bec MR UBEC 5A (5v/6v/7v) |
| 1 x | JETImodel SINGLE BEC |
| 1 x | CC 02 |
| 2 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 2 x | TrainerCord (master-learner) |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 2 x | Cap closure 33/23.5mm (2 uds) |
| 2 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 2 x | Electric spoiler 250 mm (2 pcs) |
| 2 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 2 x | TP/TopFuel - XH 2/3S Adapter |
| 2 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 2 x | 2 LiPo XH>EH adapter |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 2 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 2 x | Canopy Latch |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 2 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 3 x | CC 03 |
| 2 x | CC 05 |
| 2 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | 4 LiPo XH>EH adapter |
| 4 x | One touch canopy lock |
| 2 x | Steering arm 16 mm Ø 4 mm |
| 3 x | Steering arm 12 mm Ø 4 mm |
| 2 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | MPX-Dean "T" Adapter |
| 2 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 2 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 3 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 2 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | BEC 3A FOXY |
| 2 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 2 x | APM2.6 Power module with 5.3V DC BEC |
| 2 x | Cierre cabina aluminio Ø4, I=10 mm |
| 2 x | Locking cable tie 2.5x100 (uds) |
| 4 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 3 x | Cockpit plastic closing |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 2 x | Adapter lead MPX/XT60 |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | ABS angle 2,0x2,0x1000 mm |
| 1 x | U Profile ABS 8,0x4,0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
| 2 x | ABS angle 4,0x4,0x1000 mm |
| 1 x | ABS angle 10,0x10,0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
| 1 x | L-Connector 1.5 mm x 1000 mm |
| 1 x | ABS "T" angle 4.0x4.0x1000 mm |
| 1 x | Cross Connector 4.0 mm x 1000 mm |
| 1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
| 1 x | ABS "T" angle 10.0x10.0x1000 mm |
| 2 x | Profile ABS half cane 2.0x1000 mm |
| 2 x | Profile ABS half cane 2.5x1000 mm |
| 1 x | ABS angle 5,0x5,0x1000 mm |
| 1 x | ABS "T" angle 2.0x2.0x1000 mm |
| 1 x | Profile ABS Square 4 x 1000 mm |
| 2 x | Vasa model Catapult |
| 1 x | 800TVL CMOS camera for FPV |
| 1 x | Small aluminium horn red (2pcs) |
| 1 x | LH long black aluminium horn L31xH30 (2pcs) |
| 1 x | Horn 5/15 with M2 Bearing |
| 1 x | 6 mm aluminium horn with patella |
| 1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
| 2 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
| 1 x | Horn 16,5x20 mm (2 pcs) |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | Silicone 0,50 qmm servos wire Graupner(100 m) |
| 1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 1 x | Aluminium cap bolt washer M4 red (8 pcs) |
| 1 x | Cap Hispano Aviación |
| 1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
| 1 x | DPS Switch JR/JR |
| 1 x | 250 mm / 16 mm Airbrakes |
| 1 x | Allen wheel collar M4x4 |
| 1 x | 41x5,5 mm wires output (2 pcs) |
| 3 x | Double conector with JR adapter and 200 mm extension |
| 2 x | Connector Sub-D 2+5 Male |
| 2 x | 3 LiPo XH>EH adapter |
| 2 x | Cable grommet Ø 5 mm (4 uds) |
| 2 x | Adapter lead MPX/EC3 |
| 1 x | UBEC 6A KAVAN |
| 3 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
| 3 x | Fully Threaded Steel Rod M3 |
| 3 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
| 3 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
| 2 x | Wing bolts M3 Steel screw Red (2 pcs) |
| 1 x | Control for forward wheel (MINI) |
| 2 x | Cockpit metalic closing |
| 2 x | 140 mm rods + T patellas set for direction control |
| 2 x | Window mounting channel 5m |
| 1 x | 90 mm rods + T patellas set for direction control |
| 1 x | ABS angle 3,0x3,0x1000 mm |
| 1 x | Profile ABS half cane 7.0x1000 mm |
| 1 x | Rubber profile 10-2 mm 2M |
| 1 x | TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible |
| 2 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
| 1 x | TS832 to Gopro AV/Power Cable |
| 1 x | DJI Mavic Air Fly More Combo |
| 2 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 3 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | Covered closure or fairings |
| 2 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 3 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 3 x | Steering arm 16 mm Ø 3 mm |
| 1 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 2 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | Cable control set |
| 3 x | Fully Threaded Steel Rod M2,5 (2 uds) |
| 1 x | Servo MKS HV6120H |
| 1 x | HV6150 Digital Servo |
| 1 x | Servo MKS HBL380 |
| 1 x | Servo MKS HV1220 |
| 2 x | La Capitania di Venetia 1:50 |
| 2 x | SCHARNHORST accessories |
| 2 x | Support Pitot JETI |
| 2 x | Support Filtro FESTO |
| 2 x | Support ECU Xicoy X-45 |
| 1 x | Servo MKS HV747 |
| 1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
| 1 x | Brass control horn M2 large for wire (2pcs) |
| 1 x | 6 mm M3 variable inclined horn |
| 1 x | 5 mm M2 variable horn |
| 1 x | 6 mm blue aluminium threaded horn with patella |
| 1 x | Horn 6/35 with M3 Bearing |
| 1 x | Control horn long w/ball |
| 1 x | 20 mm carbon horn |
| 1 x | 25 mm Sandpaper file |
| 1 x | Crawler GRE-24 RTR 1:24 Arena |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 2 x | Snap short M2 (10 uds) |
| 2 x | Split M1,2x10 (10 pcs) |
| 1 x | Connector CAN 15 |
| 2 x | Extension 5 lipos JST - JST/C |
| 1 x | 30 cm BEC cable (male) |
| 1 x | EWC3 100 cm wing connector |
| 1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 1 x | Triple rod con. 2mm Pushrod (2 pcs) |
| 1 x | FX three-position switched channel, long |
| 1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
| 2 x | PWC4 wing/fuselage connector for 4 servos |
| 1 x | SLICK 360-A 104" (2640 mm) |
| 2 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
| 2 x | Pushrod greyline 3/2 with coupler M2 |
| 2 x | Snap long M2 (10 uds) |
| 2 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
| 2 x | Lead with adhesive (2 pcs) |
| 1 x | Wheel collar 5 mm Ø (4 uds) |
| 1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 2 x | Snap pin for micro clevis (10 uds) |
| 2 x | Split pin 1x8 mm (10 uds) |
| 1 x | Cable grommet Ø 4 mm (4 uds) |
| 2 x | Split pin 1.6x16 mm (10 uds) |
| 1 x | EWC3 40 cm wing connector |
| 1 x | SUS wire 3m (nylon coated) |
| 1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 1 x | EXTRA NG 74" white/red/blue (Skywing RC) |
| 2 x | Female connector JST SH 1.0mm with 10 cm wire |
| 1 x | EWC6 40 cm wing connector |
| 1 x | SLICK 360-B 104" (2640 mm) |
| 1 x | Wheel collar 3.5 mm Ø (4 uds) |
| 1 x | 30 cm BEC cable (female) |
| 1 x | Micro Switch button |
| 1 x | CM-3 |
| 1 x | DPSI Ampere battery backer |
| 2 x | Female connector for 6 pines AWG |
| 1 x | Tip wing protector 40x14 (2 pcs) |
| 1 x | EDGE 540-A 105" (2660 mm) |
| 1 x | wing/fuselage connector for 12 pines AWG 20-24 |
| 1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
| 2 x | Bidule 111 3000 mm |
| 3 x | Male connector for 6 pines AWG |
| 1 x | USB Interface REVOLECTRIX for CellPRO 10s |
| 1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
| 2 x | Female connector for 10 pines AWG |
| 1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
| 2 x | Male Prolonger TP 4/5S |
| 1 x | Wheel collar 4 mm Ø (4 uds) |
| 2 x | Male connector for 10 pines AWG |
| 2 x | Bidule 55 2460 mm Cabina |
| 2 x | Short Switch On/Off micro |
| 1 x | ARS 300 91" ARF 2311mm ORANGE |
| 2 x | Interruptor RX/Batterie |
| 2 x | Male connector for 20 pines AWG |
| 2 x | ANGEL 48" pp red/blue/white |
| 1 x | PSC 6 |
| 3 x | Wheel collar 2 mm Ø (4 uds) |
| 2 x | EDGE 540-A 91" (2310 mm) |
| 1 x | USB interface ALTIS |
| 2 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 1 x | Bidule 111 3000 mm Canopy |
| 2 x | SPARK Switch 7.4v |
| 1 x | SPARK Switch 5.9v |
| 1 x | Bidule 170 ARF 3.48 m |
| 1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | Female connector for 20 pines AWG |
| 1 x | Cabling for Fox MDM1 wings |
| 1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
| 2 x | Wheel collar 6 mm Ø (4 uds) |
| 2 x | Triple rod con. 3mm Pushrod (2 pcs) |
| 1 x | PSC 5 |
| 1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
| 3 x | LASER 260 60" V2 ARF Yellow (SkyWing) |
| 1 x | Three-position switched channel, short |
| 1 x | Connector Sub-D 2+5 Female |
| 1 x | Circlick securite |
| 1 x | Wing bolts M6 Steel screw Red (2 pcs) |
| 1 x | wing/fuselage connector for 3 pines AWG 20-24 |
| 1 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
| 1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
| 1 x | ANGEL 48" pp orange/black/white |
| 3 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
| 1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
| 2 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
| 1 x | Locking cable tie 4.6x203 (uds) |
| 3 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
| 2 x | Screw-lock connector M2 (2 uds) |
| 2 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
| 2 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
| 2 x | Pushrod octagone 3/2 with coupler M2 |
| 2 x | Landing gear frontal support 29x26x13,5 |
| 2 x | Landing gear frontal support 25x32x16 |
| 2 x | Pushrod greyline 4/3 with coupler M3 |
| 2 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | Falcon Carbon Spinner 82mm for electric motor |
| 1 x | Spinner INO 51 mm Chrome (Imitacion metal) |
| 1 x | VIPER JET G2 Esq. 2 White/Red |
| 1 x | Tren retractil ULTIMATUM 1.5 combo ER30 SEt B (ControlBox) |
| 1 x | 102 mm INO spinner (carbon imitation) |
| 1 x | F3A carbon 80 mm spinner for Spark EVO |
| 1 x | Crystal Universal RX 35.130 Ch 73 |
| 1 x | F3A carbon 82 mm spinner for 12 mm axis |
| 1 x | Spinner Alumin. fixed propeller 45 mm / 5,0 mm |
| 1 x | Hovercraft sailcloth |
| 1 x | Spinner Alumin. fixed propeller 50 mm / 3,2 mm |
| 1 x | 82 mm INO spinner (carbon imitation) |
| 1 x | Spinner Alumin. fixed propeller 50 mm / 4,0 mm |
| 1 x | IPACS Aerofly Professional Expansion Pack Vol. 1 PC-DVD |
| 1 x | Spinner Alumin. fixed propeller 50 mm / 6,0 mm |
| 1 x | Spinner INO 63 mm Chrome (Imitacion metal) |
| 1 x | Micro Crystal RX 35.010 Ch 61 |
| 1 x | Nut for 515/518/519 spinner special for Hacker |
| 1 x | Spinner Alumin. fixed propeller 50 mm / 5,0 mm |
| 1 x | Spinner NUT M5 |
| 1 x | Profile ABS Square 1 x 1000 mm |
| 2 x | SPS 70V 140/280 A |
| 1 x | Servo MKS HV69 |
| 1 x | Aro pasacable Ø20 mm (4 pcs) |
| 1 x | Small control horn with bearing (2 pcs) |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
| 1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
| 1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
| 2 x | Multi-adapter balancer JST/C - TP |
| 2 x | Extension 5 lipos JST/C - JST |
| 2 x | Magnetic Interruptor MULTIPLEX |
| 1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
| 1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
| 1 x | Brazo servo MKS X8 Metal L:1.25/1.5 inc |
| 1 x | Servo MKS 6100 DS |
| 1 x | Servo MKS HV6130 |
| 1 x | Support pumb/filter Xicoy X45 |
| 1 x | Soporte filtro FESTO (4 pcs) |
| 1 x | Tirpiz Battleship 1:200 |
| 1 x | Support FUEL DOT V3 |
| 1 x | Recessed MPX connector support (6 pcs) |
| 1 x | Support conector MPX (6 pcs) |
| 1 x | Soporte grifo FESTO (2 pcs) |
| 1 x | Support XT60 conector (2 pcs) |
| 1 x | Support Antena 2.4 Ghz (2 pcs) |
| 1 x | Tapa estado carga XT-60 (6 pcs) |
| 1 x | Soporte grifo FESTO vertical (1 pcs) |
| 1 x | Aro pasacable Ø25 mm (4 pcs) |
| 1 x | RX cabel |
| 1 x | Small aluminium horn gold (2pcs) |
| 1 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
| 1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
| 1 x | Adapter rotula M3 |
| 1 x | Futaba 38 mm servo arm |
| 1 x | SBEC Jeti |
| 1 x | SBEC 40 |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 2 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
| 1 x | Pushrod octagone 4/3 with coupler M3 |
| 1 x | Pushrod octagone 4/3 |
| 1 x | Pushrod octagone 3/2 |
| 1 x | FunCup XL RR |
| 1 x | DRACO 2.0m landing gear |
| 1 x | Cessna 310 PH-LAW 3200 mm (CY MODEL) |
| 1 x | SU-31 M (Aero-naut) |
| 1 x | F9F Panther (Aero-naut) |
| 1 x | DRACO 2.0m Wheel set |
| 1 x | BETA 1400 ARF Red |
| 1 x | MAULE M-7-420 2.8m Red |
| 1 x | ROBIN S50E BLUE/WHITE |
| 1 x | LA-7 (CY model)2450 mm |
| 1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
| 1 x | Clippe Wing Cub 3050 mm Blue 85cc |
| 1 x | |
| 1 x | PARTENAVIA 2020 mm ARC with Flaps |
| 1 x | KATANA DV 20 1470 mm |
| 1 x | SF260 SIAI MARCHETTI 50E yellow/black (SebArt) |
| 1 x | Katana 30, Decal set (Sebart) |
| 1 x | ASG 32 560 mm |
| 1 x | Dummy motor GPW Wasp Scale 1/4 |
| 1 x | Avanti S, Cockpit sunCover (SebART) |
| 1 x | Class 30, Red wheel pants (SebART) |
| 1 x | MAX BEC 2 |
| 2 x | MAX BEC |
| 1 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
| 1 x | Snap for floding prop for 2 mm axi |
| 2 x | Extension 2/3 lipos JST - JST/C |
| 1 x | FW-190 2400mm
Electric Landing gear complet (CY model), |
| 1 x | de Havilland Vampire (Rc Factory) |
| 1 x | Rafale C (Aero-naut) |
| 1 x | Fokker D-VIII 2090 mm G/Y (CY model) |
| 1 x | P-51D "Gunfighter" 89" (2260 mm) |
| 1 x | MB-339 Aerofoam G2 "Italian Air Force Camu" |
| 1 x | Sukhoi 29S 50E V3 YELLOW/BLACK (SebART) |
| 1 x | WINGO 2 ARF |
| 1 x | MythoS 125E WHITE/BLUE (SebART) |
| 1 x | Motor Set CHALLENGER Indoor |
| 1 x | BU 131 Jugmann Panel Instrum. frontal |
| 1 x | Wings carryng bags 50 class (SebART) |
| 2 x | CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9) |
| 1 x | DC-3 Douglas (DAKOTA) 1800 mm |
| 1 x | Pilatus PC-21 + LG.2100 mm RED/WHITE (SebArt) |
| 1 x | RV4 VAN's 42% (German Style) |
| 1 x | PHOENIX ZERO A6M - 1720 MM ARF KIT |
| 1 x | KatanaS 50E, Decal set (SebART) |
| 1 x | Pilatus PC-21 50E, Electric L.G (SebArt) |
| 1 x | Clip mini fixing for wing (2 pcs) |
| 1 x | Cable grommet Ø 3.2 mm (4 uds) |
| 2 x | Cockpit aluminium closing 5.4g |
| 1 x | 11 mm Rubber pads (14 pcs) |
| 1 x | 45 mm rods set for direction control |
| 2 x | Cockpit latch closing I=10 mm |
| 2 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
| 1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
| 1 x | Opto Gas Engine Kill Switch |
| 1 x | SPARK Switch 12v |
| 1 x | SPS 70V 100/200 A |
| 2 x | Opto Gas Engine Kill Switch |
| 1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
| 1 x | Cockpit aluminium closing 4.7g |
| 1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
| 1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
| 1 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
| 1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
| 1 x | Cockpit aluminium closing |
| 1 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 1 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 1 x | SPS Remote switch actuator |
| 1 x | Pins M connect Multipin connectors AWG 20-24 |
| 1 x | SWTU2 switch |
| 2 x | PILATUS PC-6 Turbo Porter 33% 5.290 mm |
| 1 x | Hacker X-Pro USB interface V2 |
| 1 x | JETImodel DPS 40 |
| 1 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
| 1 x | SKY MASTER 3.000 mm ARF |
| 1 x | Female connector for 12 pines AWG |
| 1 x | Interruptor SPS 70v 60/120A |
| 1 x | CARBON CUB 15cc ARF 2280 mm |
| 1 x | Sukhoi 29S 140" 3D Monster YELLOW/BLACK (SebART) |
| 1 x | FW-190 2400mm
Electric Landing gear complet (CY model), |
| 1 x | Sukhoi 29S 140" 3D Monster WHITE/BLUE/RED (SebART) |
| 1 x | Miss ULTIMATE 50E Red/Black |
| 1 x | SPITFIRE Mk-IX 81", Electric retract Landing gear |
| 1 x | MythoS 50E White/Blue |
| 1 x | RV-8 60E Super PNP Night Green |
| 1 x | EXTRA 300 78" V3 Orange/Blue |
| 1 x | SUKHOI 29S 50E V3 w/b/red |
| 1 x | EXTRA 330SC-E 95" Orange/Blue/White |
| 1 x | P-47 96", Electric retract Landing gear |
| 1 x | PARKMASTER PRO Kit + (RR) |
| 1 x | Nut for mounting M2 (4 pcs) |
 |
| 63,184.94EUR |
