1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | ABS I Strip 20x10x1000 mm |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | Strip 2,0x2,0x330 mm |
1 x | Strip 1,5x1,5x330 mm |
1 x | Round Rod 2,5x1000 mm |
2 x | Round Rod 1,25x1000 mm |
1 x | Strip ABS 2.0x5.0x1000 mm |
1 x | Strip 2,5x1,25x330 mm |
2 x | Round Rod 1,0x1000 mm |
1 x | Round Rod 6,0x1000 mm |
1 x | ABS Strip 1.5x8.0x1000 mm |
1 x | ABS Strip 1.5x6.0x1000 mm |
2 x | ABS Strip 1.5x3.0x1000 mm |
2 x | ABS Strip 1.5x2.0x1000 mm |
1 x | Round Rod 2,0x1000 mm |
1 x | Round Rod 3,0x1000 mm |
1 x | Round Rod 1,5x1000 mm |
1 x | Round Rod 5,0x1000 mm |
1 x | ABS Strip 1.0x4.0x1000 mm |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | Strip 3,5x1,75x330 mm |
1 x | ABS Strip 1.0x3.0x1000 mm |
1 x | Strip ABS 2.0x8.0x1000 mm |
1 x | ABS I Strip 10x5x1000 mm |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Long pinned hinge (6 uds) |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
2 x | Gates hinge |
1 x | Gates hinge aluminium (1 pcs) |
1 x | Jeti Black cap |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Miniature brass strap hinge, 1 m |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | 25 mm reinforced hinge |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
2 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | 15 mm reinforced hinge |
1 x | GameCommander USB Universal |
2 x | Optical RPM Sensor |
2 x | Slave-cable USB Easy Sim |
1 x | RF9 Flight Simulator with Spektrum Controller |
1 x | Interface Realflight Simulator |
2 x | 1/6 Pilot "Cindy" |
3 x | Piloto JET 1:3,5 |
2 x | Pilot "Goose" (Slimline) |
2 x | 1/6 Pilot "Buddy" |
1 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
2 x | 1/12 Pilot "Tom" |
2 x | 1/12 Pilot "Langley" |
2 x | Civilian pilot "Curt" size 9cm (Slimline) |
3 x | Piloto jet 130 mm |
1 x | 1/10 Pilot "Jimmy" |
1 x | Civilian pilot "Joe" size 9cm (Slimline) |
3 x | Pilot "Duke" Legends Series (Slimline) |
1 x | Piloto Jet "Green" 1/6 Scale |
1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
2 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
3 x | 1/6 Pilot "Garry" |
2 x | Futaba male 40 cm extension |
2 x | Extension silicon 30 cm female (Futaba) |
1 x | Extension silicon 35 cm male (Futaba) |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | Extension 100 cm (Futaba) |
2 x | Futaba Female 40 cm extension |
1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | Cable S.BUS 3 salidas 300 mm |
2 x | Xplorer1 anemometro |
1 x | Cabel "Y" 30 cm (Futaba) |
3 x | Premium servo extension 25cm |
1 x | Extension 15 cm (Futaba) |
3 x | Extension PVC 150 cm (Graupner) |
2 x | Extension silicon 100 cm (Futaba) |
2 x | Xplorer4 anemometro |
1 x | Extension 7.5 cm |
1 x | Cable S.BUS 3 salidas 100 mm |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Silicone red 0,25 mm² wire (25 m) |
1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | Extinguisher CO2 - 2 Kg |
1 x | Hitec 30 mm servo rounded arm |
1 x | SAVOX SH 1250 MG servo digi |
1 x | Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg |
1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
1 x | Servo HITEC HS-5585MH |
1 x | Servo Digital HITEC HS-5065 MG |
1 x | Servo HITEC D-955 TW Titanium |
1 x | Servo GO-1053 MG 20.0kg |
1 x | HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos |
1 x | Gear set HITEC HS-65 HB |
1 x | Servo HITEC HS-311 |
1 x | Servo HITEC D954 TW |
1 x | Jodel D.9 BeBe 2.400 mm Kit |
1 x | SERVO S9177SV HV S-Bus2 Programable |
3 x | SERVO DES 568 MG |
1 x | ALU servo arm 3 mm shaft |
1 x | Small pinned hinge (12 uds) |
1 x | Medium pin type hinge (12 uds) |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
2 x | Small flex hinge (12 uds) |
1 x | Micro flex hinge (12 uds) |
3 x | Indoor hinge with servo arm integraded |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
2 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
2 x | ROBART POINT HINGE 4,7mm (5 pcs) |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
2 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
1 x | Large flex hinge (12 uds) |
1 x | DYNAMOMETER S-1580 |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | Cockpit aluminium closing |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
2 x | 1/12 Pilot "Cougar" |
1 x | Pilot JAN 1/4 Saiplanes |
1 x | 1/4 Pilot "Mike" |
2 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | Pilot "Dick" Legends Series (Slimline) |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
2 x | Pilot "Anthony" (Slimline) |
2 x | 1/10 Pilot "Jack" |
1 x | Covered closure or fairings |
1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | Adjustable launching hook |
1 x | Piloto Jet "Red" 1/6 Scale |
2 x | 1/6 Pilot "Tony" |
4 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | 1/6 Pilot "John" |
1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
1 x | TX 250 mW especial GOPRO |
1 x | CNC FPV Display screen&Transmitter Holder Vertical |
2 x | 200 mm extensión servo HITEC/JR |
1 x | Rotor Mast |
3 x | Screws flush mount M2 |
2 x | Tail support (2 pcs) |
1 x | FOD Screen K140G/K180G/K210G |
1 x | Telemetry JETI |
3 x | SERVO DES 707 BB MG, Pignons |
1 x | Bluetooth Adapter JET CENTRAL |
1 x | Fod Guard 73x32 mm |
1 x | Jet Pipe for A-10 Skymaster (set 2 pcs) |
2 x | Rotorshape Elevator |
3 x | Screw M3x16 |
2 x | Blade holder lower |
2 x | Nut M1,6 |
2 x | Bearing 3x6x2,5 |
3 x | Steel Screw M1x8 (10 pcs) |
2 x | Blade holder center |
2 x | Battery plate |
2 x | Rotorhead pushrod |
2 x | Head core |
3 x | Grub screw M3x3 shouldered (2 pcs) |
1 x | Ball joint long |
2 x | Head core bushing |
2 x | Bearing housing |
2 x | Head upper part |
2 x | Baering 3x8x4 |
2 x | Motor wall |
2 x | Head spacer |
3 x | Head lower part New |
1 x | Blades 330mm |
2 x | Balls 4 mm |
2 x | Side rudder |
2 x | Tail boom |
3 x | Washer 2.2×4 |
2 x | Blade Holder Full (4 blades) |
2 x | 4 blades set |
1 x | Blade Holder (3 blades) |
2 x | Fuselage Autogyro RAINBOW |
2 x | Blade Holder Full (3 blades) |
1 x | Pipe Jet REVEL titanio/aluminio |
1 x | SERVO DES 658 BB MG |
1 x | Jet Pipe for ASPIRE 2m JMF |
3 x | Soporte metal para servos |
1 x | Smokelance |
1 x | FOD Screen K45/60/70/85 |
3 x | SERVO DES 707 BB MG |
1 x | Tailormade cone A-10 Skymaster |
1 x | Fod Guard 94x32 mm |
1 x | Servo DITEX TD2612S |
1 x | Telemetry SPEKTRUM |
2 x | SERVO DES 588 BB MG |
1 x | Fod Guard 94x34 mm |
1 x | Variable Flow Smoke Pump System |
2 x | Servo HBS 690BB HV Digital |
1 x | Jet Pipe for ULTIMATUM 2m |
1 x | Fod Guard 83x32 mm |
1 x | Jet Pipe 40N-80N (200 mm) |
1 x | Jet Pipe 160N-250N (120/130 mm) |
1 x | Fod Guard 67x32 mm |
1 x | SERVO DES 806 Pignons |
1 x | Pendulun "Special" to tank 60g |
1 x | 10-15mm Servo Arm |
1 x | Carbon plate 350x150x3.0 mm |
1 x | 10-15mm Servo Arm HITEC |
1 x | Servo GO-1070MG 40 kg.cm 0.10s/60º |
1 x | Adapter 4,0 mm M8 |
1 x | 3,2 mm Prop Adapter M5 |
1 x | Catalog AERO-NAUT 2016 |
1 x | Extension 30 cm (Futaba) |
1 x | Adapter 3,0 mm M5 for spinner 30 mm fixed propeller |
1 x | |
1 x | 6 mm Prop Adapter M8 |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Pin hinge 34x16 mm (10 uds) |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | 5 mm Prop Adapter M8 |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Allen wheel collar M3x3 |
1 x | SIMtransmitter 6 Mode 2 |
1 x | Servo TOPMODEL DS9010 T |
1 x | TrainerCord (master-learner) |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | CC 05 |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
2 x | Stickers-digit for marking |
1 x | Extension silicon 50 cm (Futaba) |
2 x | Servo Fork |
1 x | 18 mm wing servo holder |
1 x | Servo MKS HV747 |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | MPX-Dean "T" Adapter |
1 x | USB HLS prog. interface |
1 x | CC 02 |
1 x | Propeller APC 12x8 SF |
1 x | Propeller APC 10x3,8 SF |
1 x | Propeller APC 10x7 Electric |
1 x | Propeller APC 11x7 SF |
1 x | Propeller APC 10x5.5 MR Electric multirrotor PUSHER |
2 x | Premium servo extension 50cm |
2 x | Premium servo extension 100cm |
1 x | ASPIRE Red ARF 2.000 mm |
1 x | Blade holder upper |
1 x | Wheel keeper washer |
1 x | DRACO 2.0m Wheel set |
1 x | SERVO DES 806 Pignons |
1 x | PPM Encoder Module |
1 x | 5.8G Receiver Helical Antenna with protecting case (SMA plug) 12 |
1 x | Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor |
1 x | Premium servo extension 75cm |
1 x | DRACO 2.0m BNF |
1 x | Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox |
1 x | Xplorer2 anemometro |
1 x | Rudder |
1 x | Raer wall |
1 x | Blade holder center GFK 0,5 mm |
1 x | Nut M2 securing |
1 x | Nut M2 |
1 x | Steering lever |
1 x | Head lower part |
1 x | Head runner |
1 x | Turbo Timber Evolution 1.5m PNP |
1 x | Servo GO-1017MG 4.5 kg.cm 0.10s/60º |
1 x | SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS) |
1 x | Tail tube RAINBOW |
1 x | Servo DITEX EL0510M |
1 x | PITTS CHALLENGER 87″ 2.20m (120cc) 02 ARF |
|
14,762.82EUR |