2 x | Gates hinge |
2 x | 18 mm reinforced hinge |
2 x | Flap hinge (6 pcs) |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Long pinned hinge (6 uds) |
3 x | Pin type hinge Al 6x98 mm (2 pcs) |
2 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | 25 mm reinforced hinge |
2 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
2 x | Nylon hinge 20x15x0,3 (10 pcs) |
3 x | Miniature brass strap hinge, 1 m |
2 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
2 x | Small pinned hinge (12 uds) |
1 x | Gates hinge black 30x16 mm (2 pcs) |
2 x | OSD Telemetry sensor |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
2 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
2 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
5 x | Battery voltage telemetry |
2 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | 15 mm reinforced hinge |
3 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Horn for flap control (1 pcs) |
1 x | Small aluminium horn blue (2pcs) |
1 x | Horn 6/35 with M3 Bearing |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Cable with accesories |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Horn 6/27 with M3 Bearing |
1 x | Horn 13,5x16 mm (2 pcs) |
2 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Horn 5/20 with M2 Bearing |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | 20 mm carbon horn |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | DUPLEX 2.4EX Expander E4 |
1 x | Suport PITOT |
1 x | Pitot tube JETI MSpeed DUPLEX |
1 x | MT 125 temperature sensor |
1 x | FALCON 20X9 CARBON PROPELLER (GAS) |
1 x | Propeller POWER-PROP 14x9 Izda |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | Propeller POWER-PROP 13x9 |
1 x | Propeller POWER-PROP 14x9 |
1 x | Receiver Hitec OPTIMA 9 2.4 GHz AFHSS 9ch |
3 x | Receptor MINIMA 6S HITEC |
1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
2 x | Aro pasacable Ø25 mm (4 pcs) |
2 x | Field folding model stand SebArt |
1 x | Dust collector for mould cleaning |
1 x | Oils Pumps Empty (1 liter) |
1 x | Panasonic Eneloop AA 1,2 V battery 19>00 mAh |
1 x | Medidor ángulos y/o incidencias |
1 x | Propeller balancer |
1 x | Xplorer1 anemometro |
2 x | Surface Indicator Gauge Small |
2 x | Ball Link Plier |
1 x | Hot Glue Stick RED |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
3 x | Bateria LRP 2200-7.2v 6 cell NiMH |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
2 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Bungee HLG Premium |
1 x | R6106 HF 2,4 GHz receiver |
1 x | Big Crow DLE-170M |
1 x | Long pinned hinge (12 uds) |
2 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
2 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Power supply NT 40 Amp. |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | Short extra-strong control horn with bearing 2,8x15 |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Long adjustable aluminium control horn with bearing 2,8x15 |
1 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
1 x | Small adjustable aluminium control horn with bearing 2,8x15 |
1 x | Spinner 90 mm GFK |
1 x | Straightened threaded rod M2-1m |
2 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
2 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | HOPPER tank Digitech 250 ml (Festo nipples 6 mm) |
1 x | Servo GO-1023MG 7.0 kg.cm 0.09s/60º |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
1 x | FOX 3000 mm ARF (FMS) |
1 x | Glider Ka 7 Red (2540mm) |
1 x | Fournier RF-4D |
1 x | Aero-Master (Aero-naut) |
1 x | ENIGMA ARF |
2 x | Chili Race F3K 2 wing servo mounted(carbon biax) |
1 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | 38 mm aluminium spinner. |
2 x | Carbon fiber rod 20 mmx1000 mm |
1 x | BABY glider (Aero-naut) |
1 x | Glider PIROL |
1 x | BALSA trip 5.0x5.0x1000 mm |
2 x | Beech dowels 10 mm x 1000 mm |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Smokelance |
1 x | Servos security connector (2 pcs) |
1 x | LiPo Storage Box Type "BIG" |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Black "FUEL VENT" round aluminum overflow socket |
1 x | TYGON tubo 1 m Diam. 3.4 x 2.0 mm |
1 x | Extension Arm for Carburetor |
1 x | ARS 300 91" ARF 2311mm ORANGE |
3 x | EDGE 540-A 105" (2660 mm) |
1 x | SLICK 360-A 104" (2640 mm) |
1 x | 25 mm Sandpaper file |
2 x | Brazo servo KAVAN doble aluminio 25T - 2.5" M3 |
2 x | BULLIT Wing 1095 mm |
2 x | |
1 x | Conector MT-60 (pair) |
1 x | Dummy motor GPW Wasp Scale 1/4 |
1 x | SkyMaxx 1.550 mm (kit) |
2 x | Combo KAVAN PRO 3536-1000 + RAY 40 SB |
1 x | Cessna SKYLANE T182 1.75m - Seagull Model |
1 x | Concave-Convex sandpaper file 13 mm |
1 x | Sukhoi 29S 2,6 m,CF landing gear(SebART) |
2 x | Sebart 2.2 m YELLOW/BLACK (SebART) |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
2 x | Sebart 2.2 m WHITE/BLUE (SebART) |
1 x | PITTS CHALLENGER 87″ 2.20m (120cc) 02 ARF |
3 x | EDGE 540-A 74" (1880 mm) |
2 x | ROBART POINT HINGE 4,7mm (5 pcs) |
2 x | ULTRA STICK 10 cc ARF |
2 x | EXTRA NG 74" white/red/blue (Skywing RC) |
4 x | SLICK 360-B 104" (2640 mm) |
1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
2 x | EDGE 540-A 91" (2310 mm) |
3 x | EXTRA 330L 35% hardware pack (Precision Aerobatics) |
2 x | SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm |
1 x | Small pinned hinge (6 uds) |
3 x | Robart Door Hinge (Pk2) |
2 x | ULTRA STICK 30 cc ARF |
3 x | PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF |
1 x | Blade holder metal LAMA |
2 x | Battery LiPo GRE18 600 mAh 7.4v |
1 x | Charger SKY RC e680 |
2 x | BULLIT Wing 840 mm |
1 x | Ciano KAVAN Thick 20g |
3 x | CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9) |
1 x | 55 mm aluminium spinner (Kavan) |
1 x | Ciano KAVAN Medium 20g |
2 x | SHOCK CUB 102" 2.600 mm 38-50cc YELLOW (Seagull Models) |
1 x | Cable coupler M2 (10 uds) |
2 x | 10 mm aluminium spinner (Kavan) |
2 x | Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB |
2 x | Combustible Glow "KAVAN" air/heli 5% nitro |
2 x | A/C quality beech plywood 600x300x0.8 mm |
2 x | Combustible Glow "KAVAN" air/heli 10% nitro |
1 x | 60 mm aluminium spinner (Kavan) |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | Birch plywood plate 600x300x2.5 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Debonder CA 20g |
1 x | DOMINO 46-55 Trainer 1583 mm |
1 x | 30 cm DEANS female connector |
1 x | Set freno para ruedas Dia. 127 mm |
1 x | Legs + electric brakes for Viper Jet 1700 mm |
1 x | Fiberglass landing gear for 140-160 |
1 x | Power supply NT 25 Amp. |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | OPTIC 8 opto Rx-servo insulation |
1 x | JETImodel SINGLE BEC |
1 x | Pilatus PC-21 50E BLUE/WHITE (SebArt) |
1 x | LENTUS Multiplex Landig gear retract |
2 x | Wings Bags JEEMO |
1 x | Fuel station 10L incl. pump electric |
1 x | Fuel Station 30L |
1 x | Small control horn with bearing (2 pcs) |
1 x | Socket Screw M3x9 mm |
2 x | Round flex hinge (12 uds) |
1 x | Tip wing protector 30x10 (2 pcs) |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | DUPLEX 2.4EX MFlow2 Gas 800 |
1 x | DUPLEX 2.4 EX MVario2 |
1 x | DUPLEX 2.4EX Central Box 210 |
1 x | DSM 10 Dual Switch Mixer |
1 x | DUPLEX 2.4EX MUI 150 Sensor |
1 x | AddCAP 10AS capacitors |
1 x | Caps multicolor Switch JETI |
1 x | ANGEL 48" pp red/blue/white |
2 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
1 x | ESC MEZON 115 Opto |
1 x | Adaptadores carga 6s JST-XH |
1 x | |
1 x | Rotorshape Autogyro |
1 x | LA500 rotor head shaft |
1 x | Rotorshape Elevator |
1 x | LA500 cyclic central part |
1 x | Blades 330mm |
1 x | Washer 2.2×4 |
1 x | Motor rotor LA-500 |
1 x | Balls 4 mm |
1 x | Spinner 42 mm EXTRA 330SC |
1 x | Canopy Sweet / Siesta |
1 x | Fuselage Bags JEEMO |
1 x | MULTIPLEX - TUNING SPINNER (67MM) FOR MULTIPLEX FUNRACER |
1 x | JEEMO Kit ARF Basic (2 color) - XTRALIGHT |
1 x | Wing OXY 0,5 pulgadas2 |
1 x | Electric starter suitable for the DLE111, DLE120 and DLE85. |
1 x | Fuel station 20L incl. pump electric |
1 x | EDGE 540 1.73m SEAGULL Model |
2 x | Servo inverter |
2 x | Antenna holder bracket double |
2 x | WingFix ULTRA Black Edition |
2 x | Servo inverter |
2 x | RX external cable for estandar receivers |
2 x | Balsa panel 10x100x1000 mm |
2 x | Rubber wheel Ø 58mm x 21mm (2pcs) axis Ø 2.6mm |
2 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
2 x | BALSA trip 2.0x2.0x1000 mm |
2 x | Rubber wheel Ø 50mm x 24mm (2pcs) axis Ø 3.1m |
1 x | RH long aluminium horn (2pcs) |
1 x | Servo GO-02 Digital 1.8g |
1 x | Sealing Iron Sleeve STD |
1 x | Large flex hinge (12 uds) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Micro flex hinge (12 uds) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Electric Fuel Pump 12v |
1 x | Conector MR-60 (pareja) |
1 x | Glow starter with charger 230v |
1 x | RV-8 60E Super PNP Night Green |
1 x | PS-050 TONEGAWA Servo |
1 x | Parachute XTRALITE S |
1 x | O-Ring SAITO FG-60 R3 |
2 x | Bags de Luxe ASPIRE |
1 x | Chili Race F3K (aramid nose) |
2 x | Regulador Hobbywing Platinum PRO 130A-HV V4 |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Rescue 1,8m2 / BackPack |
1 x | Rubber wheel Ø 50mm x 18mm (2pcs) axis Ø 2.6mm |
1 x | Sealing Iron STANDARD |
1 x | Servo arms set HS-60/81/85/5082MG/5085mg |
1 x | BALSA triangular 10x10x1000 mm |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | Servo arms set HS-65HB/MG/5065MG |
1 x | Rudder forward 70x28 "type Kato" |
1 x | Rudder forward 80x28 "type Kato" |
1 x | Servo arms set 40/50/55/5055 MG |
1 x | Bags wings/rudder ODYSSEY |
1 x | Balsa panel 8.0x100x1000 mm |
1 x | Bags de Luxe ODYSSEY |
1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Gates hinge aluminium (1 pcs) |
1 x | Medium pin type hinge (12 uds) |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
2 x | Pin hinge 34x16 mm (10 uds) |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Ball Bearing Oil 25 ml |
1 x | PARAGON Trainer 46-55 1580 mm |
2 x | Pin hinge 39x20 mm (10 uds) |
1 x | Mitsubishi ZERO AM6 91 ARTF |
1 x | Battery Protection Circuit Board 22.2v 6s |
1 x | Rubber wheel Ø 45mm x 16mm (2pcs) axis Ø 2.1m |
1 x | Regulador Hobbywing Platinum 260A HV SBEC V5 |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | BALSA trip 10x10x1000 mm |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Balsa panel 3.0x100x1000 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Sealing Iron Profi LCD |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Rudder forward 90x28 "type Kato" |
1 x | Balsa panel 6.0x100x1000 mm |
1 x | Rubber wheel Ø 70mm x 27mm (2pcs) axis Ø 3.6mm |
1 x | Balsa panel 4.0x100x1000 mm |
2 x | Baseplate servo |
1 x | Screw M2.5x10 (10 pcs) |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | Sensor Ignition RCEXL Universal |
1 x | Selfstart electronic switch |
1 x | Roller cutter 28 mm |
1 x | Rubber wheel Ø 38mm x 13mm (2pcs) axis Ø 2.1mm |
1 x | Bags MB-339 (Wings & Elevators) |
1 x | SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm |
1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
2 x | KAVAN Hand crank fuel pump |
1 x | Servo GO-10S41MG 10.5 kg.cm 0.075s/60º |
2 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Servo GO-1088MGW 74 kg.cm 0.125s/60º |
1 x | Fully Threaded Steel Rod M3 |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Servo GO-1081 MG 45 kg.cm 0.085s/60º |
1 x | Combo KAVAN C3536-1250 + KAVANA R50SB + |
1 x | Glow Plug Clip 1.3 Ah |
1 x | Program Card KAVAN ES |
1 x | Flybar support metal LAMA |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | Engine mounts for .09 - .19 engine |
1 x | Ciano KAVAN Super Thin 20g |
1 x | Pilatus PC-21 2100 mm RED/WHITE (SebArt) |
1 x | Pilatus PC-21 + LG.2100 mm RED/WHITE (SebArt) |
1 x | Westland Lysander 50cc ARTF |
|
66,945.51EUR |