2 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | 18 mm reinforced hinge |
2 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
2 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
2 x | Large flex hinge (12 uds) |
1 x | Small pinned hinge (12 uds) |
2 x | 25 mm reinforced hinge |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
2 x | Nylon hinge 15x0,3 (10 pcs) |
3 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
2 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
2 x | Gates hinge |
2 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
2 x | Nylon hinge 20x15x0,3 (10 pcs) |
2 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
2 x | Micro flex hinge (12 uds) |
2 x | Flap hinge 33x9 mm (6 pcs) |
2 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
2 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
2 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
2 x | 15 mm reinforced hinge |
2 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
2 x | Nylon hinge for flaps 33x9 (2 pcs) |
2 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Stickers-digit for marking |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | Quicklock washer 2 mm (10 pcs) |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Lock washer 2.7 mm (20 pcs) |
1 x | Circlik for shaft 1.2 mm (10 pcs) |
1 x | Quicklock washer 1 mm (10 pcs) |
2 x | Ventus 1:4 set of instruments |
1 x | Quicklock washer 3 mm (10 pcs) |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | Profile ABS Square 4 x 1000 mm |
2 x | ABS angle 10,0x10,0x1000 mm |
1 x | T-Connector 4.0 mm x 1000 mm |
1 x | Profile ABS half cane 2.5x1000 mm |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | Glases Moritz |
2 x | WingFix ULTRA Black Edition |
1 x | Field folding model stand |
1 x | Propeller balancer |
1 x | Surface Indicator Gauge Small |
1 x | Glases Ace |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Glases Flitemaster |
1 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
1 x | Angle of incidence meter |
1 x | Glases Aspen |
1 x | Glases Stratus |
1 x | Propeller balancer |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Round Rod 1,25x1000 mm |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Xplorer4 anemometro |
1 x | Support pump Xicoy X45 |
2 x | Pin hinge 39x20 mm (10 uds) |
1 x | Support Antena 2.4 Ghz (2 pcs) |
2 x | Actuador lineal HLS12-100210-7.4v |
2 x | LA500 freewheel bearing |
2 x | Baal link 4/14/4 (5 pcs) |
1 x | Side rudder |
3 x | Long pinned hinge (12 uds) |
1 x | LA500 Autogyro |
1 x | Rotor Mast |
2 x | Long pinned hinge (6 uds) |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | L-Connector 1.0 mm x 1000 mm |
1 x | L-Connector 4.0 mm x 1000 mm |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | ABS angle 6,0x6,0x1000 mm |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | 20x200 mm battery rings |
1 x | SE Ring 330 mm (4 pcs) |
1 x | |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | SE Ring 350 mm (2 pcs) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | SE Ring 480 mm (2 pcs) |
1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
1 x | Servo GO-1013 MG 3.8kg |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Styrene plate 320x120x0.5 mm |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Release film 100 cm x 50 m |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Styrene plate 320x120x1.0 mm |
1 x | Tip wing protector 40x14 (2 pcs) |
1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Servo GO-10S41MG 10.5 kg.cm 0.075s/60º |
1 x | LASER 260 60" V2 ARF Yellow (SkyWing) |
1 x | ANGEL 48" pp red/blue/white |
1 x | Lipo KAVAN 5000 mAh 11.1v 40/80C |
1 x | Profile ABS half cane 6.0x1000 mm |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | Rubber profile 6-2 mm 2M |
1 x | Profile ABS half cane 5.0x1000 mm |
1 x | Profile ABS half cane 2.0x1000 mm |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | LA500 cyclic central part |
1 x | LA500 rotor head shaft |
1 x | Motor A50-10L Turnado V3 Glider |
1 x | Motor A10-7 L 4,4:1 |
1 x | Backmountset complete A40 |
1 x | A50 Backmountset complete |
1 x | Flap hinge (6 pcs) |
1 x | Motor A30-10 XL V4 |
1 x | Motor A60-5XS V4 28-pole kv420 |
1 x | Motor A40-10S V4 14-Pole |
1 x | LA500 housing-lower cyclic |
1 x | LA500 pre-rotation gear |
1 x | LA500 housing-upper cyclic |
1 x | LA500 front gear holder |
1 x | LA500 tail empennage |
1 x | LA500 pilot-seat set |
1 x | Pilot LA 500 |
1 x | LA500 Blades |
1 x | Motor rotor LA-500 |
1 x | Motor B20-10 L + 4:1 gearbox |
1 x | Motor A20-20 L EVO |
1 x | Axle for motor A20-S (3 uds) |
1 x | A50 Backmountset complete V3/V4 |
1 x | Motor A60-7XS V4 28-pole kv330 |
1 x | Motor A50-14 L 8-Polos Electric turbine |
1 x | Motor A200-8 |
1 x | Motor A50-12 L V4 |
1 x | Motor A20-6 XL 10-Pole EVO + 4,4:1 |
1 x | Axle for motor A50-L |
1 x | Motor A50-16 S V4 |
1 x | A40-10S V2 8-Pole + 6,7:1 PG |
1 x | Indoor hinge with servo arm integraded |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Motor A50-12 L Glider |
1 x | Miniature brass strap hinge, 1 m |
1 x | Bearings for motors hacker A50 |
1 x | Motor A200-6 |
1 x | Motor A20-20 L EVO |
1 x | Motor B20-18 L + 4:1 gearbox |
1 x | Pin hinge 34x16 mm (10 uds) |
1 x | Motor A40-14 L 14-Pole V4 |
1 x | A50 Backmountset complete |
1 x | Medium pin type hinge (12 uds) |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | A40 Backmountset complete |
1 x | Motor A40-10 L V2 14-Pole Glider |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Motor A60-6XS V4 28-pole kv370 |
1 x | Motor A30-12 L V4 |
1 x | Motor A30-12 XL Glider |
1 x | Motor A20-22 L EVO |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Propeller APC 10x7 Electric |
1 x | Propeller APC 12x10 Electric |
1 x | Propeller APC 10x5.5 MR Electric multirrotor |
1 x | Propeller APC 14x12 Electric |
1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
2 x | Servo GO-13 MG 13g 2.8 Kg 0.12s/60º |
1 x | Suncover 100cc Red |
1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
1 x | ANGEL 48" pp orange/black/white |
1 x | SyRen 50A 6V-30V Regenerative Motor Driver |
1 x | Servo GO-1073MGW 32 kg.cm 0.135s/60º |
1 x | Servo GO-1280 MG 40 kg.cm 0.085s/60º |
1 x | SyRen 10A 6V-24V Regenerative Motor Driver |
1 x | Propeller APC 12x6 SF |
1 x | Propeller APC 10x7 SF |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Rescue 1,8m2 / BackPack |
1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
|
9,782.13EUR |