| 2 x | Cinta fibra carbono 25 mm 3k 125 g/m2 x 50m |
| 2 x | Hoja de sandwich de fibra de carbono 350x150x3 mm |
| 2 x | Plancha aluminio 500x250x0.5 mm |
| 2 x | Fibra carbono tela 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 2 x | Film perforado 145 cm / 50 m |
| 1 x | Manta bolsa de vacio 150 gr/m2 Bobina 100 m |
| 1 x | Manta bolsa de vacio 150 gr/m2 Bobina 50m |
| 3 x | Camara 800 TVL CMOS para FPV |
| 2 x | Plancha ABS 500 x 400 x 2,0 mm (blanco) |
| 1 x | Film perforado 100 cm / 50 m |
| 1 x | Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 3 x | Manta bolsa de vacio 300 gr/m2 Bobina 1m |
| 2 x | ARAMID panel nido de abeja 1300x2600x2 mm |
| 3 x | Cámara Sony 4140+673 CCD Board con emisor 5,8 GHz 200mw + antena |
| 1 x | Film perforado 100 cm / 10 m |
| 2 x | Plancha ABS 500 x 400 x 1 mm (blanco) |
| 1 x | Fibra carbono "MANGA" 12k 170 mm x 5 m |
| 3 x | Cinta fibra carbono 25 mm 3k 125 g/m2 x 10m |
| 2 x | Camara USB micro endoscopica |
| 2 x | Fibra carbono tela 160g/m2 100 cm x 2 m |
| 2 x | Plancha ABS 500 x 400 x 1,5 mm (blanco) |
| 1 x | Sistema cierre HACKER 300 mm con abrazadera (2 pcs) |
| 1 x | Cinta SURFACE 21mm x 5m |
| 2 x | Cinta fibra vidrio 50 mm |
| 1 x | Sistema cierre 320 mm largo (5 pcs) |
| 1 x | Sistema cierre Mini 14x60 mm (4 pcs) |
| 1 x | Soporte para bridas de hasta 3 mm (10 pcs) |
| 1 x | Sistema cierre 480 mm con abrazadera (2 pcs) |
| 1 x | Cinta autoadhesiva 26 mm x 16.80m; Diente 1.0 mm |
| 1 x | Soporte para bridas hasta 3 mm (0,12") para tornillo M3 (10 pcs) |
| 1 x | Cinta Goldfix 1m |
| 1 x | Sistema cierre 350 mm con abrazadera (2 pcs) |
| 1 x | Cinta tubuladora (5 m) |
| 1 x | Sistema cierre 450 mm con abrazadera (2 pcs) |
| 1 x | Cinta alerones 1m x 10mm |
| 1 x | Cinta autoadhesiva 5 mm x 16.80m; Diente 0.5 mm |
| 2 x | Sistema cierre 360 mm con abrazadera (2 pcs) |
| 1 x | Sistema cierre 400 mm con abrazadera (2 pcs) |
| 2 x | Sistema cierre 240 mm con abrazadera (2 pcs) |
| 1 x | Sistema cierre negro doble cara 20x1000 mm |
| 2 x | Cinta fibra vidrio 38 mm |
| 1 x | Cinta RUDDOG proteccion calor 2m x 50 mm |
| 1 x | Sistema cierre baterías 20x200 mm |
| 1 x | Cinta autoadhesiva 13 mm x 16.80m; Diente 1.0 mm |
| 1 x | Cinta autoadhesiva 20 mm x 12m; Diente 1.0 mm |
| 1 x | Bridas 1,66x71 / 0,07x2,8"mm (20 pcs) |
| 1 x | Fibra carbono tela 68 g/m² (Aero, plain weave) 100 cm x 0.5m |
| 1 x | AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (20 pcs) |
| 1 x | AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (5 pcs) |
| 1 x | Cinta fibra carbono 50 mm 3k 200 g/m2 x 10m |
| 2 x | Manta bolsa de vacio 150 gr/m2 Bobina 5 m |
| 1 x | Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | Fibra carbono tela 160g/m2 127 cm x 10 m |
| 1 x | Manta bolsa de vacio 150 gr/m2 Bobina 20m |
| 1 x | Cinta fibra Carbono 125 g/m², 3k, UD (100 mm) roll/ 50 m |
| 2 x | Fibra carbono tela No-cruzada ST 100g/m2 50 cm x 10 m |
| 2 x | Pegatinas números para marcar |
| 1 x | Corona pequeña autoarranque DLE-170M |
| 1 x | Silent-blocks DLE 170M |
| 1 x | Motor DLE 430 cc - Paramotores |
| 1 x | Motor DLE 170 M - Paramotores |
| 1 x | Corona grade autoarranque DLE-170M |
| 1 x | Motor DLE 200cc Std |
| 1 x | Motor DLE 200cc Premium Muffler |
| 1 x | Conector doble con soporte JR con prolongación 200 mm |
| 1 x | Cartuchos de humo AX-60 rojo (5 pcs) |
| 1 x | Kit de montaje "S" para barco |
| 1 x | Set de Humo "M" |
| 1 x | Funda Protectora cables Ø 3 mm 1000 mm |
| 1 x | Cinta fibra de vidrio 49 g/m2 5cm x 100m (plain weave) |
| 1 x | Silicona adhesiva ELASTOSIL E4 tube 90ml |
| 1 x | Conector "T" 6-6-6 mm tubo bomba vacio |
| 1 x | Cuña desmoldeo roja (5 pcs) [40x20mm] |
| 1 x | Prolongador silicona 25 cm (Graupner) |
| 1 x | Cierre cabina tipo FOX MDM1 4m (1 par) |
| 1 x | Gafas Innovation Plus |
| 1 x | Gafas Moritz |
| 1 x | Adaptador de hélice 2,3 mm M5 |
| 1 x | Adaptador de hélice 2 mm M5 |
| 1 x | Adaptador de hélice 5 mm M6 |
| 1 x | Adaptador de hélice 6 mm M8 |
| 1 x | Plancha carbono 550x350x3.0 mm ECOTECH |
| 1 x | Plancha carbono 350x150x1.5 mm |
| 2 x | Plancha fibra vidrio 350x150x1.5 mm |
| 1 x | Fibra de vidrio picada 3mm (1 Kg) |
| 1 x | Fibra carbono tela No-cruzada ST 200g/m2 50 cm x 10 m |
| 1 x | Plancha termoformable 0,3 mm (0,039") DIN A4 |
| 1 x | Plancha carbono 550x350x1.0 mm ECOTECH |
| 4 x | Plancha estireno 320x120x0.5 mm |
| 1 x | Cinta Roving carbono 20m |
| 3 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
| 2 x | Plancha PVC 320 x 194 x 0,23 mm (marrón) |
| 1 x | Fibra de vidrio picada 3mm (200g) |
| 1 x | Suncover 100cc Red |
| 1 x | Plancha carbono 350x150x4.0 mm |
| 1 x | Plancha carbono 550x350x2.5 mm ECOTECH |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 10 m |
| 1 x | Plancha carbono 350x150x3.0 mm |
| 1 x | Plancha fibra vidrio 1200x1000x0,2 mm |
| 1 x | Manga de fibra de vidrio Ø 20 mm x 20m |
| 3 x | Plancha fibra vidrio 620x540x2,0 mm |
| 2 x | Plancha de goma espuma (310x210x5 mm) |
| 1 x | Plancha fibra vidrio 350x150x2.0 mm |
| 1 x | Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl |
| 1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
| 1 x | Fibra de vidrio 100 g/m² (50 m x 100 cm) |
| 1 x | Trompetilla admisión carburador WALBRO 20-80cc (rojo) |
| 1 x | Instrumentos individuales 1/4 Planeador |
| 1 x | Caja de válvulas DA 50-R |
| 1 x | Sistema cierre 200 mm con abrazadera (2 pcs) |
| 1 x | Cinta fibra vidrio 25 mm |
| 1 x | AIREX® M060 lámina (amarilla) 1200x550x6,0 mm (5 pcs) |
| 1 x | Alambre de cobre esmaltado en rojo Ø0,2 mm (5 m) |
| 1 x | CC 02 |
| 1 x | Adaptador JST-XH |
| 1 x | Prolongador equilibrador Thunder Power 6S |
| 1 x | Prolongador macho/hembra equilibrador Thunder Power 6S |
| 1 x | Adaptador 4 LiPos XH>EH |
| 2 x | Adaptador (GP/KO hasta 4S) para CellPRO 4S |
| 1 x | Conector AWG Hembra 6 pines |
| 1 x | PSC 5 |
| 1 x | Prolongador 2/3 lipos conector JST/C |
| 1 x | Adaptador TP/TopFuel - JST-EH 4/5S |
| 1 x | Cable "Y" carga 4 mm (2 IN-1 OUT) |
| 1 x | Plancha fibra vidrio 620x540x3,2 mm |
| 2 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
| 1 x | Plancha termoformable 0,1 mm (0,004") DIN A5 |
| 1 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
| 1 x | Plancha fibra vidrio 350x150x2.5 mm |
| 2 x | Plancha fibra vidrio 350x150x4.0 mm |
| 2 x | Release film 100 cm x 50 m |
| 1 x | Rodillo teflon 80 mm x 15 mm Diam. |
| 1 x | Plancha fibra vidrio 350x150x3.0 mm |
| 1 x | FUNRAY RR Planeador |
| 1 x | IKURA 4.0 m |
| 1 x | Albatros rojo/blanco (Top Model) |
| 1 x | IKURA GPS 4.28 m |
| 1 x | ASG 32 560 mm |
| 1 x | Prolongador 5 lipos conector JST - JST/C |
| 1 x | Cable BEC 30 cm (hembra) |
| 1 x | Cristal RX 35.120 Ch 72 |
| 1 x | Cristal de Emisora 35 Mc/s Ch 77 |
| 1 x | Adaptador de hélice 3.2 mm M6 |
| 1 x | Repelente agent PVA 250 ml |
| 1 x | Plancha de goma espuma (310x210x2 mm) |
| 1 x | Plancha de balsa 8,0x100x1000 mm |
| 1 x | Combustible Glow "KAVAN" air/heli 10% nitro |
| 1 x | Fibra de vidrio 25 g (2 m²) |
| 1 x | Activador CA 150 ml |
| 1 x | Fibra de vidrio 25 g/m² (1 m²) |
| 2 x | Hoja Depron Aero 1250x800x3 mm |
| 1 x | Adaptador de hélice 2 mm M6 |
| 1 x | Bisagra papel CA (12 uds) |
| 1 x | Biberon 500 ccm Glow |
| 1 x | BULL MØ1 2.600mm "ALPINE" |
| 1 x | Fibra carbono tela 240g/m2 100 cm x 2 m |
| 1 x | Plancha carbono 550x350x1.5 mm ECOTECH |
| 1 x | Fibra vidrio 80g/m2 (100cm x 20m) plain |
| 1 x | Adaptador frontal para AXI53xx |
| 1 x | Cono 40 mm aluminio (Kavan) |
| 1 x | Plancha termoformable 0,5 mm (0,02") DIN A4 |
| 1 x | Plancha fibra vidrio 620x540x1,0 mm |
| 1 x | Cinta de sellado al vacío, 2,5 x 12 mm (hasta 140 ° C) 22 rollos |
| 1 x | Deposito GFK Opus/Jet 300 ml |
| 1 x | Plancha fibra vidrio 620x540x0,3 mm |
| 1 x | ULTIMATUM 2.0 m orange/blue |
| 1 x | ULTIMATUM 2.0 PRO "McLAren" |
| 1 x | ULTIMATUM 2.0 PRO "Full Carbon Red" |
| 1 x | PET film Mylar® A 350, 50 cm, roll/ 2 m |
| 1 x | Fibra de vidrio 49 g/m² (1,27 x 10m) |
| 1 x | Peel Ply liso 95 g/m2 100 mm x 100 m |
| 1 x | Sun Cover PC 21 XXL (JMB Jets) |
| 1 x | Plancha carbono 350x150x5.0 mm |
| 1 x | BULL MØ1 2.600mm "RED BULL" |
| 1 x | Fibra de vidrio 25 g/m² 5000x1270 mm |
| 1 x | Conector FESTO "Y" 3mm |
| 1 x | Racor 2/3 mm |
| 1 x | Hélice 9x7 SlowFlyer |
| 1 x | Carburador WALBRO para MVVS 26/30/35/40 cc |
| 1 x | Cinta adhesiva impermeable, ancho 19 mm, largo 25 m |
| 1 x | Brazo aluminio ext. carburador (rojo) |
| 1 x | Helice FIALA 19x12 Electric |
| 1 x | Hélice MENZ-S 20x6 Pusher |
| 1 x | Alambre de cobre esmaltado en negro Ø0,2 mm (5 m) |
| 1 x | MAX BEC 2 |
| 1 x | Hélice tripala 27x12 carbono Super Silence |
| 1 x | Switch electronico SXH HV |
| 1 x | DPSI Micro-DualBat 5.9V / 7.2V MPX-JR (Alimentación doble) |
| 1 x | Cristal Universal RX 35.020 Ch 62 |
| 1 x | Cristal Universal RX 35.130 Ch 73 |
| 1 x | Brazo de servo 40 mm con rodamiento (2 pcs) |
| 1 x | Micro Cristal RX 35.120 Ch 72 |
| 1 x | F9F Panther Cabina (Aero-naut) |
| 1 x | Cancamo con aro 16/6.5 mm (10 pcs) |
| 1 x | Adaptador PH5 para eje de 5mm M8 para AXI2820 y 2826 |
| 1 x | Conector FESTO "T" 3-3-3mm |
| 1 x | Anillo espaciador para hélice graupner 8/5.5 mm |
| 1 x | Conector FESTO "T" 3mm |
| 1 x | Conector FESTO 6-6mm |
| 1 x | Grifo FESTO 4-4 mm |
| 1 x | Racor 4/3 mm |
| 1 x | Hélice 3x2 |
| 1 x | Helice FIALA 15x8 3-Blade |
| 1 x | Hélice MENZ-S 20x12 |
| 1 x | Alambre cobre esmaltado 3 hilos trenzados rojo/negro/cobre Ø0,2 |
| 1 x | Conector alas/fuselaje PWC6 para 6 servos |
| 1 x | PowerBox SparkSwitch RS |
| 1 x | Hélice 28x12 Super Silence |
| 1 x | Interruptor SAFET-SWITCH 12HV Twinbatt |
| 1 x | DPS Interruptor JR/JR |
| 1 x | Hélice tripala 20x12 carbono Super Silence |
| 1 x | Conector alas/fuselaje para 16 pines AWG 20-24 |
 |
| 50,810.76EUR |
