| 1 x | Stickers-digit for marking |
| 2 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
| 2 x | DYNAMOMETER S-1580 |
| 1 x | Optical RPM Sensor |
| 1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | BALSA triangular 6x6x1000 mm |
| 1 x | GameCommander USB Universal |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | RF9 Flight Simulator with Spektrum Controller |
| 1 x | Liston HAYA 3 x 10 x 1000 mm |
| 3 x | SIMtransmitter 6 Mode 2 |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | Profile ABS Square 1 x 1000 mm |
| 1 x | Cross Connector 4.0 mm x 1000 mm |
| 1 x | ABS "T" angle 4.0x4.0x1000 mm |
| 1 x | Profile ABS half cane 3x1000 mm |
| 2 x | Profile ABS Square 2 x 1000 mm |
| 1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
| 1 x | ABS "T" angle 6.0x6.0x1000 mm |
| 2 x | Profile ABS Square 4 x 1000 mm |
| 2 x | ABS "T" angle 8.0x8.0x1000 mm |
| 1 x | U Profile ABS 1,0x2,0x1000 mm |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 1 x | Carbon roving DowAksa / 24k / 1600 tex |
| 2 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 1 x | Vacuum bag, 1200 mm x 50 m |
| 2 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
| 1 x | Carbon fiber rod 16 mm x 1000 mm |
| 1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
| 1 x | Straightened rod Ø 1.5 mm x 1000 mm |
| 1 x | Para-RC "RC-Evo-Cross" Rescue |
| 1 x | Parachute expulsion foam |
| 1 x | Ventus 1:4 set of instruments |
| 1 x | 1/4 Pilot "Heidi" |
| 1 x | Strip 3,5x1,75x330 mm |
| 1 x | Round Rod 2,5x1000 mm |
| 1 x | ABS I Strip 10x5x1000 mm |
| 1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | Birch plywood plate 600x300x1.2 mm |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | Carbon plate 550x350x1.0 mm ECOTECH |
| 1 x | A/C economy plywood 600x300x6+.0 mm |
| 2 x | Birch plywood plate 600x300x3.0 mm |
| 3 x | Carbon plate 350x150x3.0 mm |
| 2 x | SyRen 10A 6V-24V Regenerative Motor Driver |
| 1 x | Profile ABS half cane 5.0x1000 mm |
| 1 x | Rubber profile 6-2 mm 2M |
| 1 x | T-Hose connector 4-4-4mm |
| 1 x | Air pressure gauge |
| 1 x | Quick hose connector 3-3 mm |
| 1 x | Wheel collar 2 mm Ø (4 uds) |
| 1 x | Landing gear axle Ø 4 mm (2 uds) |
| 2 x | Wheel cover holder Ø 5 mm (2 uds) |
| 1 x | Y-Hose connector 6-6-6 mm |
| 1 x | 40 mm air cylinder |
| 2 x | Quick hose connector 4-4 mm |
| 1 x | Landing gear strap medium (4 uds) |
| 1 x | Fail Safe air retract |
| 1 x | Tap FESTO 4-4 mm |
| 1 x | T-Hose connector 3-3-3 mm |
| 1 x | Servo arm with 5 mm hole to FEMA 9810A |
| 1 x | Body for landing gear Ø 3 mm |
| 1 x | Y-Hose connector 4-4-4mm |
| 1 x | Body for landing gear Ø 4 mm |
| 2 x | Quick hose connector 3-3 mm |
| 1 x | Sanyo RX Battery Eneloop 4,8 V JR |
| 1 x | RX Battery Eneloop 6,0 V JR 2500 mAh |
| 1 x | Sanyo RX Battery Eneloop 4,0 V AAA JR |
| 1 x | T-Hose connector 6-6-6 mm |
| 1 x | Wheel cover holder Ø 3 mm (2 uds) |
| 1 x | Profile ABS half cane 6.0x1000 mm |
| 1 x | Profile ABS triangular 4.0x1000 mm 90º |
| 1 x | Profile ABS half cane 2.0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
| 1 x | U Profile ABS 5,0x10,0x1000 mm |
| 1 x | Glass fibre sleeve Ø 20 mm X 10m |
| 1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | Fiberglass plate 350x150x1.5 mm |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | PET film Mylar® A 350, 50 cm, roll/ 5 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
| 1 x | Glass fibre sleeve Ø 20 mm X 20m |
| 1 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
| 1 x | PET film Mylar® A 350, 50 cm, roll/ 2 m |
| 1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
| 1 x | Glass fabric 280 g/m² (twill weave) 100 cm, roll 50 m |
| 1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
| 1 x | Foam plastic plates (310x210x5 mm) |
| 1 x | Fiberglass 163 g/m² 1m x 5 m (Twill) |
| 1 x | Propeller Pleg CAM Carbon 11x6 |
| 1 x | Carbon fibre sandwich sheet 350x150x3 mm |
| 1 x | ABS 500 x 400 x 0,5 mm (white) |
| 1 x | Battery LiFe -2100/25C-3S 9.9V |
| 1 x | Jun-Si iCharger 4010 Duo |
| 1 x | Profile ABS half cane 7.0x1000 mm |
| 1 x | Carburador OS (Type 40K) 46AXII |
| 1 x | Servo arm with 6 mm hole to FEMA 9800A |
| 1 x | Racor "Y" 3 mm |
| 1 x | KIRA 600-16 |
| 1 x | Y-Hose connector 3-3-3 mm |
| 1 x | 4 LiPo XH>EH adapter |
| 1 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
| 1 x | 3,2x1000 mm 2:1 red termoretract tube |
| 1 x | 1,6x1000 mm 2:1 red termoretract tube |
| 1 x | 1,2x1000 mm 2:1 black termoretract tube |
| 1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
| 1 x | 2,4x1000 mm 2:1 green termoretract tube |
| 1 x | 2,0x50 mm allen screwdriver |
| 1 x | AXI 2814/16 V2 |
| 1 x | AXI 2820/14 V2 Long |
| 1 x | Bomba KP500V Kingtech |
| 1 x | KingTech T-Modul 5 in 1 Telemetry |
| 1 x | Battery LiFe -3000/25C-3S 9.9V |
| 1 x | Turbina KINGTECH K180 G4+ |
| 1 x | Peel ply 95 g/m² (plain weave) 20 mm x 100 m |
| 1 x | Glass fibre sleeve Ø 20 mm |
| 1 x | Exhaust K45TP |
| 1 x | Peel ply 93 g/m² (plain weave) 150 cm x 5m |
| 1 x | Rubber profile 8-2 mm 2M |
| 1 x | KIRA 480-43 5,2:1 |
| 1 x | PYRO 800-40 Long Axi |
| 1 x | Y-Hose connector 4mm |
| 1 x | Captador OS GT 33 cc |
| 1 x | DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV) |
| 1 x | PYRO 900-52L |
| 1 x | Wheel collar 4 mm Ø (4 uds) |
 |
| 12,819.61EUR |
