1 x | Stickers-digit for marking |
2 x | Blind nut M4 (4 pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
2 x | 30 cm BEC cable (female) |
3 x | Cabel charger transmitter GRAUPNER |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
2 x | Connector Sub-D 2+5 Male |
1 x | 15 mm floating pad (30 pcs) |
2 x | DPS Switch JR/JR |
2 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
2 x | Adapter lead MPX/XT60 |
2 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
2 x | Cabling for Fox MDM1 wings |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
2 x | Aluminium cap bolt washer M3 black (8 pcs) |
2 x | 10 mm floating pad (72 pcs) |
1 x | 5 LiPo XH>EH adapter |
1 x | CC 01 |
1 x | Circlick securite |
1 x | Aluminium M2x12 mm screw (4 pcs) |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
2 x | Adapter lead MPX/EC3 |
1 x | Glases Nimbus |
1 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
3 x | Beech dowels 2.0 x 1000 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | A/C quality beech plywood 600x300x8.0 mm |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | BALSA trip 10x10x1000 mm |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Smoke set "S" |
1 x | ABS tube 14.0x10.0x1000 mm |
1 x | Monokote BLUE metalizado (1.8x0.65m) |
1 x | Extension silicon 35 cm (Futaba) |
1 x | L-Connector 4.0 mm x 1000 mm |
1 x | Futaba Female 40 cm extension |
1 x | PIX Hawk with accesories |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
1 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | wing/fuselage connector for 16 pines AWG 20-24 |
1 x | SBEC 40 |
1 x | Opto Gas Engine Kill Switch |
1 x | Screw M2x6 (10 pcs) |
1 x | Nylon Screw M4x20 |
1 x | Nut for mounting M3 (4 pcs) |
1 x | Spring pin Ø 1 x 6 mm (10 pcs) |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Titanium M3x0,5x8 mm Flat Head screw (4 pcs) |
1 x | 4 LiPo XH>EH adapter |
1 x | Double conector with JR adapter and 200 mm extension |
1 x | DPSI magnetic switch actuator (housing) |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Tapping Screw M2.2x9.5 (10 pcs) |
1 x | Quicklock washer 4 mm (10 pcs) |
1 x | Extension 5 lipos JST - JST/C |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | 30 cm BEC cable (male) |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | CC 03 |
1 x | Nut for mounting M2,5 (4 pcs) |
1 x | Threaded insert M3 (4 pcs) |
2 x | Quicklock washer 3 mm (10 pcs) |
1 x | Servo M2x9/16 screw (4 pcs) |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | Socket Screw M2x3 mm (4 pcs) |
2 x | Socket Head Screw M2x8 |
2 x | Screw M4x12 (10 pcs) |
1 x | CM-3 |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
2 x | Threaded insert M4 (4 pcs) |
2 x | DORNIER DO 335 EP ARF 1724 mm |
2 x | ALU double servo arm 3 mm shaft |
3 x | Birch plywood plate 600x300x2.0 mm |
1 x | Skyray (RBC Kits) |
1 x | CRACK YAK (Mini) 600 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
2 x | OBECHI sheet 2.0x3.0x1000 mm |
2 x | Liston HAYA 10 x 10 x 1000 mm |
2 x | Birch plywood plate 600x300x1.5 mm |
1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
2 x | Lite Plywood panel 600x300x2.0 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | Pilatus PC-21 2100 mm BLUE/WHITE (SebArt) |
2 x | Servo AN-8 HBA |
1 x | Servo AN-20 MGBBA |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | CHALLENGER Indoor |
1 x | SF260 SIAI MARCHETTI 50E red/white (SebArt) |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Pilatus PC-21 50E, wings carrying bags (SebArt) |
1 x | Motor Set CHALLENGER Indoor |
2 x | Beech dowels 10 mm x 1000 mm |
1 x | PIT (Aero-Naut) |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
2 x | SF260 SIAI MARCHETTI 50E yellow/black (SebArt) |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Birch plywood plate 600x300x1.2 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Tail support (2 pcs) |
3 x | Steering lever |
1 x | Bearing housing |
2 x | Head core |
2 x | Head lower part |
1 x | Rotorshape Elevator |
1 x | Blade holder lower |
1 x | Grub screw M3x3 shouldered (2 pcs) |
1 x | Rotorhead pushrod |
2 x | Head runner |
2 x | Ball joint long |
1 x | 5.8G Receiver Helical Antenna with protecting case (SMA plug) 12 |
1 x | Raer wall |
2 x | Wheel keeper washer |
1 x | Rudder |
1 x | Anntena Panel 5,8 GHz - 14 dBi |
1 x | Head lower part New |
1 x | Rotor Mast |
3 x | Screws M1,6x6 Allen |
1 x | Nut M2 |
1 x | Baering 3x8x4 |
2 x | Head spacer |
2 x | Balls 4 mm |
2 x | Servo Fork |
1 x | Female connector for 20 pines AWG |
1 x | EWC6 40 cm wing connector |
1 x | F3A carbon 95 mm spinner |
1 x | Spinner 82mm Black ventilado |
1 x | 57 mm INO spinner (carbon imitation) |
1 x | Cono NUT 5/16"x 24 -M4 |
1 x | Screw M2.5x10 (10 pcs) |
1 x | MAX BEC 2D plus EX |
1 x | 15 cm PTFE-tubing for 25 mm tubes |
1 x | 30cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | 3-blades 20x10 carbon prop Super Silence |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | 3-blades 24x12 carbon prop Super Silence |
1 x | 3-blades 20x12 carbon prop Super Silence |
1 x | Pilatus PC-21 50E RED/WHITE (SebArt) |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | Sun Cover PC 21 XXL (JMB Jets) |
1 x | MAX BEC 2 |
1 x | Opto Gas Engine Kill Switch |
1 x | Spinner NUT M5 |
1 x | JETImodel SINGLE BEC |
1 x | SBEC 30 D |
1 x | Interruptor SPS 70v 60/120A |
1 x | Foam plastic plates (310x210x8 mm) |
1 x | JETImodel Addcap 1640 |
1 x | Spinner NUT M8x1,25 |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Switching module high voltage SXH |
1 x | PWC4 wing/fuselage connector for 4 servos |
1 x | Hexagonal Nut M4 (10 pcs) |
1 x | Spinner INO 51 mm Chrome (Imitacion metal) |
1 x | Screw M3x20 (10 pcs) |
1 x | Spring lock washer 4.1 mm (20 pcs) |
1 x | Spinner Alumin. fixed propeller 45 mm / 3,2 mm |
1 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | SPS 70V 140/280 A |
1 x | Spinner Alumin. fixed propeller 30 mm / 3,0 mm |
1 x | 3-blades 27x12 carbon prop Super Silence |
1 x | Blind nut M2 (10 pcs) |
1 x | 500 ccm gasoline fuel tank |
1 x | 10cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | 20cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | 29x12 prop Super Silence |
1 x | Blind nut M8 (10 pcs) |
1 x | 500 ccm complete gasoline fuel tank |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | 27x10 prop Super Silence |
1 x | 3-blades 21x12carbon prop Super Silence |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | SBEC Jeti |
1 x | 24x10 prop Super Silence |
1 x | 55% silver electrodes (2 pcs) |
1 x | 3-blades 30x12 carbon prop Super Silence |
1 x | Spinner Alumin. fixed propeller 40 mm / 3,0 mm |
1 x | |
1 x | 100g Flux Paste for Silver Solder |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | 30x14 prop Super Silence |
1 x | 50cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | 24x14 prop Super Silence |
1 x | 28x12 prop Super Silence |
1 x | 3-blades 29x12 carbon prop Super Silence |
1 x | 1000 ccm gasoline fuel tank |
1 x | 1000 ccm complete gasoline fuel tank |
1 x | 24x12 prop Super Silence |
1 x | 3-blades 16x10 carbon prop Super Silence |
1 x | 22x10 prop Super Silence |
1 x | 3-blades 28x12 carbon prop Super Silence |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Spinner Alumin. fixed propeller 45 mm / 4,0 mm |
1 x | DC-3 Douglas (White/Blue) 1800 mm |
1 x | Pilatus PC-21 50E, Electric L.G (SebArt) |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Blade holder upper |
1 x | Head upper part |
2 x | Blades 330mm |
1 x | Cierva C30 Elevator |
1 x | Head core bushing |
1 x | Cierva C30 spanish decoration Stickers |
|
10,811.19EUR |