1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | BALSA triangular 10x10x1000 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
2 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | BALSA triangular 8x8x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
2 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
2 x | Threaded coupler M2 (10 uds) |
2 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
2 x | Z type of cable coupler Ø 2 (2 uds) |
1 x | Kwik link AL M3 con Clip (2 pcs) |
2 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
2 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
2 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
2 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Ball link Aluminio M3 (2 pcs) |
2 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Angled clevis with threaded rod M3 |
2 x | Threaded coupler M3 (10 uds) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
2 x | Ball Link M2 with Ball and Hardware, 10 pcs |
2 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | Parachute PV6 for F3J |
1 x | Para-RC Trike "RC-Bullix" |
1 x | LUCAS pilot ARTF |
1 x | Paramotor BackPack XXS 2 |
1 x | Wing OXY 0,5 pulgadas2 |
1 x | Dust collector for mould cleaning |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Digital scale up to 40 kg |
1 x | Copier 2x20 cm pcs |
1 x | Ball Link Plier |
1 x | Starter Sullivan-STAR 601 |
2 x | Starter 12v (Max 180 and 30ccm) |
1 x | Screwdriver for Torx® TX8 |
1 x | Starter Sullivan-STAR 603 DINATRON |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
2 x | Copier 5x20 cm pcs |
2 x | Starter 12v (Max 90 and 15ccm) |
1 x | Motor A2212/13T |
3 x | DYNAMOMETER S-1580 |
1 x | Extension 30 cm (Futaba) |
1 x | Conector Servo female 4 pines |
1 x | Cabel "Y" 15 cm |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | CC 05 |
1 x | Straightened rod Ø 7.0 mm x 1000 mm |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Horn with ball 40x30 |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Cable coupler M2,5 (2 pcs) |
2 x | 4 mm M3 red control terminal (4 pcs) |
1 x | Threaded coupler M2,5 (10 pcs) |
2 x | Turnbuckle M2,5x27/43 (2pcs) |
2 x | Set clevis for pull-pull (TY13233 & TY13234) |
1 x | Pulley brass 16/2 (2 pcs) |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | Stainless steel 3 m Pull-Pull complet set (max 20 kg) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | Round Rod 1.0x3.5 cm |
1 x | Turnbuckle M2x29/43 (2pcs) |
1 x | BALSA triangular 6x6x1000 mm |
2 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Aero-Master (Aero-naut) |
1 x | DELPHIN Race 3.6m c64 |
3 x | Fournier RF-4D |
1 x | Z Bender - S Type Tool |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
2 x | Hot Glue Stick BLACK |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Cut tube |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | Cyanocrylate MD GA460 odourless 20g |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
1 x | Screwdriver for Hexagon 1,5mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Screwdriver for Torx® TX6 |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | Tirpiz Battleship 1:200 |
2 x | SCHARNHORST Battleship 1:200 |
1 x | Actuador lineal HLS12-100210-7.4v |
2 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | Astra wing Joinner (Top Model) |
1 x | FOX 3000 mm, Fuselage (FMS) |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Starter EM Gear Power 80 |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Screwdriver for Hexagon 1,27mm |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
1 x | Ion Pro NG electric with flaps GREEN Fluor (JP Model) |
2 x | Avia spare blue cockpit (Top Model) |
1 x | Aero-Master Fuselage (Aero-naut) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
2 x | FOX 3000 mm ARF (FMS) |
1 x | GPS Altis |
1 x | 5.8G Receiver Helical Antenna with protecting case (SMA plug) 12 |
1 x | ER-40eVo Set A [2x ER40 + RB-45] |
2 x | Electric Landing Gear ODYSSEY (Elektron Retracts) |
1 x | Manual Controller |
2 x | Electric Landing Gear RS-200 w/o programmer ULTIMATUM 2.0 (Elekt |
2 x | Propeller POWER-PROP 7x7 |
1 x | Electric Landing Gear PC-21 Skymaster (Elektron Retracts) |
3 x | ER-50eVo Set A [2x ER50 + RB-45] |
1 x | Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re |
2 x | Electric Landing Gear ODYSSEY +GS200 (Elektron Retracts) |
2 x | Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox |
2 x | ER-40eVo Set B [Complet Set + GS200] |
2 x | Turnbuckle M2x22/35 (2pcs) |
1 x | Wire easy tensioner (red) |
1 x | Threaded coupler M2 (10 pcs) |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | Pulley brass 6/1,5 (2 pcs) |
1 x | Propeller 3x2 |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | 4 LiPo XH>EH adapter |
1 x | PROXXON - TRIANGLE / DELTA SANDING MACHINE OZI/E |
1 x | Silicone red 0,25 mm² wire (25 m) |
1 x | Tube bender |
1 x | IMPULSE 2 F3F |
2 x | PPM Encoder Module |
2 x | Tube Pitot to PIXHAWK |
2 x | PIX Hawk with accesories |
1 x | Aero-Master Wings (Aero-naut) |
1 x | Buy Perforated film 145 cm / 50 m |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
1 x | Z type of cable coupler Ø 1 (2 uds) |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | Couple M4 for wire (10 pcs) |
1 x | Goma arrancador Ø36 mm x 30 mm |
2 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m |
1 x | Heli blades angle measurer |
1 x | White silicone 0,25 qmm wire (150 m) |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | La Capitania di Venetia 1:50 |
1 x | Propeller 11x4,7 SlowFlyer |
1 x | Set montaje amortiguador para modelos 8-16 Kg |
1 x | Precision wrench L100 mm |
1 x | Schul-Malpinsel Gr.5 |
1 x | Universal Colour Paste deep black 50 g |
2 x | Buy Perforated film 100 cm / 20 m |
1 x | Challenger ARF (Top Model) |
1 x | Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g |
1 x | Albatros ,spare fuselage (Top Model) |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | Peel ply 95 g/m² (plain weave) 100 mm x 100 m |
1 x | Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav |
1 x | 5 LiPo XH>EH adapter |
1 x | Buy Perforated film 100 cm / 10 m |
1 x | Glass fibre sleeve Ø 20 mm |
1 x | ENIGMA ARF |
2 x | Rocket D3-P |
2 x | Motor A50-12 L V4 |
2 x | A40 Backmountset complete |
2 x | Motor A10-7 L 4,4:1 |
1 x | Motor A60-6XS V4 28-pole kv370 |
2 x | Motor A30-10 XL V4 |
1 x | Motor A50-14L Turnado V3 Glider |
1 x | A40-10S V2 8-Pole + 6,7:1 PG |
1 x | A50 Backmountset complete V3/V4 |
1 x | Motor A50-10L Turnado V3 Glider |
1 x | Motor A60-5XS V4 28-pole kv420 |
1 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
1 x | Motor A30-12 XL Glider |
1 x | Motor A50-14 L 8-Polos Electric turbine |
1 x | Rocket cardboard tube 50mm x 48mm x 250mm |
1 x | Axle for motor A20-S (3 uds) |
1 x | Motor A20-20 L EVO |
1 x | Digital weight, angle and balance meter BASIC |
1 x | Electric Landing Gear ULTIMATUM 2.0 (Elektron Retracts) |
1 x | Electric Landing Gear "Black Edition" BULL Mo1 2.6 GS200 (Electr |
1 x | Wheel 75 mm with electromagnet and brake disk (2 uds) |
1 x | A60-6XS V4 28-Pole |
1 x | Motor A30-14 L V4 |
1 x | Motor A40-14 L 14-Pole V4 |
1 x | Motor A50-16 S V4 |
1 x | Motor A60-7XS V4 28-pole kv330 |
1 x | Bearings for motors hacker A50 |
1 x | Rocket D9-7 |
1 x | Motor B20-10 L + 4:1 gearbox |
1 x | A50 Backmountset complete |
1 x | Motor A20-20 L EVO |
1 x | Motor A200-8 |
1 x | Motor A20-26 M EVO |
1 x | A50 Backmountset complete |
1 x | Motor A40-10 L V2 14-Pole Glider |
1 x | Motor A30-14 M V2 6 Poles |
1 x | Motor A200-6 |
1 x | Motor A20-6 XL 10-Pole EVO + 4,4:1 |
1 x | Brake disc Electron Retracts |
1 x | 10-15mm Servo Arm |
1 x | Electric Landing Gear GS-200 BULL Mo1 2.6 (Elektron Retracts) |
|
38,376.88EUR |