1 x | Allen wheel collar M4x6 |
1 x | 100 mm rods + T patellas set for direction control |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | 140 mm rods + T patellas set for direction control |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
2 x | Allen wheel collar M4x4 |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
2 x | 28x5 mm wires output (2 pcs) |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | 250 mm / 16 mm Airbrakes |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | 45 mm rods set for direction control |
2 x | Clip mini fixing for wing (2 pcs) |
1 x | 100 mm rods set for direction control |
1 x | 41x5,5 mm wires output (2 pcs) |
2 x | 90 mm rods + T patellas set for direction control |
1 x | 140 mm rods set for direction control |
1 x | 11 mm Rubber pads (14 pcs) |
3 x | Cable grommet 9.5 mm (4 uds) |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | Allen wheel collar M3x3 |
1 x | Allen wheel collar M3x5 |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
2 x | Cockpit aluminium closing |
1 x | Adapter lead MPX/XT60 |
1 x | 2 LiPo XH>EH adapter |
1 x | MPX-Dean "T" Adapter |
1 x | Adapter lead MPX/EC3 |
1 x | 3 LiPo XH>EH adapter |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
2 x | CM-3 |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | 4 LiPo XH>EH adapter |
1 x | CC 01 |
1 x | 5 LiPo XH>EH adapter |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
2 x | 30 cm BEC cable (male) |
2 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | 30 cm BEC cable (female) |
1 x | TrainerCord (master-learner) |
2 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | USB HLS prog. interface |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | Dean "T" - Futaba Adapter |
1 x | Landing gear frontal support 29x26x13,5 |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Crimping tool |
1 x | Snap long M2 (10 uds) |
1 x | Screwdriver for Torx® TX8 |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Screwdriver for Hexagon 1,5mm |
1 x | |
2 x | Split pin 1.6x16 mm (10 uds) |
1 x | Hexagonal ball head 2.0 x 50 mm |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
2 x | Hot Glue Stick RED |
4 x | Z Bender - S Type Tool |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Screwdriver for Torx® TX6 |
3 x | Vacuum pump 12 CFM |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
2 x | Starter 12v (Max 180 and 30ccm) |
2 x | Dust collector for mould cleaning |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Landing gear frontal support 25x32x16 |
1 x | Cockpit plastic closing |
1 x | Snap short M2 (10 uds) |
2 x | Hot Glue Stick BLACK |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
1 x | Copier 2x20 cm pcs |
3 x | Vacuum pump P1-N |
1 x | Starter Sullivan-STAR 601 |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
1 x | Silicone 0,50 qmm servos wire Graupner(5 m) |
1 x | 1 m servo "Premium" wire (white/red/blue) |
1 x | White silicone 0,25 qmm wire (100 m) |
1 x | PVC 0,25 qmm servos wire Graupner (5 m) |
1 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
1 x | Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC |
2 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
1 x | Green smoke canister 100 g |
1 x | Smoke set "Glider" |
1 x | Ventral support for AX-18/AX-60 |
1 x | Red smoke canister 65 g |
1 x | Initior Receiver FRX2 Wireless |
1 x | White smoke bombs AX-60 (5 pcs) |
2 x | White smoke bombs AX-3 (10 pcs) |
1 x | "S" set for planes |
1 x | PCARD Wireless System |
2 x | Initior Transmitter FTX2 Wireless |
3 x | Yellow smoke canister 100 g |
2 x | Red smoke canister 100 g |
2 x | Yellow smoke canister 65 g |
2 x | Smoke set "S" |
1 x | Parachute expulsion foam |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | Remote electric ignition system |
1 x | White smoke bombs AX-18 (5 pcs) |
2 x | Green smoke canister 140 g |
2 x | AX-60 starters (5 pcs) |
2 x | Green smoke canister 65 g |
2 x | B4-0 rocket charges (6 pcs) |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Optical RPM Sensor |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | SIMtransmitter 6 Mode 2 |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Glases Flitemaster |
1 x | Cinta Goldfix 1m |
2 x | wing/fuselage connector for 16 pines AWG 20-24 |
1 x | PWC4 wing/fuselage connector for 4 servos |
1 x | Canopy Latch |
2 x | SPS Remote switch actuator |
1 x | SBEC Jeti |
1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | Opto Gas Engine Kill Switch |
1 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | Multi-adapter balancer JST - TP |
1 x | MAX BEC |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | CC 05 |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
2 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
2 x | Switching module high voltage SXH |
1 x | Male Prolonger TP 4/5S |
1 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Tube bender |
1 x | silverlot 45% - 1,50x500 mm solder rods (2 pcs) |
2 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | Universal Filter |
3 x | Z Bender - S Type Tool |
1 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
3 x | Welder 100W/200V |
1 x | Carbon plate 350x150x1.0 mm |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Electric spoiler 250 mm (2 pcs) |
2 x | EC-Cutter |
1 x | Silicone black 0,5 qmm wire ( 1 m) |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | Fiberglass heat shield Ø 6 mm 1000 mm |
1 x | One touch canopy lock |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Propeller diller for DLE170 |
1 x | 10 mm Quick clamp_L (6 pcs) |
2 x | Mini Infrared Thermomiter |
1 x | JetiBOX |
1 x | Jeti Box mini |
1 x | Vest clothes Hispano Aviación |
1 x | PROFI Box JETI |
2 x | White smoke bombs AX-9 (10 pcs) |
1 x | Blue smoke canister 100 g |
1 x | AX-60 starters (5 pcs) |
1 x | Smoke set "M" |
1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
1 x | Spinner fixed propeller 42 mm / 5,0 mm |
1 x | Adaptadores carga 6s JST-XH |
1 x | Heli digital angle measurer |
1 x | DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301) |
1 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr |
1 x | T-Motor U7-V2.0 Kv420 |
1 x | AXI 2204 Multicopter |
1 x | Motor 2212 (1000KV) Quadcopter F450 |
1 x | UBEC 6A KAVAN |
1 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
2 x | EXTRA 330 LX 2.34m ARF (LX-09) Pilot |
1 x | Sukhoi 29S 2,6 m Yellow/Black (SebART) |
1 x | Combustible Glow "KAVAN" air/heli 10% nitro |
1 x | Fresa corte diamante Ø 2.35mm (lentil) |
1 x | Dummy motor GPW Wasp Scale 1/4 |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Goma arrancador Ø36 mm x 30 mm |
1 x | Conector MT-60 (pair) |
1 x | Dremel 3000 130W |
1 x | Laminating brush 10 mm, pack/ 50 pcs |
1 x | Heat Seal Iron |
1 x | Conector MR-60 (pareja) |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Ciano KAVAN Thin 20g |
1 x | KIRA 480-31 5,2:1 |
1 x | AXI 2826/6 V2 |
1 x | KIRA 600-38 6,7:1 |
1 x | KIRA 480-26 5,2:1 |
1 x | 50 mm aluminium spinner (Kavan) |
1 x | Ventus 1:4 set of instruments |
1 x | KIRA 480-34 |
1 x | AXI 2217/20 V2 Long "F5J" |
1 x | AXI 2814/12 V2 Long |
1 x | KIRA 480-43 |
1 x | AXI 2826/8 V2 Long |
1 x | DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV) |
1 x | AXI 2217/20 V2 |
1 x | AXI 2808/16 V2 Long |
1 x | AXI 2826/6 V2 Long |
1 x | Tool for entel |
1 x | AXI 2814/12 V2 |
1 x | PYRO 600-12 |
2 x | AXI 2826/12 V2 |
1 x | PYRO 600-11 |
1 x | AXI 2826/8 V2 |
1 x | KIRA 400-39 5,2:1 |
1 x | PYRO 650-53L EJE LARGO |
1 x | KIRA 500-30 6,7:1 |
1 x | KIRA 480-38 5,2:1 |
1 x | Connectors banna oro 2 mm (M/F) |
2 x | Smart Soldering Iron 110W/230V AC |
1 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Kontronik ProgUnit |
1 x | Jeti Advance Pro Program Card |
1 x | Starter EM Gear Power 250 |
2 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
1 x | Support Filtro FESTO |
2 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | AXI 2814/10 V2 |
1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
1 x | Jeti Advance Plus Program Card |
1 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | Me-163 |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Universal Prop Saver |
1 x | AXI Cooler 22xx |
1 x | SLICK 360-B 104" (2640 mm) |
1 x | DPS Switch JR/JR |
1 x | USB Interface REVOLECTRIX for CellPRO 10s |
1 x | ARS 300 91" ARF 2311mm ORANGE |
1 x | Sebart 2.2 m WHITE/BLUE (SebART) |
1 x | Axle for AXI 2814/xx motors |
1 x | Axle for AXI 2208/xx motors |
1 x | AXI 2820/12 CYCLONE |
1 x | AXI 2820/10 V2 |
1 x | Axle for AXI 5330/xx motors |
1 x | AXI 2820/8 V2 Long |
1 x | AXI 2814/20 V2 Long |
1 x | Yellow smoke canister 140 g |
1 x | Sealing Iron Profi LCD |
1 x | Sub-D Plug Mold |
1 x | VITAPROP CARBON FOLDING PROP 15x9.5" |
1 x | AXI 2826/12 V2 Long |
1 x | Axle for AXI 2820/xx motors |
1 x | MOTOR MOUNT RODS AXI 53XX AND AXI 81XX 60MM (4PCS) |
1 x | Prop Saver for AXI 22xx/xx |
1 x | EVP Unit for AXI2208/xx and 2212/xx |
1 x | EDGE 540-A 91" (2310 mm) |
1 x | Propeller diller for EME35 and DLE35 |
1 x | Male connector for 20 pines AWG |
1 x | Schul-Malpinsel Gr.5 |
1 x | Sebart 2.2 m YELLOW/BLACK (SebART) |
1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
1 x | Micro Switch button |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | Propeller diller for DLE111 and DA85-150 |
1 x | Digital weight, angle and balance meter BASIC |
1 x | wing/fuselage connector for 12 pines AWG 20-24 |
1 x | EXTRA NG 74" white/red/blue (Skywing RC) |
1 x | Connector Sub-D 2+5 Male |
1 x | EWC3 100 cm wing connector |
1 x | Tool for entel |
1 x | Sukhoi 29S 2,6 m,CF landing gear(SebART) |
1 x | Steel brush wheel with 2.35mm |
1 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
1 x | SPARK Switch 7.4v |
1 x | SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm |
1 x | AXI 2820/8 V2 |
1 x | Frontal Adapter for AXI53xx |
1 x | Axle for AXI 2808/xx motors |
1 x | AXI 2826/10 V2 |
1 x | Prop Holder AXI 41xx V2 |
1 x | AXI 2820/12 V2 |
1 x | AXI 2808/24 V2 Long |
1 x | VM 2020/20 rear |
1 x | Axle for AXI 4130 V2 motors |
1 x | 8 mm Adapter for AXI53xx |
1 x | Axle for AXI 2212/xx motors |
1 x | Blades 330mm |
|
28,518.36EUR |