1 x | Blades 330mm |
1 x | Towing hook <3m |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Initior Receiver FRX2 Wireless |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | Crimping tool |
1 x | Medium pin type hinge (12 uds) |
1 x | Copier 2x20 cm pcs |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Circlick securite |
1 x | Crimping tool |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
1 x | Allen wheel collar M3x5 |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Cable coupler M3 (10 uds) |
1 x | Digital scale up to 40 kg |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | A/C economy plywood 600x300x6+.0 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Allen wheel collar M4x4 |
1 x | Towing hook |
1 x | 140 mm rods set for direction control |
1 x | Connectors banna oro 3,5 mm (M/F) |
1 x | Glases Ace |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Simulador RealFlight RF-9.5 S (sin emisora) |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | Boxed KIT OF 7 Rotary Burrs FINE |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | "S" set for boats |
1 x | DPSI Ampere battery backer |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Connector Sub-D 2+5 Female |
1 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | White smoke bombs AX-3 (10 pcs) |
1 x | Buy Perforated film 100 cm / 50 m |
1 x | Indoor hinge with servo arm integraded |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Conector male bateria 1s Kavan/Walkera 10cm cable |
1 x | 15 mm reinforced hinge |
1 x | CC 03 |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | Clip mini fixing for wing (2 pcs) |
2 x | Aluminum Bayonet / strongal D35 mm / 1 m |
1 x | A/C quality beech plywood 600x300x5.0 mm |
2 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | Adjustable launching hook |
1 x | Red smoke bombs AX-60 (5 pcs) |
1 x | Long pinned hinge (12 uds) |
1 x | 45 mm rods + T patellas set for direction control |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Allen wheel collar M4x6 |
1 x | 18 mm reinforced hinge |
1 x | Interface Jack Adapter IKARUS |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
2 x | Ball Link Plier |
2 x | 140 mm rods + T patellas set for direction control |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Allen wheel collar M3x3 |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Balsa panel 4.0x100x1000 mm |
2 x | EasyFLY Addon |
1 x | Smoke set "Glider" |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Dremel PERMAGRIT 18 mm round lime |
1 x | BALSA triangular 8x8x1000 mm |
1 x | Dust collector for mould cleaning |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
1 x | Smoke set "S" |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Pin hinge 34x16 mm (10 uds) |
1 x | Connector CAN 15 |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | Glases Nimbus "Black" |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | Glases Nimbus |
1 x | Banna gold connector 2,5 mm (M/F) |
1 x | Parachute expulsion foam |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Connectors banna gold 5,5 mm (M/F) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | 25 mm Sandpaper file |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | Angled clevis with threaded rod M3 |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | White smoke canister 100 g |
1 x | Digital weight, angle and balance meter BASIC |
1 x | 250 mm / 16 mm Airbrakes |
1 x | Balsa panel 5.0x100x1000 mm |
2 x | Dean-T Plug Mold |
1 x | Actuador lineal HLS12-100210-7.4v |
1 x | "S" set for planes |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | TS832 to Gopro AV/Power Cable |
1 x | Rubber bushing with bracket "A" type (2 pcs) |
1 x | Red smoke canister 140 g |
1 x | PowerBox MagSensor black connector SRS/Champion |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | PIN Connector female (100 pcs) |
1 x | Glass fabric 25 g (2 m²) |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Glases Aspen |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Fiberglass plate 350x150x0.3 mm |
1 x | Servo slow down unit (0,7-14,7 sec ) |
1 x | Multi-adapter balancer JST/C - TP |
1 x | Propeller 9x4,7 SlowFlyer |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
2 x | Batetia LiFe 3200 mAh 6.6v MPX PowerBox |
1 x | Mold plugs XT-30 |
1 x | Propeller drill jig DA-35/50/60/70 |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | Xoar Electric Beechwood Prop 20x10 |
1 x | Lead with adhesive (2 pcs) |
1 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL |
1 x | Screw M3x16 (10 pcs) |
1 x | CNC FPV Display screen&Transmitter Holder Vertical |
1 x | Mixing tube for double syringes and cartridges (MR 1:1 and 2:1) |
1 x | PT 16x10 E Propeller |
1 x | CA Glue fast 20g |
1 x | GameCommander USB Universal |
1 x | Blue smoke canister 140 g |
1 x | Red smoke canister 65 g |
1 x | Charger SKY RC e680 |
1 x | Set luces Airliner 2.1m Wingspan Scale 1:14 Civil/Sport |
1 x | Panel Honeycom carbon 350x150x3.5mm |
1 x | PVC grid straight 290x185x0.32 mm |
1 x | Ciano KAVAN Thick 20g |
1 x | 45x19 mm hard foam KOVO wheel (2 pcs) |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Pulley brass 14/2 (2 pcs) |
1 x | 20 mm tail wheel for 0,5-1 Kg models |
1 x | 8Wx2 Navigation & Strobe, 11mm, T-Fuse Red/White |
1 x | 76x23 Ø3.5 mm aluminium core wheel |
1 x | DUBRO - BOLTON PRESSURE FITTING 6-32 (1 PC) |
1 x | Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm |
1 x | Glass fibre braided sleeve (45mm) roll 10m |
1 x | 16mm Gear-Spotlight, 4W |
1 x | MR30 connector female |
1 x | NF-3X-350 set |
1 x | Jet Afterburner Simulator NF-Jet3 YSW |
1 x | Pulley brass 16/2 (2 pcs) |
1 x | PIX Hawk with accesories |
1 x | 90x45 mm hard foam KOVO wheel |
1 x | Ball Bearing Oil 25 ml |
1 x | Yellow smoke canister 65 g |
1 x | Peel ply 100 g/m² (plain weave) 50 cm x 2m |
1 x | EC-Cutter |
1 x | Green smoke canister 100 g |
1 x | Foam plastic plates (310x210x5 mm) |
1 x | Protector Connector MPX (1 pair) |
1 x | PowerBox iGyro 3xtra |
1 x | Clip fixing for wing (2 pcs) |
1 x | XT60 Connector with Holder Male 2pcs |
1 x | XH male balance (7S) connector (2 pcs) |
1 x | UHU Por 50ml/40g |
1 x | Heat-conducting adhesive (2x2ml), WLK DK 4 |
1 x | Landing gear axle Ø 6 mm (2 uds) |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | wing/fuselage connector for 12 pines AWG 20-24 |
1 x | Flap hinge (6 pcs) |
1 x | Decorative caps, multicoloured, short |
1 x | SPARK Switch 7.4v |
1 x | Battery LiFe TopFuel 3100 mAh 3s MTAG 30C |
1 x | XH male balance (9S) connector (2 pcs) |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
1 x | XT-60 connector (male) |
1 x | Precision wrench L100 mm |
1 x | XH female balance (9S) connector (2 pcs) |
1 x | wing/fuselage connector for 16 pines AWG 20-24 |
1 x | Xoar Electric Beechwood Prop 22x10 |
1 x | 3,0x60 mm allen screwdriver |
1 x | Electric Fuel Pump 12v |
1 x | USB Mini Camera endoscope |
1 x | 32x9 mm foam standar KOVO wheel (2 pcs) |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | USB HLS prog. interface |
2 x | TX 250 mW especial GOPRO |
1 x | PT 22x10 EL Propeller |
1 x | PT 21x13 EL Propeller 3 Blade |
1 x | Hardener Aero EPH 161 (500 g) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Foaming agent for epoxy resins 200 g |
1 x | FUSELAGE STAND MINI AVANTI EDF/JET |
|
8,297.95EUR |