| 2 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
| 1 x | White gelcoat 1 Kg |
| 1 x | resin-hardener package L-385 with hardener H-385 (3.5 Kg) |
| 2 x | resin-hardener package L-385 with hardener H-385 (875 g) |
| 2 x | Hardener P-25, canister 2.5Kg |
| 1 x | resin-hardener L-385 H-385 (5000 g) |
| 1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg |
| 1 x | Epoxy Resin L 285 + Hardener 386, kit/ 675g |
| 2 x | resin-hardener L-385 H-385 (1250 g) |
| 1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
| 1 x | Epoxy Resin L + Hardener CL (60 min) kit/ 930 g |
| 2 x | Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g |
| 1 x | resin-hardener L-385 H-385 (625 g) |
| 1 x | Epoxy Resin L (2.5 Kg) |
| 2 x | Hardener Aero EPH 161 (250 g) |
| 2 x | resin-hardener package L-385 with hardener H-385 |
| 1 x | Optical RPM Sensor |
| 1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
| 1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
| 2 x | Thixotropic agent tin/ 15 g (approx. 350ml) |
| 2 x | Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l) |
| 2 x | Cotton Flocks, bag/ 500 g |
| 2 x | Thixotropic agent TM 100, tin/ 415 g (approx. 5 l) |
| 1 x | Thixotropic agent TM 100, tin/ 75 g (approx. 1 l) |
| 1 x | Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l) |
| 1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | White silicone 0,25 mm² wire (25 m) |
| 1 x | ABS Strip 1.0x3.0x1000 mm |
| 1 x | Mixing tube for double syringes and cartridges (MR 1:1 and 2:1) |
| 1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
| 1 x | Parachute P4 |
| 1 x | Conector MT-60 (pair) |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | MEKP Harderner 100 g |
| 1 x | Glow Plug Clip 1.3 Ah |
| 1 x | GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l) |
| 1 x | Glass Bubbles (0,12 g) 350 ml |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | Circlick securite |
| 1 x | CC 05 |
| 1 x | Metal gear set for HS85MG/5085MG |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | Carbon plate 350x150x1.0 mm |
| 1 x | Cotton Flocks, bag/ 7 Kg |
| 1 x | Connector Sub-D 2+5 Female |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | Connector CAN 15 |
| 1 x | Connector Sub-D 2+5 Male |
| 1 x | Double conector with JR adapter and 200 mm extension |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | Bidule 111 3000 mm Canopy |
| 1 x | Avia spare fouselage CF reinforced (Top Model) |
| 1 x | 90x60 mm standart servo cover |
| 1 x | Avia (Top Model) |
| 1 x | 7 mm gas motor standoff |
| 1 x | Angle measurer |
| 1 x | Albatros ,spare cockpit (Top Model) |
| 1 x | 34 mm Alu spinner 3.17 mm pleg. propeller |
| 1 x | 38 mm Alu spinner 5 mm pleg. propeller |
| 1 x | Albatros red/white (Top Model) |
| 1 x | Propeller APC 11x10 Electric |
| 1 x | 16x10 tree blades propeller Master Airscrew |
| 1 x | Propeller APC 11x3.8 SF |
| 1 x | Propeller APC 10x4.7 |
| 1 x | Propeller APC 13x6.5 Electric |
| 1 x | Propeller electric carbon 10x8 |
| 1 x | Propeller electric carbon 9.5x6 |
| 1 x | Propeller POWER-PROP 10x7 Izda |
| 1 x | Propeller APC 11x7 SF |
| 1 x | Propeller electric carbon 10x6 |
| 1 x | Propeller APC 13x8 Electric |
| 1 x | Propeller APC 14x12 Electric |
| 1 x | Propeller APC 10x10 Electric |
| 1 x | Porpeller HUNTER 400 |
| 1 x | 8x6 tree blades propeller |
| 1 x | 15x7 tree blades propeller LEFT |
| 1 x | Propeller POWER-PROP 12x8 |
| 1 x | Propeller POWER-PROP 10x7 |
| 1 x | Propeller electric carbon 8.5x6 |
| 1 x | Propeller APC 10x5 Electric Pusher |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | Prolonguer for Balancer Thunder Power 6S |
| 1 x | Opto Gas Engine Kill Switch |
 |
| 3,587.55EUR |
