| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 2 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
| 1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
| 1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
| 1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
| 1 x | Vacuum bag, 1200 mm x 50 m |
| 2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
| 1 x | BALSA triangular 10x10x1000 mm |
| 1 x | Pine wood slat 3.0x5.0x1000 mm |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 2 x | BALSA trip 10x10x1000 mm |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 2 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | BALSA triangular 6x6x1000 mm |
| 2 x | Liston HAYA 3 x 10 x 1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | Pine wood slat 5.0x5.0x1000 mm |
| 4 x | BALSA trip 3.0x3.0x1000 mm |
| 2 x | Beech dowels 2.0 x 1000 mm |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 2 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | Carbon fiber rod 5.0 mmx1000 mm |
| 1 x | Pilot "Duke" Legends Series (Slimline) |
| 1 x | XH female balance (4S) connector (2 pcs) |
| 1 x | Xplorer1 anemometro |
| 1 x | PARTALL® Hi-Temp Wax, 340 g |
| 1 x | 140 mm rods set for direction control |
| 1 x | Pin hinge 26x11 mm (10 uds) |
| 1 x | Straightened rod Ø 2.5 mm x 1000 mm |
| 1 x | Support Pitot JETI |
| 1 x | Fiberglass plate 620x540x3,2 mm |
| 1 x | Support Filtro FESTO |
| 2 x | Chopped glass fibre strands 3 mm |
| 1 x | Glass fabric 25 g (2 m²) |
| 1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
| 1 x | Head runner |
| 1 x | Nut M1,6 |
| 1 x | Steering lever |
| 1 x | Blade holder center GFK 0,5 mm |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
| 2 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
| 2 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Horn 16,5x20 mm (2 pcs) |
| 1 x | Cable with accesories |
| 1 x | Horn with ball 55x40 |
| 1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
| 1 x | Small aluminium horn red (2pcs) |
| 1 x | Horn mando small (2 pcs) |
| 1 x | Horn mando long (2 pcs) |
| 1 x | Truck-trailer for gliders 720 x 285 mm |
| 1 x | Angle measurer |
| 1 x | Tester LiPo/LiIon/LiMn/LiFe |
| 1 x | 15 mm reinforced hinge |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | Birch plywood plate 600x300x1.2 mm |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | Flap hinge 33x9 mm (6 pcs) |
| 1 x | Foam plastic plates (310x210x5 mm) |
| 1 x | 28 mm tailwheel unit |
| 1 x | Fiberglass plate 620x540x1,0 mm |
| 1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
| 1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
| 2 x | Film release agent PVA 25 ml |
| 1 x | Fiberglass plate 350x150x0.3 mm |
| 1 x | Flap hinge (6 pcs) |
| 1 x | Brass rod Ø 1.5 mm x 1000 mm |
| 1 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
| 1 x | Brass rod Ø 1.0 mm x 1000 mm |
| 1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
| 1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
| 1 x | Fiberglass plate 620x540x2,0 mm |
| 1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
| 1 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
| 2 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
| 1 x | Fiberglass plate 350x150x4.0 mm |
| 1 x | Fiberglass plate 620x540x0,3 mm |
| 1 x | Release film 100 cm x 50 m |
| 1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
| 1 x | Fiberglass plate 620x540x0,2 mm |
| 1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
| 1 x | Teflon rollers 40 mm x 15 mm Diam. |
| 1 x | Foam plastic plates (310x210x3 mm) |
| 1 x | Sheet Depron Aero 1250x800x3 mm |
| 1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
| 1 x | Aluminium sheet 500x250x0,5mm |
| 1 x | Long pinned hinge (12 uds) |
| 1 x | Styrene plate 320x120x0.5 mm |
| 1 x | Carbon plate 350x150x1.5 mm |
| 1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
| 1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Brass control horn M3 short for wire (2 pcs) |
| 1 x | Extra long horn 60x30 |
| 1 x | Long horn 50x26 |
 |
| 5,417.79EUR |
