1 x | Banna gold connector 2,5 mm (M/F) |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | 2 mm male connector (2 pcs) with safety connector |
1 x | Connectors banna oro 3 mm (M/F) |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
1 x | XH female balance (3S) connector (2 pcs) |
1 x | Connectors banna oro 8,0 mm (M/F) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
2 x | One touch canopy lock |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
2 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | SUS wire 3m (nylon coated) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
2 x | Covered closure or fairings |
4 x | Locking cable tie 2.5x100 (uds) |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Locking cable tie 3.2x142 (uds) |
2 x | Canopy Latch |
1 x | Gates hinge |
1 x | Gates hinge aluminium (1 pcs) |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
2 x | Long pinned hinge (6 uds) |
1 x | Small pinned hinge (12 uds) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Flap hinge (6 pcs) |
1 x | Long pinned hinge (12 uds) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Micro flex hinge (12 uds) |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC |
1 x | Strip 2,0x2,0x330 mm |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Parachutist |
2 x | Motor OS 3820-1200 electric |
1 x | Servo Arm aluminium ALU-STAR |
1 x | Stickers-digit for marking |
1 x | Snap long M2 (10 uds) |
1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
2 x | Landing gear frontal support 25x32x16 |
1 x | Allen wheel collar M4x4 |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | Allen wheel collar M3x3 |
1 x | Pushrod octagone 3/2 with coupler M2 |
1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
2 x | Dean "T" - Futaba Adapter |
1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | 4 LiPo XH>EH adapter |
1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
1 x | Lead with adhesive (2 pcs) |
1 x | Snap for floding prop for 2 mm axi |
2 x | Split pin 1.6x16 mm (10 uds) |
1 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
2 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Snap pin for micro clevis (10 uds) |
1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
1 x | Split pin 1x8 mm (10 uds) |
2 x | Wing bolts M3 Steel screw blue (2 pcs) |
1 x | 45 mm rods set for direction control |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | Carbon fiber rod 0.8 mmx1000 mm |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
2 x | P 17×5.8 Prop-2PCS/PAIR |
2 x | Combo AM480 T-Motor 650 Kv |
1 x | T-Motor U7-V2.0 Kv420 |
3 x | Motor OS 3805-1200 electric |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | Landing gear frontal support 29x26x13,5 |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | PH5 adapter for 5mm M8 axi for AXI2820 y 2826 |
1 x | Prop Saver for AXI 22xx/xx |
1 x | SPARK Switch 12v |
1 x | SPARK Switch 7.4v |
1 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Cable grommet Ø 5 mm (4 uds) |
2 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Hitec 20 mm servo arm |
1 x | 54 mm Futaba servo arm tandem with ball link |
1 x | Brazo Servo XTorque 52 mm HITEC 25T-6 |
1 x | Futaba 30 mm servo rounded arm |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
1 x | Cable coupler M2x66 (2 uds) |
1 x | Futaba 52 mm servo arm |
1 x | Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor |
1 x | Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm |
1 x | Support ECU Xicoy X-45 |
1 x | 90 mm rods + T patellas set for direction control |
2 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | 250 mm / 16 mm Airbrakes |
1 x | 140 mm rods + T patellas set for direction control |
1 x | Pushrod octagone 4/3 with coupler M3 |
1 x | AXI Cooler 41xx |
1 x | Motor holder AXI |
1 x | Male connector for 10 pines AWG |
2 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | Connector CAN 15 |
1 x | EWC3 40 cm wing connector |
1 x | USB Interface REVOLECTRIX for CellPRO 10s |
1 x | Female connector for 16 pines AWG |
1 x | Female connector for 12 pines AWG |
1 x | EWC3 100 cm wing connector |
1 x | Connector Sub-D 2+5 Female |
1 x | SPARK Switch 5.9v |
1 x | wing/fuselage connector for 12 pines AWG 20-24 |
1 x | Male connector for 16 pines AWG |
1 x | Hacker X-Pro USB interface V2 |
1 x | Female connector for 20 pines AWG |
1 x | Cabling for Fox MDM1 wings |
1 x | JETImodel Addcap 1640 |
1 x | Connector Sub-D 2+5 Male |
1 x | Male connector for 20 pines AWG |
1 x | DPSI Ampere battery backer |
1 x | Male connector for 6 pines AWG |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | Male connector JST SH 1.0mm with 10 cm wire |
1 x | wing/fuselage connector for 16 pines AWG 20-24 |
1 x | wing/fuselage connector for 3 pines AWG 20-24 |
1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
1 x | Micro Switch button |
1 x | Female connector for 6 pines AWG |
1 x | Male connector for 12 pines AWG |
1 x | Three-position switched channel, short |
1 x | DPS Switch JR/JR |
1 x | Short Switch On/Off micro |
2 x | EWC6 40 cm wing connector |
1 x | Fuel Dot (Silver) |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | Wing bolts M6 Steel screw Red (2 pcs) |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | DPSI Micro-DualBat 5.9V / 7.2V MPX-JR |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | 28x5 mm wires output (2 pcs) |
1 x | DPSI magnetic switch actuator (housing) |
1 x | Cockpit metalic closing |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Futaba 25 mm servo arm with M3 ball link |
1 x | Ball link M2 (10 pcs) |
1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
1 x | Futaba 38 mm servo arm with ball link |
1 x | Ball link M2,5 (10 pcs) |
1 x | FUTABA 20 mm servo arm with ball link |
1 x | HITEC 20 mm servo arm with ball link |
1 x | Ball link M3 (10 pcs, flat ball) |
2 x | Extension for SensorSwitch 30cm |
2 x | Conector JR Servo female (10 pcs) |
2 x | 10m servo "Premium" wire (white/red/blue) |
2 x | 30 cm MULTIPLEX female connector |
2 x | Vess propeller 13x6 S |
2 x | Adapter lead MPX/EC3 |
2 x | 100m servo "Premium" wire (white/red/blue) |
1 x | Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC |
1 x | Conector JR Servo male (10 pcs) |
1 x | Charging Extension 50cm for 2 Battery |
1 x | Cable set Premium™ MAXI "one4two" |
1 x | Helice FOXY 22x10 2-Bl |
1 x | Extension for SensorSwitch 60cm |
1 x | Propeller VESS 32A |
1 x | Extension MPX-MPX 20 cm |
1 x | SAVOX SH 0254 servo |
1 x | Batetia LiFe 3200 mAh 6.6v MPX PowerBox |
1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
1 x | 12V Car Adapter |
1 x | Race 650 Johnson motor 7.2v |
1 x | 50m servo "Premium" wire (white/red/blue) |
1 x | 30 cm DEANS female connector |
1 x | Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC |
1 x | Charger 220/110v |
1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
1 x | BlueCom™ Adapter (iOS) |
1 x | Extension for LC-Display 50cm |
1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
1 x | 1 m servo "Premium" wire (white/red/blue) |
1 x | Propeller VESS 27A |
1 x | PowerBox Smokepump JETs 2x outside |
1 x | 200m servo "Premium" wire (white/red/blue) |
1 x | Propeller FOXY 34x12 2-Bl |
1 x | Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC |
1 x | Crimping tool |
1 x | PowerBox Smokepump |
1 x | Propeller KAVAN 32x12 2-Bl |
1 x | ESC ALPHA 60A HV |
1 x | Motor class 550 + "M" gearbox 2,85:1 |
|
7,288.15EUR |