| 2 x | TX 250 mW especial GOPRO |
| 2 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
| 2 x | Servo NARO Max Std |
| 2 x | |
| 1 x | Hovercraft sailcloth |
| 1 x | Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC |
| 1 x | 10m servo "Premium" wire (white/red/blue) |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | Crimping tool |
| 1 x | Extinguisher CO2 - 2 Kg |
| 1 x | 5 line servos wire black (1 m) |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
| 1 x | Connector Sub-D 2+5 Male |
| 1 x | Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC |
| 1 x | 6 mm Quick clamp_S (10 pcs) |
| 1 x | 30 cm BEC cable (female) |
| 1 x | Green silicone 0,25 mm² wire (25 m) |
| 1 x | Balsa panel 1.5x100x1000 mm |
| 1 x | Bec MR UBEC 5A (5v/6v/7v) |
| 1 x | Ball Link Plier |
| 1 x | 30 cm BEC cable (male) |
| 1 x | Black silicone 1,0 qmm wire (50 m) |
| 1 x | CC 05 |
| 1 x | 2,5x60 mm allen screwdriver |
| 1 x | Connector CAN 15 |
| 1 x | 3,0x60 mm allen screwdriver |
| 1 x | A/C quality beech plywood 600x300x8.0 mm |
| 1 x | CC 02 |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 2 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | Balsa panel 2.0x100x1000 mm |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | Balsa panel 2.5x100x1000 mm |
| 1 x | Fabric scissors curved Premium, 16 cm / 6" length |
| 1 x | A/C quality beech plywood 1520x750x3.0 mm |
| 1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 2 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | 1/10 Pilot "Jack" |
| 1 x | 102x26 Ø6.0 mm aluminium core wheel |
| 1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
| 1 x | 115x29 mm (4.50") Type jets aluminium core wheel |
| 1 x | "Taxi Tank" Fuel Tank |
| 1 x | 100x50 mm SLH KOVO wheel |
| 1 x | Cable grommet Ø 4 mm (4 uds) |
| 3 x | Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz |
| 1 x | 80 mm rods set for direction control |
| 1 x | Cable grommet Ø 5 mm (4 uds) |
| 1 x | Cierre cabina aluminio Ø4, I=10 mm |
| 1 x | DYNAMOMETER S-1580 |
| 1 x | Clip fixing for wing (2 pcs) |
| 1 x | CNC FPV Display screen&Transmitter Holder Vertical |
| 1 x | Cable grommet 9.5 mm (4 uds) |
| 1 x | Allen wheel collar M3x3 |
| 1 x | 140 mm rods set for direction control |
| 1 x | 11 mm Rubber pads (14 pcs) |
| 1 x | 280 cc gasoline fuel tank complet |
| 1 x | 1/4 Pilot "Heidi" |
| 1 x | 28x5 mm wires output (2 pcs) |
| 1 x | Cable tie mounts 4.3 (4 uds) |
| 1 x | Foam wheel Ø 351 mm (2 pcs) |
| 1 x | Cooler motor type 400 |
| 2 x | Reductora IPS dual-motor 10,7:1 with spinner |
| 1 x | Propeller 10x4,7 SlowFlyer |
| 1 x | Cooler motor type 150 |
| 2 x | Reductora IPS 150 DX2BB-DXCS 9,7:1 |
| 2 x | Reductora IPS 150 DX2BB-CXCS 8,6:1 |
| 1 x | Propeller 3x3 |
| 1 x | Cooler motor type 300 |
| 1 x | Propeller 11x4,7 SlowFlyer |
| 2 x | Propeller 8x4 Electric |
| 2 x | Propeller 9x4,7 SlowFlyer |
| 1 x | Propeller 8x4,3 SlowFlyer |
| 1 x | Propeller 9x7 SlowFlyer |
| 1 x | 2,3 mm Prop Adapter M6 |
| 1 x | 290 mm 8x4 M4 shaft ship |
| 1 x | 3.2 mm Prop Adapter M6 |
| 1 x | 3,2 mm Prop Adapter M6 |
| 1 x | 10 mm Prop Adapter M12 |
| 1 x | 3 mm Prop Adapter M6 |
| 1 x | 12 mm portholes (10 pcs) |
| 1 x | 14 mm portholes (10 pcs) |
| 1 x | 14 mm Portholes for screws (10 pcs) |
| 1 x | 15x7 tree blades propeller |
| 1 x | 29,0 mm propeller (rigth propeller) |
| 1 x | 300x4 mm M4 shaft ship |
| 1 x | 3,2 mm Prop Adapter M6 |
| 1 x | 3 mm Leader (L 100 mm) |
| 1 x | 29,0 mm propeller (left propeller) |
| 1 x | 250 mm / 16 mm Airbrakes |
| 1 x | Short Switch On/Off micro |
| 1 x | Three-position switched channel, short |
| 1 x | wing/fuselage connector for 16 pines AWG 20-24 |
| 1 x | Goma arrancador Ø36 mm x 30 mm |
| 1 x | 25 mm Sandpaper file |
| 1 x | Circlick securite |
| 1 x | JetiBOX |
| 1 x | Schul-Malpinsel Gr.5 |
| 1 x | Connector Sub-D 2+5 Female |
| 1 x | Squared carbon wing joinner 5x5x220 mm |
| 1 x | Control for forward wheel (MINI) |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Carbon plate 350x150x4.0 mm |
| 1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
| 1 x | USB interface ALTIS |
| 1 x | Pine wood slat 10x10x1000 mm |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | PSC 5 |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | UBEC 6A KAVAN |
| 1 x | USB HLS prog. interface |
| 1 x | Selfstart electronic switch |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
| 1 x | Extension 2/3 lipos JST - JST/C |
| 1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
| 1 x | Battery charging cable XT60 |
| 1 x | Cockpit plastic closing |
| 1 x | Xplorer2 anemometro |
| 1 x | Hot Glue Stick RED |
| 1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
| 1 x | Panasonic Eneloop AA 1,2 V battery 19>00 mAh |
| 1 x | Cockpit aluminium closing 4.7g |
| 1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
| 1 x | Aro pasacable Ø20 mm (4 pcs) |
| 1 x | Covered closure or fairings |
| 1 x | Cockpit aluminium closing |
| 1 x | Motor ORBIT 20-12 with coolingfan |
| 1 x | Birch plywood plate 600x300x1.2 mm |
| 1 x | Female connector for 12 pines AWG |
| 1 x | Connectors banna oro 2 mm (M/F) |
| 1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
| 1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
| 1 x | Combo RAY C3542-1000 + ESC 60A |
| 1 x | Female connector for 10 pines AWG |
| 1 x | Cargador para AA/AAA Ni-MH & Ni-Cd |
| 1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
| 1 x | Carbon plate 350x150x1.5 mm |
| 2 x | Pushrod greyline 3/2 with coupler M2 |
| 1 x | Charger ISDT 608AC 200W |
| 1 x | Pushrod octagone 3/2 |
| 1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
| 1 x | Combo FOXY C3530-700 + FOXY 80 amp |
| 2 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
| 1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 2 x | 1804 2400KV Brushless Motor Qav 250 mini |
| 1 x | Cooler motor type 280 |
| 1 x | Motor brushless 1806 - 2300 Kv Cuadracopter |
 |
| 4,204.04EUR |
