| 1 x | Release wax 250ml |
| 2 x | 500 ml sealer (DOPE) |
| 2 x | Interface Jack Adapter IKARUS |
| 1 x | Presto SF Light Filler styrene-free (420 g) |
| 1 x | Plasti Dip Liquid Tape 429 ml black |
| 2 x | 20 g tin paste |
| 1 x | Plasti Dip Liquid Tape 429 ml orange |
| 1 x | 1000 ml sealer (DOPE) |
| 2 x | Spray adhesive INFUTAC (Clear) 500 ml |
| 2 x | Spannlack 1000 ml |
| 1 x | Universal Colour Paste deep black 250 g |
| 1 x | Nitroverdu 500 ml |
| 1 x | Spray YELLOW Inca Lexan 150ml |
| 2 x | RF9 Flight Simulator with Spektrum Controller |
| 2 x | Spray Graphit 33 |
| 1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
| 2 x | Paint gun for sprays |
| 1 x | Solvent Plasti Dip 1000 ml |
| 1 x | |
| 2 x | EasyFLY Addon |
| 1 x | Plasti Dip Liquid Tape 429 ml black |
| 1 x | Silicone adhesive ELASTOSIL® E4, tube/ 90 ml |
| 1 x | Spray adhesive AEROFIX 2 |
| 1 x | Universal Colour Paste deep black 50 g |
| 1 x | Painting GHT Lexan Black 150 ml |
| 2 x | Slave-cable USB Easy Sim |
| 1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
| 1 x | Turbina KINGTECH K320 G5 |
| 2 x | Adaptadores carga 6s JST-XH |
| 1 x | Adapter lead MPX/EC3 |
| 1 x | TrainerCord (master-learner) |
| 1 x | CC 05 |
| 1 x | CC 03 |
| 2 x | BEC 3A FOXY |
| 1 x | 4 LiPo XH>EH adapter |
| 1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 1 x | USB HLS prog. interface |
| 1 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | 3 LiPo XH>EH adapter |
| 2 x | 30 cm BEC cable (male) |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | Bec MR UBEC 5A (5v/6v/7v) |
| 1 x | Cabel charger transmitter GRAUPNER |
| 1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | BALSA triangular 10x10x1000 mm |
| 1 x | Pine wood slat 10x10x1000 mm |
| 1 x | Pine wood slat 5.0x5.0x1000 mm |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | Vasa model Catapult |
| 2 x | Circlick securite |
| 1 x | Cabel "Y" 15 cm |
| 1 x | Cable S.BUS 3 salidas 300 mm |
| 1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
| 2 x | Extension silicon 100 cm (Futaba) |
| 1 x | Prolongador S-Bus JR/JR 10cm |
| 1 x | Extension silicon 30 cm female (Graupner) |
| 1 x | Extension silicon 30 cm male (Futaba) |
| 2 x | Extension silicon 35 cm male (Futaba) |
| 1 x | Premium servo extension 75cm |
| 1 x | Extension 15 cm (Futaba) |
| 3 x | Extension silicon 10 cm (Futaba) |
| 1 x | Futaba Female 40 cm extension |
| 2 x | Extension 90 cm (Futaba) |
| 2 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
| 1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
| 1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
| 1 x | Premium servo extension 25cm |
| 1 x | Extension lead 15 cm Multiplex |
| 2 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
| 2 x | Extension 100 cm (Futaba) |
| 1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
| 1 x | Cable S.BUS 3 salidas 100 mm |
| 1 x | Premium servo extension 50cm |
| 1 x | Cabel "Y" 30 cm (graupner) |
| 1 x | Extension PVC 150 cm (Graupner) |
| 2 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | Carbon fiber rod 4.0 mmx1000 mm |
| 1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
| 1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
| 1 x | Carbon fiber rod 10 mm x 1000 mm |
| 2 x | Carbon fiber rod 0.8 mmx1000 mm |
| 1 x | Carbon fiber flat 1000x3.0x0.13 mm |
| 3 x | Carbon fiber rod 12 mm x 1000 mm |
| 1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
| 1 x | Carbon fiber rod 1.0 mm x 1000 mm |
| 2 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 2 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | Carbon fiber rod 6.0 mmx1000 mm |
| 2 x | Carbon fiber rod 2.0 mmx1000 mm |
| 1 x | Carbon fiber rod 8.0 mmx1000 mm |
| 1 x | Carbon fiber rod 2.5 mmx1000 mm |
| 1 x | Xplorer1 anemometro |
| 1 x | ABS tube 3.0x2.0x330 mm |
| 1 x | Brass rod Ø 1.5 mm x 1000 mm |
| 1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
| 1 x | Profile ABS half cane 3x1000 mm |
| 1 x | LOWER TOW HOOK |
| 1 x | Windsock Ozone L - 700 mm |
| 1 x | Partall paste 650 g |
| 1 x | Simulador RealFlight RF-9.5 S (sin emisora) |
| 2 x | SIMtransmitter 6 Mode 2 |
| 1 x | Hobbylite Filler, Balsa colour |
| 1 x | Soporte grifo FESTO (2 pcs) |
| 1 x | DPSI magnetic switch actuator (PCB) |
| 2 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 1 x | Wing Joiner ULTIMATUM 2.0 m |
| 1 x | Balsa panel 2.0x100x1000 mm |
| 1 x | A/C quality beech plywood 1520x750x4.0 mm |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Balsa panel 10x100x1000 mm |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | PARTALL® Hi-Temp Wax, 340 g |
| 1 x | Balsa panel 4.0x100x1000 mm |
| 2 x | Interface Realflight Simulator |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | 3.2 mm Prop Adapter M8 |
| 1 x | 6 mm Prop Adapter M8 |
| 1 x | Prop Shaft Adapter 5 mm/M8 "long" |
| 1 x | 2,3 mm Prop Adapter M6 |
| 1 x | 3,2 mm Prop Adapter M6 |
| 1 x | 3.17 mm Prop Adapter CN-Spinner |
| 1 x | 3 mm Prop Adapter M6 |
| 1 x | 2 mm Prop Adapter M6 |
| 1 x | 4 mm Prop Adapter M6 |
| 1 x | Round Rod 1,25x1000 mm |
| 1 x | ABS Strip 1.5x3.0x1000 mm |
| 1 x | 4 mm Prop Adapter M8 |
| 1 x | 2.3 mm Adapter for 30 mm spinners |
| 1 x | 10 mm Prop Adapter M12 |
| 2 x | Solarfilm Lite blue transp. 5m |
| 2 x | PVC transparent black termo-retract battery 185 mm (1 m) |
| 2 x | SIG Coverall 1.2x0.9 m |
| 2 x | Extension silicon 10 cm (Graupner) |
| 1 x | Prolongador S-Bus JR/JR 20cm |
| 1 x | Extension silicon 50 cm (Futaba) |
| 1 x | 200 mm extensión servo HITEC/JR |
| 1 x | Extension silicon 100 cm (Graupner) |
| 1 x | Bungee HLG Premium |
| 1 x | Extension silicon 75 cm (Futaba) |
| 1 x | Extension silicon 30 cm female (Futaba) |
| 1 x | Carbon fiber rod 1.5 mm x 2000 mm |
| 2 x | Carbon fiber rod 7.0 mmx1000 mm |
| 2 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | Carbon fiber rod 3.0 mm x 1000 mm |
| 1 x | Carbon fiber rod 14 mmx1000 mm |
| 1 x | Carbon fiber rod 5.0 mmx1000 mm |
| 1 x | Digital Air Speed Sensor And Pitot Tube Set |
| 1 x | SKY RC T400Q Charger 4x100w |
| 1 x | PPM Encoder Module |
| 1 x | PIX Hawk with accesories |
| 1 x | GameCommander USB Universal |
| 1 x | Charger SKY RC e680 |
| 1 x | SKY RC Temperature Sensor |
| 1 x | Charger ISDT 608AC 200W |
| 1 x | Cargqador GensAce IMARS III Pro Smart Balance RC |
| 2 x | Charger SKY RC D200 neo |
| 1 x | TA1200 Charger Compatible with Smart and Standard LiPo Batteries |
| 1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
| 1 x | ABS Strip 1.5x4.0x1000 mm |
| 1 x | Spinner NUT M8x1,25 |
| 2 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
| 1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
| 1 x | Spinner Alumin. fixed propeller 45 mm / 6,0 mm |
| 1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
| 1 x | Oracover light Grey 2m |
| 1 x | Spinner NUT M6 |
| 1 x | Spinner NUT M6 |
| 1 x | Spinner Alumin. fixed propeller 40 mm / 3,0 mm |
| 1 x | Spinner NUT 1/4x28 |
| 1 x | Spinner Alumin. fixed propeller 40 mm / 3,2 mm |
| 1 x | Spinner Alumin. fixed propeller 40 mm / 4,0 mm |
| 1 x | Tren de cola carbono 50-70cc |
| 1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
| 1 x | Prop Shaft Adapter 6 mm/M8 "long" 35 mm |
| 1 x | 4 mm Prop Adapter CN-Spinner |
| 1 x | Rigid coupling brass Ø 3 mm L: 20 mm |
| 1 x | Propeller RABOESCH M4 45 mm (3 Blades pr) (Right hydropropeller) |
| 1 x | Extension 7.5 cm |
| 1 x | Falcon Carbon Spinner 82mm for electric motor |
| 1 x | Spinner Alumin. fixed propeller 50 mm / 4,0 mm |
| 1 x | 89 mm INO spinner (carbon imitation) |
| 1 x | F3A carbon 75 mm spinner for Hacker C-50 |
| 1 x | Spinner 82mm Black ventilado |
| 1 x | Quick hose connector 3-3 mm |
| 1 x | Tail wheel for 8-12 kg models |
| 1 x | Landing gear retract neumatic (Jet Legend) |
| 1 x | Z-shaped servo mount |
| 1 x | Servo arm with 4 mm hole to FEMA 9810A |
| 1 x | Quick hose connector 3-3 mm |
| 1 x | 5 mm Prop Adapter M8 |
| 1 x | Prop Shaft Adapter 4 mm/M8 "long" 35 mm |
| 1 x | Propeller RABOESCH M4 30 mm (3 Blades) (Right hydropropeller) |
| 1 x | L-Connector 1.5 mm x 1000 mm |
| 1 x | T-Connector 4.0 mm x 1000 mm |
| 1 x | 290x4 mm M4 shaft ship |
| 1 x | L-Connector 4.0 mm x 1000 mm |
| 1 x | Cono NUT 5/16"x 24 -M4 |
| 1 x | PVC yellow battery termo-retract 69 mm (10 m) |
| 1 x | PVC yellow transparent battery termo-retract 68 mm (1 m) |
| 1 x | Tail gear set (60-120 class) |
| 1 x | PVC yellow transparent battery termo-retract 69 mm (10 m) |
| 1 x | PVC transparent red battery termo-retract 68 mm (10 m) |
| 1 x | SIG Coverall 1.2x4.5 m |
| 1 x | PVC yellow-orange transparent battery termo-retract 57 mm (1 m) |
| 1 x | SIG Coverall 1.2x1.8 m |
| 1 x | Extension silicon 35 cm (Futaba) |
| 1 x | Extension silicon 30 cm male (Graupner) |
| 1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
| 1 x | Futaba male 40 cm extension |
| 1 x | Extension silicon 25 cm (Graupner) |
| 1 x | Squared carbon wing joinner 5x5x220 mm |
| 1 x | Carbon fiber rod 16 mm x 1000 mm |
| 1 x | Tube Pitot to PIXHAWK |
 |
| 10,714.42EUR |
