| 1 x | 800TVL CMOS camera for FPV |
| 1 x | ABS tube 18.0x16.0x1000 mm |
| 1 x | ABS tube 14.0x10.0x1000 mm |
| 1 x | ABS tube 16.0x14.0x1000 mm |
| 1 x | ABS tube 3.0x2.0x1000 mm |
| 1 x | ABS tube 10.0x8.0x1000 mm |
| 2 x | ABS tube 5.0x4.0x1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
| 1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
| 2 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
| 1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
| 1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
| 1 x | ABS tube 2.0x1.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
| 2 x | ABS tube 20.0x18.0x1000 mm |
| 1 x | ABS tube 5.0x3.0x1000 mm |
| 1 x | ABS tube 4.0x2.0x1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 2 x | ABS tube 9.0x7.0x1000 mm |
| 1 x | ABS tube 6.0x5.0x1000 mm |
| 1 x | ABS tube 7.0x6.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
| 1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
| 1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
| 1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
| 1 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
| 1 x | 1/6 Pilot "Buddy" |
| 1 x | 1/4 Pilot "Heidi" |
| 1 x | 1/12 Pilot "Langley" |
| 1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
| 1 x | Piloto JET 1:3,5 |
| 1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
| 1 x | 1/6 Pilot "Garry" |
| 1 x | Pilot "Duke" Legends Series (Slimline) |
| 1 x | Civilian pilot "Joe" size 9cm (Slimline) |
| 1 x | Piloto jet 130 mm |
| 1 x | Pilot "Anthony" (Slimline) |
| 2 x | 1/4 Pilot "Mike" |
| 1 x | 1/6 Pilot "Tony" |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 1 x | ABS "T" angle 8.0x8.0x1000 mm |
| 1 x | ABS angle 4,0x4,0x1000 mm |
| 1 x | Quicklock washer 3.5 mm (10 pcs) |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | Copier 5x20 cm pcs |
| 1 x | Shirt Hispano Aviación |
| 1 x | Support conector MPX (6 pcs) |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
| 1 x | ABS tube 9.0x8.0x1000 mm |
| 1 x | Carbon plate 350x150x1.0 mm |
| 1 x | 1/10 Pilot "Jimmy" |
| 1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
| 1 x | ABS tube 8.0x7.0x1000 mm |
| 1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
| 1 x | Skies 2x 335 mm + 1x Esqui 250mm |
| 1 x | Fiberglass 163 g/m² 1m x 5 m (Twill) |
| 1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 5m |
| 1 x | Fiberglass 5000x1100 mm 49 g/m² |
| 1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Combo lighting module with covering drop shape |
| 2 x | Cover cap drop-shaped paintable 43 mm |
| 1 x | Tailwheel for F3A size |
| 2 x | Glass fibre sleeve Ø 20 mm X 20m |
| 1 x | Glass fabric 163 g/m² 130cmx5m (Interglas 92105, aero, finish |
| 1 x | Xplorer4 anemometro |
| 1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
| 1 x | Aro pasacable Ø25 mm (4 pcs) |
| 1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
| 1 x | Resistor 3W 5% OR47 |
| 1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m |
| 1 x | Aluminium servo arm (2 uds) |
| 1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
| 1 x | Hot Glue Stick BLACK |
| 1 x | Glass fabric 25 g/m² (1 m²) |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
| 1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 1 x | 28 mm tailwheel unit |
| 1 x | Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl |
| 1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
| 2 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
| 1 x | PVC grid diagonal 290x185x0.32 mm |
| 1 x | Glass fibre braided sleeve (45mm) roll 20m |
| 1 x | Tailwheel for 60/120 size |
| 1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 10 m |
| 1 x | Hot Glue Stick GREEN |
| 1 x | Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain) |
| 1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
| 1 x | Carbon Non-Woven, 240 g/m² 100 cm x 20 m |
| 1 x | AC-10 pre-rotacion with motor |
| 2 x | Glass fibre sleeve Ø 20 mm |
| 1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 1 x | Oils Pumps Empty (1 liter) |
| 1 x | Bateria LRP 2200-7.2v 6 cell NiMH |
| 1 x | Chopped glass fibre strands 3 mm |
| 1 x | Resistor 3W 5% 2R2 |
| 1 x | Ball Link Plier |
| 1 x | Carbon Non-Woven, 245 g/m² 125 cm x 20 m |
| 1 x | Fiberglass 25 g/m² 5000x1270 mm |
| 1 x | NF-1 RC set |
| 1 x | Landing gear retract neumatic (Jet Legend) |
| 2 x | Encendido CDI RCAME 1/4*32 Single 120º |
| 2 x | RCEXL Electronic ignition twin A-02 |
| 1 x | GLOW 2C + accesories |
| 2 x | Aluminium ignition bad (red) |
| 2 x | Compact on-board starting system (9715) |
| 1 x | RCEXL Electronic ignition twin CM-6 |
| 1 x | Electric rocket starters (6 pcs) |
| 1 x | Parachute expulsion foam |
| 1 x | Black smoke bombs AX-60 (5 pcs) |
| 1 x | Compact on-board starting system (9525) |
| 1 x | Program 5v SIO RS 232 |
| 1 x | Lense for Spotlights, 20mm |
| 1 x | EasyFLY Addon |
| 1 x | Jet Afterburner Simulator NF-Jet2YY Set |
| 1 x | Stickers-digit for marking |
| 1 x | Remote electric ignition system |
| 2 x | PH5 adapter for 5mm M8 axi for AXI2820 y 2826 |
| 2 x | Fibra vidrio 25g 110 cm/ 100m (Interglass 02034, finish FE800 p |
| 1 x | AXI 2808/20 V2 |
| 1 x | Wheel FEMA 112 mm / 6 mm |
| 1 x | Motor mount M |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | Extension 7.5 cm |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | DUPLEX 2.4EX Expander E2 |
| 1 x | GLOW 9C + accesories |
| 2 x | Compact on-board starting system (9713) |
| 1 x | Propeller Pleg CAM Carbon 12.5x6 |
| 1 x | Propeller Pleg CAM Carbon 11x5 |
| 1 x | Propeller Pleg CAM Carbon 11x4 |
| 1 x | Frontal Adapter for AXI53xx |
| 2 x | PH6 adapter for 6mm M10 AXI for AXI41xx |
| 1 x | Turbine LYNX 130 |
| 1 x | AXI 2820/14 V2 |
| 1 x | Tail gear set (60-120 class) |
| 1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 5 m |
| 1 x | Universal Prop Saver |
| 1 x | AXI 2217/20 V2 Long "F5J" |
| 2 x | AXI 2814/10 V2 |
| 1 x | MOTOR MOUNT RODS AXI 53XX AND AXI 81XX 60MM (4PCS) |
| 1 x | Colormatic 2K Soft fine putty white, 1 kg |
| 1 x | 400 Newtons FEMA absorber |
| 1 x | Prop Holder AXI 41xx V2 |
| 1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 20m |
| 1 x | Peel ply 100 g/m² (plain weave) 50 cm x 2m |
| 1 x | Tailwheel for 20/60 size |
| 1 x | AXI 2212/26 V2 |
| 1 x | 200 Newtons FEMA absorber |
| 1 x | AXI 2826/6 V2 Long |
| 1 x | Wheel FEMA 165 mm / 8 mm |
| 1 x | AXI 2814/16 V2 |
| 2 x | AXI 2814/16 V2 Long |
| 1 x | Tailwheel for 1-3 kg models |
| 1 x | 3x8W Triple-Spotlight, 12mm, T-Fuse White |
| 1 x | Receiver bed (Blue) |
| 1 x | Fan for A60 |
| 1 x | A50 Motor Mount Alu complete set |
| 1 x | Horn 16,5x20 mm (2 pcs) |
| 1 x | MR30 connector female |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | AXI 2826/10 V2 Long |
| 1 x | Set luces Airliner 2.1m Wingspan Scale 1:14 Civil/Sport |
| 1 x | Ø 28 mm fiberglass motor-holder for electric motors |
| 1 x | Cooler motor type 300 |
| 1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
| 1 x | Winter-Glove DS tx |
| 1 x | DUPLEX 2.4EX MSpeed PITOT <300 Km/h |
| 1 x | DUPLEX 2.4 EX MVario2 |
| 1 x | DUPLEX 2.4EX Central Box 220 |
| 1 x | Servo NARO Max Std |
| 2 x | Aluminium ignition bad (blue) |
| 1 x | GLOW 5C + accesories |
| 1 x | Propeller MEJZLIK 9,5x3 SF Carbon Indoor |
| 1 x | Propeller MEJZLIK 21x10 Electric light (36 g) |
| 1 x | Propeller MEJZLIK 20x13 Electric light (41 g) |
 |
| 14,155.45EUR |
