| 1 x | 800TVL CMOS camera for FPV |
| 2 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | Cierre cabina aluminio Ø4, I=10 mm |
| 1 x | Truck-trailer for gliders 720 x 239 mm |
| 1 x | Locking cable tie 4.6x203 (uds) |
| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | WingFix ULTRA Black Edition |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 2 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 2 x | Propeller balancer |
| 2 x | SUS wire 3m (nylon coated) |
| 2 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 2 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 2 x | Locking cable tie 2.5x100 (uds) |
| 1 x | Field folding model stand SebArt |
| 1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 3 x | Angle measurer |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | One touch canopy lock |
| 1 x | Surface Indicator Gauge Small |
| 1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
| 1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
| 1 x | Brass control horn M4 short for wire (4 pcs) |
| 1 x | Horn 16,5x20 mm (2 pcs) |
| 1 x | Horn 6/20 with M3 Bearing |
| 1 x | Xplorer1 anemometro |
| 2 x | Xplorer3 anemometro |
| 1 x | Xplorer2 anemometro |
| 1 x | Shirt Hispano Aviación |
| 1 x | Jeti Black cap |
| 1 x | Softshell Hispano Aviación |
| 2 x | Vest clothes Hispano Aviación |
| 1 x | Cap Hispano Aviación |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
| 1 x | PIX Hawk with accesories |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | Vacuum bag, 1200 mm x 50 m |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | ABS Strip 1.5x4.0x1000 mm |
| 1 x | Lock washer 3.2 mm (20 pcs) |
| 1 x | M2 5Diam short black ball link V2 (2 pcs) |
| 1 x | Straightened rod Ø 8.0 mm x 1000 mm |
| 1 x | Smoke set "S" |
| 1 x | Aluminium blue ball links M3 V1 (10 pcs) |
| 1 x | Conector JR/Uni Servo female BLUE silicon (10 pcs) |
| 1 x | Profile ABS half cane 2.5x1000 mm |
| 1 x | Connectors banna oro 2 mm (M/F) |
| 1 x | 100g Flux Paste for Silver Solder |
| 1 x | RX cabel |
| 1 x | Allen wheel collar M3x5 |
| 1 x | Lead with adhesive (2 pcs) |
| 2 x | Truck-trailer for gliders 720 x 285 mm |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | Pushrod octagone 3/2 |
| 1 x | Landing gear frontal support 29x26x13,5 |
| 1 x | Pushrod octagone 4/3 with coupler M3 |
| 1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 1 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
| 1 x | Steering arm 16 mm Ø 3 mm |
| 1 x | Tip wing protector 40x14 (2 pcs) |
| 1 x | Battery LiFe TopFuel 3100 mAh 4s MTAG 30C |
| 1 x | Foam plastic plates (310x210x8 mm) |
| 1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
| 1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
| 1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
| 1 x | Fiberglass plate 350x150x3.0 mm |
| 1 x | LiPo Storage Box Type "P" |
| 1 x | Extra long horn 60x30 |
| 1 x | Rudder forward 80x28 "type Kato" |
| 1 x | Medium extra-strong control horn with bearing 2,8x24 |
| 1 x | Canopy Latch |
| 1 x | Long adjustable control horn 3x34 |
| 1 x | Horn mando small (2 pcs) |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | Horn mando long (2 pcs) |
| 1 x | Small adjustable aluminium control horn with bearing 2,8x15 |
| 1 x | Brass control horn M4 long for wire (4 pcs) |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
| 1 x | Propeller balancer |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 1 x | ABS tube 7.0x5.0x1000 mm |
| 1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
| 1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
| 1 x | ABS tube 3.0x2.0x330 mm |
| 1 x | ABS tube 5.0x3.0x1000 mm |
| 1 x | RF9 Flight Simulator with Spektrum Controller |
| 1 x | X-RAY Micro QR (Elevator) |
| 1 x | Fiberglass plate 620x540x1,0 mm |
| 1 x | Fiberglass plate 350x150x1.5 mm |
| 1 x | Fiberglass 25 g/m² 5000x1270 mm |
| 1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
| 1 x | Film release agent PVA 25 ml |
 |
| 5,077.08EUR |
