| 1 x | Motor A2212/13T |
| 1 x | ABS tube 5.0x4.0x1000 mm |
| 1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
| 1 x | ABS tube 7.0x6.0x1000 mm |
| 1 x | ABS tube 2.0x1.0x1000 mm |
| 1 x | ABS tube 7.0x5.0x1000 mm |
| 1 x | ABS tube 10.0x8.0x1000 mm |
| 1 x | ABS tube 5.0x3.0x1000 mm |
| 1 x | ABS tube 12.0x10.0x1000 mm |
| 2 x | Hot Glue Stick RED |
| 1 x | Ball Link Plier |
| 2 x | |
| 1 x | Cut tube |
| 2 x | Ball Link Plier |
| 1 x | Digital scale up to 40 kg |
| 2 x | 2,0x50 mm allen screwdriver |
| 1 x | Starter EM Gear Power 250 |
| 1 x | Crimping tool |
| 1 x | Hot Glue Stick GREEN |
| 1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
| 1 x | Vacuum pump P1-N |
| 1 x | Starter 12v (Max 180 and 30ccm) |
| 1 x | USB Mini Camera endoscope |
| 1 x | Circlik for shaft 1.2 mm (10 pcs) |
| 1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
| 1 x | Lock washer 2.7 mm (20 pcs) |
| 1 x | Flat washer 2.2 mm (20 pcs) |
| 1 x | Aluminium cap bolt washer M3 green (8 pcs) |
| 1 x | Quicklock washer 3 mm (10 pcs) |
| 1 x | Aluminium wide washer M3 blue (4 pcs) |
| 1 x | Aluminium cap bolt washer M4 red (8 pcs) |
| 1 x | M3-M4 rubber washer (8 pcs) |
| 1 x | Aluminium cap bolt washer M3 black (8 pcs) |
| 1 x | Flat washer 2.7 mm (20 uds)pcs) |
| 1 x | Flat washer 4.3 mm (20 pcs) |
| 1 x | Ferrita 17x10x6.5 mm |
| 1 x | Aluminium wide washer M3 red (4 pcs) |
| 1 x | Flat washer 1.7 mm (20 pcs) |
| 1 x | Ferrita 14x8x5.5 mm |
| 1 x | Spring lock washer 2.6 mm (20 pcs) |
| 1 x | Aluminium cap bolt washer M3 red (8 pcs) |
| 1 x | Quicklock washer 2.5 mm (10 pcs) |
| 1 x | Quicklock washer 3.5 mm (10 pcs) |
| 1 x | Spring lock washer 2.1 mm (20 pcs) |
| 1 x | Quicklock washer 4 mm (10 pcs) |
| 1 x | Aluminium wide washer M4 Red (4 pcs) |
| 1 x | Circlik for shaft 1.9 mm (10 pcs) |
| 1 x | 800TVL CMOS camera for FPV |
| 1 x | Quicklock washer 1 mm (10 pcs) |
| 1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
| 1 x | Connectors banna oro 8,0 mm (M/F) |
| 1 x | Conector Servo female 4 pines |
| 1 x | Banna gold connector 2,5 mm (M/F) |
| 2 x | XH female balance (5S) connector (2 pcs) |
| 1 x | XH female balance (2S) connector (2 pcs) |
| 1 x | XH male balance (2S) connector (2 pcs) |
| 1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
| 1 x | 2 mm female connector (2 pcs) with safety connector |
| 1 x | XH female balance (4S) connector (2 pcs) |
| 1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
| 1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
| 1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
| 1 x | Conector BEC female (10 pcs) |
| 1 x | Connectors banna oro 6,0 mm (M/F) |
| 1 x | Connectors banna oro 0,8 mm (M/F) |
| 1 x | 2 mm male connector (2 pcs) with safety connector |
| 1 x | Connectors DEANS (T) |
| 1 x | Oratex Red Fokker 10 m |
| 1 x | Straightened rod Ø 8.0 mm x 1000 mm |
| 1 x | ABS angle 4,0x4,0x1000 mm |
| 1 x | Canopy Latch |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
| 1 x | Glases Flitemaster |
| 1 x | Gates hinge black 30x16 mm (2 pcs) |
| 1 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
| 1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
| 1 x | Y-Hose connector 3-3-3 mm |
| 2 x | Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g |
| 1 x | Mould Resin P + Hardener EPH 161-P, kit/ 585 g |
| 1 x | FESTO connector M5 Quick 4 mm |
| 1 x | Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l) |
| 1 x | T-Hose connector 4-4-4mm |
| 1 x | Quick hose connector 6-6 mm |
| 1 x | Ferrita 27x14x7 mm |
| 1 x | XT60 Connector with Holder Male 2pcs |
| 1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm) |
| 1 x | Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm) |
| 1 x | Carbon tube (L 2000 mm, Ø16 mm, Ø14 mm) |
| 1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm) |
| 1 x | Starter Sullivan-STAR 603 DINATRON |
| 1 x | Welder 100W/200V |
| 1 x | Screwdriver for Torx® TX6 |
| 1 x | Screwdriver for Hexagon 1,27mm |
| 1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
| 1 x | EC-Cutter |
| 1 x | SERVO DES 568 MG |
| 1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
| 1 x | Sealing Iron Profi LCD |
| 1 x | MIG 29 3D RTF, Servo |
| 1 x | Dust collector for mould cleaning |
| 1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
| 2 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
| 1 x | Copier 5x20 cm pcs |
| 1 x | |
| 1 x | Soldering tip for KAVAN soldering iron KAV66.8338 |
| 1 x | Pistola termica MH 550 micro |
| 1 x | Servo JETI DSHV 3D13T (13 Kg) |
| 1 x | Disposable Injector Bags (30x16cm) 100 pcs |
| 1 x | SERVO DES 806 Pignons |
| 1 x | Soporte metal para servos |
| 1 x | Laminating brush 10 mm, pack/ 50 pcs |
| 1 x | Carbon servo arms for HITEC HS 65 (4 pcs) |
| 1 x | Crimping tool |
| 2 x | Propeller diller for DA50, DLE55 red |
| 1 x | Digital precision scale up to 2000 g |
| 1 x | 3,0x60 mm allen screwdriver |
| 1 x | Starter 12v (Max 90 and 15ccm) |
| 1 x | |
| 1 x | Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox |
| 1 x | SD HC 8 GB |
| 1 x | Futaba 54 mm servo arm with ball link |
| 1 x | Servo KST X20-7512 V8.0 82kg 8.4v |
| 1 x | HITEC DPC-11 programmer |
| 1 x | Servo inverter |
| 1 x | FUTABA 20 mm servo arm with ball link |
| 1 x | Futaba 52 mm servo arm |
| 1 x | Soporte servo KST X10 mini / DS135MG |
| 1 x | Pan Head Screw M2x6 PH |
| 1 x | Catalog AERO-NAUT 2016 |
| 1 x | Connectors MPX male (PIN double) |
| 1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
| 1 x | Conector JR Servo male (10 pcs) |
| 1 x | Wing connector 8pin with pin strip, plug & socket |
| 1 x | Red 3m5 mm connector holder |
| 1 x | XH male balance (8S) connector (2 pcs) |
| 1 x | 2,3 mm Prop Drive Günther M4 |
| 1 x | Bag connector 2 mm |
| 1 x | XH female balance (8S) connector (2 pcs) |
| 1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
| 1 x | Connectors MPX female |
| 1 x | 10 mm dogdrive props |
| 1 x | Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg |
| 1 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
| 1 x | Extension Arm for Carburetor |
| 1 x | Reed valve for DA 50-R |
| 1 x | Suction funnel for carburetor 90D-M (red) |
| 1 x | Hardener Aero EPH 161 (250 g) |
| 1 x | Hardener Aero EPH 161 (500 g) |
| 1 x | resin-hardener package L-385 with hardener H-385 |
| 1 x | Epoxy Resin L (2.5 Kg) |
| 1 x | Mould Resin P 10 kg |
| 1 x | Epoxy Resin L + Hardener CL (60 min) kit/ 930 g |
| 1 x | resin-hardener package L-385 with hardener H-385 (3.5 Kg) |
| 1 x | Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs |
| 1 x | White gelcoat 1 Kg |
| 1 x | Charger LiPo Charger4 |
| 1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
| 1 x | Sheave Pl. 1R. 3 mm |
| 1 x | 11 mm wing servo holder |
| 1 x | 18 mm wing servo holder |
| 1 x | 50x45 mm micro-mini servo cover |
| 1 x | Servo BMS-4112 |
| 1 x | 58 mm micro servo cover |
| 1 x | Servo TOPMODEL DS1413 T |
| 1 x | Dremel PERMAGRIT thin lime |
| 1 x | Sealing Iron Sleeve PROF |
| 1 x | Fresa corte diamante Ø 1.0mm (bola) |
| 1 x | Propadapter for motor A50 |
| 1 x | Futaba 25 mm servo arm with ball link |
| 1 x | Hitec 52 mm servo arm |
| 1 x | Top light 6mm/3V Red (2 pcs) |
| 1 x | Foreman, scale 1:32 |
| 1 x | Noray 48 mm (5 pcs) |
| 1 x | Propeller RABOESCH.Ms 70L (5 Blades) (Left hydropropeller) |
| 1 x | Ringöse 12 mm (50 pcs) |
| 1 x | 13 mm wing servo holder |
| 1 x | Servo AN-20 MGBBA |
| 1 x | Life guard Ø 8 mm (24 pcs) |
| 1 x | Coupling for 4 mm axis |
| 1 x | Railing 5x100 mm |
| 1 x | Sandpaper file 13 mm |
| 1 x | DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301) |
| 1 x | PROXXON - TRIANGLE / DELTA SANDING MACHINE OZI/E |
| 1 x | Sealing Iron Sleeve STD |
| 1 x | 55% silver electrodes (2 pcs) |
 |
| 5,325.59EUR |
