| 1 x | Silent-blocks DLE 170M |
| 1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
| 1 x | A/C quality beech plywood 600x300x0.6 mm |
| 1 x | Straightened rod Ø 1.5 mm x 1500 mm |
| 1 x | Protective Cover for wires Ø 15 mm 1000 mm |
| 1 x | Jeti Black cap |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | Oracover CARBON Metalic 1 m |
| 1 x | Angle of incidence meter |
| 1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
| 1 x | Ply-Span 450x600/13g Blue |
| 2 x | Carbon fiber rod 1.0 mm x 1000 mm |
| 1 x | Monokote ROJO misil (1.8x0.65m) |
| 1 x | 20x1000 mm Ring Strap Back To Back |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | Carbon fiber rod 14 mmx1000 mm |
| 1 x | Angled clevis with threaded rod M3 |
| 1 x | 30 cm BEC cable (male) |
| 1 x | Oratex Natural White 2m |
| 1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Brass ball links BS M3 V1 (10 pcs) |
| 1 x | Couple M4 for wire (10 pcs) |
| 1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
| 2 x | Field folding model stand SebArt |
| 2 x | Truck-trailer for gliders 720 x 285 mm |
| 1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
| 2 x | Squared carbon wing joinner 5x5x220 mm |
| 1 x | SE Ring HACKER 300 mm (2 pcs) |
| 1 x | Z type of cable coupler Ø 1.8 (2 uds) |
| 1 x | ABS "T" angle 8.0x8.0x1000 mm |
| 1 x | Screwdriver for Torx® TX6 |
| 1 x | Extension silicon 100 cm (Graupner) |
| 1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
| 2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | White smoke canister 100 g |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 1 x | ABS angle 5,0x5,0x1000 mm |
| 1 x | ABS "T" angle 4.0x4.0x1000 mm |
| 1 x | Green smoke canister 100 g |
| 1 x | 1/12 Pilot "Fighter" |
| 1 x | L-Connector 1.0 mm x 1000 mm |
| 1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
| 1 x | Extension silicon 100 cm (Futaba) |
| 1 x | 3l Smoke oil |
| 1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
| 2 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | Hot Glue Stick RED |
| 2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
| 1 x | Parachutist |
| 1 x | Lock washer 4.3 mm (20 pcs) |
| 1 x | "S" set for boats |
| 1 x | 1,5x50 mm allen screwdriver |
| 2 x | Aluminium cap bolt washer M3 blue (8 pcs) |
| 1 x | Premium servo extension 25cm |
| 2 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
| 1 x | Yellow smoke canister 140 g |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 1 x | Red smoke canister 65 g |
| 1 x | Fox MDM 1 6000 mm |
| 1 x | Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models) |
| 1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
| 1 x | SkyMaxx 1.550 mm (kit) |
| 1 x | Jodel D.9 BeBe 2.400 mm Kit |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
| 1 x | Servo KST X10 V2.0 ala 10mm 28g 10.8Kg |
| 1 x | Servo KST A08H V6.0 3,2Kg HV |
| 1 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 1 x | Servo KST X20-7512 V8.0 82kg 8.4v |
| 1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
| 1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
| 1 x | Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs) |
| 1 x | Blind nut M3 (4 pcs) |
| 1 x | Blind nut M4 (10 pcs) |
| 1 x | Aluminium wide washer M3 red (4 pcs) |
| 1 x | Tape GFK 25 mm |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | SE Ring 330 mm (4 pcs) |
| 1 x | Angle measurer |
| 1 x | Field folding model stand |
| 1 x | Medidor ángulos y/o incidencias |
| 1 x | wing/fuselage connector for 16 pines AWG 20-24 |
| 1 x | Propeller balancer |
| 1 x | wing/fuselage connector for 3 pines AWG 20-24 |
| 1 x | Truck-trailer for gliders 720 x 239 mm |
| 1 x | RX external cable for estandar receivers |
| 1 x | USB Interface REVOLECTRIX for CellPRO 10s |
| 1 x | Surface Indicator Gauge Small |
| 1 x | wing/fuselage connector for 12 pines AWG 20-24 |
| 1 x | FOX MDM-1 3.500 mm ARF White |
| 1 x | Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg |
| 1 x | ALU servo arm 3 mm shaft |
| 1 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | Carbon fiber rod 1.5 mm x 2000 mm |
| 1 x | Carbon fiber rod 6.0 mmx1000 mm |
| 1 x | ALU servo arm 90º 3 mm shaft |
| 1 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
| 1 x | Carbon fiber flat 1000x3.0x0.5 mm |
| 1 x | LIBELLE Standard 3.8m D-box H-201 |
| 1 x | BLANIK 50 V2 Silver/Orange (SebArt) |
| 1 x | Carbon fiber flat 1000x3.0x0.13 mm |
| 1 x | Universal batery Tester |
| 1 x | Carbon fiber rod 4.0 mmx1000 mm |
| 1 x | Servo KST BLS915 HV V8.0 25Kg 20mm 78g |
| 1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
| 1 x | Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar |
| 1 x | Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor |
| 1 x | Carbon fiber rod 2.5 mmx1000 mm |
| 1 x | Carbon fiber rod 0.8 mmx1000 mm |
| 1 x | Servo KST X06H - 1.8Kg.cm 7mm 6g |
| 1 x | Carbon fiber rod 5.0 mmx1000 mm |
| 1 x | Servo AN-20 MGBBA |
| 1 x | Servo KST BLS825 V8.0 HV 35Kg 8.4v |
| 1 x | Carbon fiber rod 7.0 mmx1000 mm |
| 1 x | Servo KST DS125MG servo ala 10mm 28g 7Kg |
| 1 x | "L" servo arm 65x49 mm (2 pcs) |
| 1 x | Servo KST X08H V5.0 HV DIGITAL Wing servo 8mm |
| 1 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | Carbon roving DowAksa / 24k / 1600 tex |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
| 1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
| 1 x | Blind nut M5 (4 pcs) |
| 1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
| 1 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
| 1 x | Blind nut M6 (4 pcs) |
| 1 x | Aluminium cap bolt washer M3 green (8 pcs) |
| 1 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
| 1 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
| 1 x | Aluminium cap bolt washer M4 green (8 pcs) |
| 1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
| 1 x | CARBON CUB 15cc ARF 2280 mm |
| 1 x | EXTRA NG 85" 2159mm red/white |
| 1 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
| 1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
| 1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
| 1 x | YAK-23 "FLORA" (RBC Kits) |
| 1 x | CESSNA 50E White/Blue |
| 1 x | Blade holder upper |
| 1 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
| 1 x | Set of buckles and strap, 1:4 scale. |
| 1 x | SAGITA Alsema 4.0 m |
| 1 x | Ventus 2cx 4.5 m Canopy |
| 1 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 1 x | Motor Mount for TITAN ZG45 and ZG62, length 36 mm |
| 1 x | SE Ring 400 mm (2 pcs) |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | LASER 73" 1.85m (05) PILOT |
| 1 x | Bidule 55 V3 2460 mm |
| 1 x | SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm |
| 1 x | EXTRA NG 85" 2159mm yellow/blue |
| 1 x | CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9) |
| 1 x | Bidule 170 ARF 3.48 m |
| 1 x | M2,5 Diam metal ball link V3 (2 pcs) |
| 1 x | Socket head ball link M3 (2 uds) |
| 1 x | 6 mm hexagonal ball link M3 (10 pcs) |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | Interface Realflight Simulator |
| 1 x | de Havilland Vampire (Rc Factory) |
| 1 x | F-104 Starfighter USAF (SebArt) |
 |
| 24,428.12EUR |
