| 1 x | Modulo PPM Encoder |
| 4 x | PIX Hawk con accesorios |
| 2 x | Sensor digital Air Speed con Pitot |
| 3 x | Tubo Pitot para PIXHAWK |
| 2 x | Varilla carbono 14 mmx1000 mm |
| 1 x | Varilla carbono plana 10.0 x 1.0 x 1000 mm |
| 2 x | Varilla carbono 0.8 mmx1000 mm |
| 2 x | Varilla carbono plana 1000x3.0x0.5 mm |
| 1 x | Varilla carbono plana 1000x3.0x1.0 mm |
| 2 x | Varilla carbono plana 1000x3.0x0.13 mm |
| 2 x | Bayoneta de carbono 13,4 mm Ø 0,48 mm |
| 1 x | Varilla carbono 1.0 mm x 1000 mm |
| 1 x | Bayoneta de carbono cuadrada 5x5x220 mm |
| 2 x | Varilla carbono plana 3.0 x 1.0 x 1000 mm |
| 3 x | Varilla carbono 1.5 mm x 1000 mm |
| 1 x | Varilla carbono 3.0 mm x 1000 mm |
| 2 x | Varilla carbono 0.5 mmx1000 mm |
| 1 x | Varilla carbono 2.5 mmx1000 mm |
| 2 x | Varilla carbono 12 mm x 1000 mm |
| 1 x | Varilla carbono 16 mm x 1000 mm |
| 1 x | Varilla carbono 5.0 mmx1000 mm |
| 2 x | Varilla carbono 2.0 mmx1000 mm |
| 1 x | Varilla carbono 7.0 mmx1000 mm |
| 2 x | Varilla carbono 10 mm x 1000 mm |
| 1 x | Varilla carbono 1.5 mm x 1000 mm |
| 2 x | Varilla carbono 8.0 mmx1000 mm |
| 3 x | Varilla carbono plana 1000 x 5.0 x 1.0 mm |
| 1 x | Varilla carbono 20 mmx1000 mm |
| 3 x | Varilla carbono 4.0 mmx1000 mm |
| 1 x | Varilla carbono plana 1000x6.0x0.8 mm |
| 2 x | Fibra carbono tela 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | Fibra carbono tela 160g/m2 127 cm x 10 m |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | Cinta fibra de vidrio 225g / m² (Silane, liso) 40 mm, 50m |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 5 m |
| 1 x | AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (10 pcs) |
| 2 x | Fibra carbono tela 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 2 x | AIREX® M060 lámina (amarilla) 1200x550x6,0 mm (5 pcs) |
| 1 x | Cinta fibra de vidrio 225g / m² (Silane, liso) 30 mm, 100m |
| 1 x | AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (10 pcs) |
| 1 x | Cinta fibra carbono 25 mm 3k 125 g/m2 x 50m |
| 1 x | Cinta fibra carbono 25 mm 3k 125 g/m2 x 10m |
| 1 x | AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (5 pcs) |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 3 m |
| 1 x | Cinta Roving carbono 20m |
| 2 x | Piloto civil "Pamela" tamaño 9cm (Slimline) |
| 1 x | Piloto civil "G-Man" tamaño 9cm (Slimline) |
| 2 x | Piloto 1/10 "Jack" |
| 2 x | Piloto militar "Kamikaze" tamaño 9cm (Slimline) |
| 1 x | Piloto 1/6 "John" |
| 1 x | Piloto civil "Gramps" tamaño 9cm (Slimline) |
| 1 x | Piloto 1/12 "Fighter" |
| 3 x | Piloto 1/6 "Tony" |
| 2 x | Piloto "Dick" Legends Series(Slimline) |
| 2 x | Piloto JET 1:3,5 |
| 1 x | Ferrita 27x14x7 mm |
| 2 x | CC 02 |
| 1 x | Adaptador MPX-XT60 10cm |
| 1 x | Adaptador 5 LiPos XH>EH |
| 1 x | Adaptador 4 LiPos XH>EH |
| 3 x | Cable "Y" carga 4 mm (2 IN-1 OUT) |
| 1 x | Adaptador TP/TopFuel - JST-EH 4/5S |
| 1 x | Alambre de cobre esmaltado Ø0,2 mm (5 m) |
| 2 x | Alambre cobre esmaltado 3 hilos trenzados rojo/negro/cobre Ø0,2 |
| 1 x | Cable "Y" equilibrador 7S, 2x JST-XH / 1x JST-EH |
| 1 x | Adaptador MPX-Dean "T" |
| 2 x | Adaptador TP/TopFuel - XH 2/3S |
| 1 x | Adaptador USB para elementos Jeti DUPLEX |
| 1 x | Cable carga bateria transmisor Multiplex 2x0,5 qmm (50 cm) |
| 1 x | CC 03 |
| 2 x | Circlick seguridad |
| 1 x | Cable "Y" equilibrador 6S, 2x JST-XH / 1x JST-EH |
| 1 x | Adaptador JST-XH |
| 1 x | Adaptador MPX-EC3 10cm |
| 2 x | Cable carga bateria transmisor Futaba 2x0,5 qmm (50 cm) |
| 1 x | Adaptador 2 LiPos XH>EH |
| 1 x | Cable de entrenamiento para GWS T4A II (maestro-alumno) |
| 1 x | Cable USB para programación HLS |
| 1 x | Alambre de cobre esmaltado en rojo Ø0,2 mm (5 m) |
| 1 x | Adaptador Dean "T" - Futaba |
| 1 x | APM2,6 Power module con BEC 5,3 V DC |
| 1 x | Adaptador 3 LiPos XH>EH |
| 2 x | Cable carga bateria transmisor Graupner 2x0,5 qmm (50 cm) |
| 1 x | Adaptador (GP/KO hasta 4S) para CellPRO 4S |
| 1 x | Cable BEC 30 cm (macho) |
| 1 x | Cable carga emisora GRAUPNER |
| 1 x | Bec MR UBEC 5A (5v/6v/7v) |
| 1 x | Varilla ABS 1,25x1000 mm |
| 1 x | Varilla ABS 1,5x1000 mm |
| 1 x | Rótula V3 aluminio M2,5 / 5 Diam con base corta (2 pcs) |
| 1 x | Tubo ABS 6,0x4,0x1000 mm |
| 1 x | Plancha fibra vidrio 350x150x2.5 mm |
| 1 x | Plancha fibra vidrio 620x540x2,0 mm |
| 1 x | Fibra carbono "MANGA" 12k 170 mm x 5 m |
| 1 x | Malla PVC diagonal 290x185x0,32 mm |
| 1 x | Fibra de vidrio 80 g/m² (10 m x 100 cm) |
| 1 x | Plancha de goma espuma (310x210x5 mm) |
| 1 x | Fibra vidrio 5000x1100 mm 49 g/m² |
| 1 x | Plancha termoformable 0,3 mm (0,039") DIN A4 |
| 1 x | Cinta carbono TeXtreme 38 g/m2 IM UD 20mm x 100 m |
| 2 x | Fibra de vidrio 100 g/m² (50 m x 100 cm) |
| 1 x | AIREX® M060 lámina (amarilla) 1200x550x4,0 mm (5 pcs) |
| 1 x | Plancha fibra vidrio 620x540x0,3 mm |
| 1 x | Fibra vidrio 163 g/m² 130cmx10m (Interglas 92105, aero, finish |
| 1 x | Fibra de vidrio 25 g (2 m²) |
| 1 x | Plancha ABS 500 x 400 x 1,5 mm (blanco) |
| 2 x | Rodillo teflon 40 mm x 15 mm Diam. |
| 1 x | Hoja de sandwich de fibra de carbono 350x150x3 mm |
| 2 x | Cinta fibra de vidrio 49 g/m2 5cm x 100m (plain weave) |
| 2 x | Peel Ply liso 100 g/m2 50 cm x 2 m |
| 2 x | Plancha termoformable 0,5 mm (0,02") DIN A4 |
| 1 x | Fibra carbono TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
| 1 x | Fibra carbono tela 245g/m2 127 cm x 10m |
| 1 x | Cinta de sellado al vacío, 2,5 x 12 mm (hasta 140 ° C) 15 m |
| 1 x | Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 2 x | Varilla carbono 0.5 mmx1000 mm |
| 1 x | Cinta de sellado al vacío, 2,5 x 12 mm (hasta 140 ° C) 22 rollos |
| 2 x | Peel Ply liso 95 g/m2 100 mm x 100 m |
| 1 x | Peel Ply liso 95 g/m2 20 mm x 100 m |
| 1 x | Plancha de goma espuma (310x210x3 mm) |
| 1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
| 1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
| 1 x | Fibra vidrio trenzada "manga" 45 mm x 10m |
| 1 x | Film perforado 100 cm / 20 m |
| 1 x | Release film 100 cm x 50 m |
| 1 x | Manta bolsa de vacio 150 gr/m2 Bobina 50m |
| 1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
| 1 x | Hoja Depron Aero 1250x800x3 mm |
| 1 x | Fibra vidrio 280 g/m2 (Twill weave) 50m x 1m |
| 1 x | Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl |
| 1 x | Plancha termoformable 0,1 mm (0,004") DIN A5 |
| 1 x | Plancha de goma espuma (310x210x8 mm) |
| 1 x | Fibra carbono tela No-cruzada ST 200g/m2 50 cm x 5 m |
| 1 x | Piloto 1/12 "Cougar" |
| 2 x | Piloto 1/7 "Japonés" |
| 3 x | Piloto "Anthony" (Slimline) |
| 1 x | Piloto jet 130 mm |
| 2 x | Piloto JAN 1/4 Veleros |
| 1 x | Piloto "Duke" Legends Series(Slimline) |
| 2 x | Piloto 1/4 "Heidi" |
| 1 x | Piloto 1/12 "Langley" |
| 1 x | Piloto WWII US Navy Pacific 12" Sclae 1/6-1/5 |
| 1 x | Piloto "Goose" (Slimline) |
| 2 x | Piloto civil "Joe" tamaño 9cm (Slimline) |
| 1 x | Piloto 1/6 "Cindy" |
| 1 x | Ferrita con funda |
| 1 x | Prisionero aluminio 3.5 mm Ø (4 uds) |
| 1 x | Prisionero 2 mm Ø (4 uds) |
| 1 x | PC-21 2.880 mm RED |
| 1 x | PC-21 2880 mm Propeller 5 blade 20x10 K45TP Scale composite |
| 1 x | PC-21 2.880 mm WHITE/RED |
| 2 x | Prisionero 3 mm Ø (4 uds) |
| 1 x | Interrruptor de encendido SPARK Switch 7.4v |
| 1 x | Conector AWG Macho 12 pines |
| 1 x | Conector alas/fuselaje para 12 pines AWG 20-22 |
| 1 x | Conector Sub-D 2+5 Hembra |
| 2 x | Plancha carbono 350x150x1.0 mm |
| 1 x | Interruptor SWTU2 |
| 1 x | Switch electronico SXH HV |
| 1 x | Conector AWG Macho 10 pines |
| 1 x | Hacker X-Pro USB interface V2 |
| 1 x | Interruptor electronico RC 30 Amp |
| 1 x | Conectores para alas del Fox MDM1 |
| 1 x | Interruptor OPTO Gas Engine |
| 1 x | PowerBox SparkSwitch RS |
| 2 x | Plancha estireno 320x120x1.0 mm |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 10 m |
| 1 x | Plancha carbono 700x550x0,5 mm |
| 1 x | Fibra vidrio 160 g/m2 "twill weave" (20 m x 1 m) |
| 1 x | Bolsa vacio 1200 mm x 50 m |
| 1 x | Peel Ply liso 64 g/m2 150 cm x 10 m |
| 1 x | SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm |
| 1 x | Fibra carbono tela 160g/m2 127 cm x 1 m |
| 1 x | Plancha carbono 350x150x1.5 mm |
| 1 x | Fibra de vidrio 80 g/m² (5 m x 100 cm) |
| 1 x | Fibra de vidrio 80 g/m² (3 m x 100 cm) |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
| 1 x | Fibra carbono tela 245g/m2 125 cm x 20 m |
| 1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
| 1 x | Fibra vidrio trenzada "manga" 45 mm x 20m |
| 1 x | Servo GO-1017MG 4.5 kg.cm 0.10s/60º |
| 1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
| 1 x | Servo GO-1070MG 40 kg.cm 0.10s/60º |
| 1 x | PET film Mylar® A 350, 50 cm, roll/ 5 m |
| 1 x | Cinta fibra de vidrio 225g / m² (Silane, liso) 40 mm, 100m |
| 1 x | Servo GO-1023MG 7.0 kg.cm 0.09s/60º |
| 1 x | Adaptador 2,3 mm M5 para cono 30 mm hélice fija. |
| 1 x | Motor Mega AC 16/25/04 COMBAT |
| 1 x | Motor Mega AC 16/25/02 |
| 1 x | PC-21 XXL 3.395 mm |
| 1 x | PC-21 2880 mm Tren aterrizaje electrico(Electron Retracts |
| 1 x | AXI 2204 Multicopter |
| 1 x | Tren electrico retractil FELIX SportJet 2.200 |
| 1 x | Freno de rueda para ruedas de 140 mm de diámetro |
| 1 x | Tren retráctil veleros 8-16 Kg 2.5-3.2 (rueda 140 mm con freno) |
| 1 x | Correa JETI DS |
| 1 x | DUPLEX 2,4EX Expander E2 |
| 1 x | DUPLEX 2.4EX Central Box 320 |
| 1 x | Brazo servo Aluminio 25T M3 KAVAN 6.5 / 19.6 mm |
| 1 x | Servo GO-12S70MG 20.5kg.cm 0.06s/60º |
| 1 x | Servo GO-1073MGW 32 kg.cm 0.135s/60º |
| 1 x | Hélice Falcon 20,5x14,5 eléctrica V2 (40 g) |
| 1 x | Hélice Falcon 21x14 eléctrica en carbono (64 g) |
| 1 x | Escape Pitts D.A. 70 |
| 1 x | Ferrita 14x8x5.5 mm |
| 1 x | Cruceta Rotor (3 palas) |
| 1 x | Motor Mega AC 22/30/02 |
 |
| 26,031.86EUR |
