| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | Pine wood slat 5.0x5.0x1000 mm |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | Liston HAYA 3 x 10 x 1000 mm |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
| 1 x | Shirt Hispano Aviación |
| 1 x | Softshell Hispano Aviación |
| 1 x | Bungee HLG Premium |
| 1 x | Vasa model Catapult |
| 1 x | Spring lock washer 3.1 mm (20 pcs) |
| 1 x | Aluminium cap bolt washer M3 black (8 pcs) |
| 1 x | Lock washer 2.2 mm (20 pcs) |
| 1 x | Aluminium wide washer M4 Red (4 pcs) |
| 1 x | Flat washer 1.7 mm (20 pcs) |
| 1 x | Flat washer 2.7 mm (20 uds)pcs) |
| 2 x | Flat washer 3.2 mm (20 pcs) |
| 2 x | Quicklock washer 2 mm (10 pcs) |
| 1 x | Lock washer 4.3 mm (20 pcs) |
| 2 x | Aluminium wide washer M3 red (4 pcs) |
| 1 x | Aluminium wide washer M4 Gold (4 pcs) |
| 1 x | Flat washer 4.3 mm (20 pcs) |
| 1 x | Aluminium wide washer M4 Blue (4 pcs) |
| 2 x | Lock washer 3.2 mm (20 pcs) |
| 2 x | M3-M4 rubber washer (8 pcs) |
| 1 x | Circlik for shaft 2.3 mm (10 pcs) |
| 1 x | Carbon fiber rod 4.0 mmx1000 mm |
| 1 x | 10m servo "Premium" wire (white/red/blue) |
| 1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
| 1 x | Extension MPX-MPX 20 cm |
| 1 x | Straightened rod Ø 1.0 mm x 1000 mm |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | Gold antispark 5,5 mm plug |
| 1 x | XH female balance (5S) connector (2 pcs) |
| 1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
| 1 x | 30 cm BEC cable (female) |
| 1 x | BALSA triangular 10x10x1000 mm |
| 1 x | Servo JETI DSHV 3D13T (13 Kg) |
| 1 x | Soporte servo KST X10 mini / DS135MG |
| 1 x | Servo FUTABA HPS-A700 Digital S-Bus |
| 1 x | 10-15mm Servo Arm |
| 1 x | POWERBOX Magic Jeti Switch |
| 1 x | Carbon plate 350x150x1.0 mm |
| 2 x | Blue aluminium servo arm V1-Hitec 20 mm M2 |
| 1 x | aluminium servo arm V2-JR 2,0 inch M3 |
| 1 x | BALSA triangular 6x6x1000 mm |
| 1 x | Spring lock washer 2.6 mm (20 pcs) |
| 1 x | Socket Screw M2x3 mm (4 pcs) |
| 1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
| 2 x | Aluminum Bayonet / strongal D25 mm / 1 m |
| 1 x | Propeller POWER-PROP 7x7 |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
| 1 x | ABS tube 6.0x5.0x1000 mm |
| 2 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm) |
| 2 x | ABS tube 16.0x14.0x1000 mm |
| 1 x | Fiberglass tube 6/4x1000mm |
| 1 x | ABS tube 8.0x6.0x1000 mm |
| 2 x | ABS tube 5.0x4.0x156 mm |
| 2 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
| 1 x | ABS tube 5.0x4.0x1000 mm |
| 1 x | ABS tube 6.0x4.0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
| 1 x | ABS tube 8.0x7.0x1000 mm |
| 2 x | ABS tube 3.0x1.0x1000 mm |
| 2 x | DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | LightBox SR |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 2 x | White smoke canister 65 g |
| 2 x | Green smoke canister 140 g |
| 1 x | Cabel "Y" 15 cm |
| 2 x | AX-60 starters (5 pcs) |
| 2 x | Blue smoke canister 140 g |
| 2 x | Yellow smoke canister 65 g |
| 1 x | Extension 15 cm (Futaba) |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | Carbon roving DowAksa / 24k / 1600 tex |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | Grafas ARF 3.0 m (Top Model) |
| 2 x | Blind nut M5 (10 pcs) |
| 1 x | Threaded insert M3 (4 pcs) |
| 1 x | Screw M3x8(10 pcs) |
| 1 x | Lock nut M5 (10 pcs) |
| 2 x | Screw M3x30 (10 pcs) |
| 1 x | Screw M4x12 (10 pcs) |
| 1 x | Blind nut M3 (4 pcs) |
| 2 x | Quicklock washer 1.5 mm (10 pcs) |
| 1 x | Spring lock washer 4.1 mm (20 pcs) |
| 1 x | Socket Screw M3x9 mm |
| 2 x | Treaded hexagonal socket insert M3 Br (4 pcs) |
| 1 x | Nut for mounting M3 (10 pcs) |
| 1 x | Blind nut M4 (10 pcs) |
| 2 x | Screw M2x6 (10 pcs) |
| 1 x | Hexagonal Nut M3 (10 pcs) |
| 1 x | LA500 ciclic lever |
| 1 x | LA500 rotor head shaft |
| 1 x | Head spacer |
| 1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
| 1 x | aluminium servo arm V1-JR 1,0 inch M2 |
| 1 x | Gold aluminium servo arm V2-JR 1,0" inch M3 |
| 2 x | Red aluminium servo arm V2-Futaba 1,5" inch M3 |
| 1 x | Gold aluminium servo arm V1-JR 1,25" inch M3 |
| 1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
| 1 x | SAVOX SH 0254 servo |
| 1 x | Red aluminium servo arm V3-Futaba 3-3,5inch |
| 1 x | Blue aluminium servo arm V2-Hitec 1,5 inch M3 |
| 1 x | Battery plate |
| 1 x | Bearing 3x6x2,5 |
| 1 x | Cierva C30 simulated motor |
| 1 x | Cierva C30 Elevator |
| 1 x | Cierva C30 Body Spain |
| 1 x | Baal link 4/14/4 (5 pcs) |
| 1 x | Blade holder lower |
| 1 x | LA500 Blades |
| 1 x | Cierva C30 spanish decoration Stickers |
| 1 x | Bearing housing |
| 1 x | Head core bushing |
| 1 x | Head core |
| 1 x | Blade holder center |
| 1 x | Ball joint long |
| 1 x | Autogyro Cierva C30 Spain |
| 1 x | LA500 housing-upper cyclic |
| 1 x | LA500 pre-rotation gear |
| 1 x | LA500 front gear holder |
| 1 x | Blade holder upper |
| 1 x | LA500 pre-rotation gear hub |
| 1 x | Balls 4 mm |
| 1 x | LA500 freewheel bearing |
| 1 x | LA500 cyclic central part |
| 1 x | Head runner |
| 1 x | LA500 rotor head core |
| 1 x | Baering 3x8x4 |
| 1 x | Blade holder center GFK 0,5 mm |
| 1 x | Servo BLS-M55B 61.2kg |
| 2 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
| 1 x | Gold aluminium servo arm V2-JR 1,25" inch M3 |
| 1 x | Rudder 2_Tray 3.5~4 inch |
| 1 x | Red aluminium servo arm V3-Futaba 1,0inch |
| 1 x | Red aluminium double servo arm FUTABA 40 mm M3 F3A |
| 2 x | Gold aluminium servo arm V2-JR 1,5" inch M3 |
| 1 x | Blue aluminium servo arm V3-Hitec 1,5inch M3 |
| 1 x | Blue aluminium servo arm V2-Hitec 1,0 inch M3 |
| 1 x | Blue aluminium servo arm V2-Hitec 1,25 inch M3 |
| 1 x | Blue aluminium servo arm V2-Hitec 2,0 inch M3 |
| 2 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
| 1 x | Red aluminium servo arm V2-Futaba 1,25" inch M3 |
| 1 x | Red aluminium servo arm V3-Futaba 3,5inch |
| 1 x | Red aluminium servo arm V2-Futaba 1,0" inch M3 |
| 1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
| 1 x | Rudder 2_Tray 4.5~5 inch |
| 1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
| 1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
| 1 x | Blue aluminium servo arm V1-Hitec 1,5" inch M3 |
| 1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
| 1 x | Blue aluminium servo arm V2-Hitec 1,75" inch M3 |
| 1 x | Cable S.BUS 3 salidas 100 mm |
| 1 x | Gyro 3-Ejes REFLEX V2 FMS |
| 2 x | Smoke set "S" |
| 2 x | Red smoke bombs AX-60 (5 pcs) |
| 1 x | Propeller 8x4,3 SlowFlyer |
| 1 x | Propeller electric carbon 10.5x6 |
| 1 x | Propeller POWER-PROP 15x8 |
| 1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
| 1 x | ABS tube 9.0x7.0x1000 mm |
| 1 x | ABS tube 5.0x3.0x1000 mm |
| 1 x | ABS tube 7.0x5.0x1000 mm |
| 2 x | DUPLEX 2.4EX Central Box 320 |
| 1 x | Green smoke canister 100 g |
| 1 x | Fiberglass plate 350x150x1.0 mm |
| 1 x | Fiberglass plate 620x540x3,2 mm |
| 1 x | "L" servo arm 65x49 mm (2 pcs) |
| 1 x | Carbon plate 700x550x0.5 mm |
| 1 x | Soporte servo KST X08/H and Plus |
| 1 x | Socket Head Screw M2x5 |
| 1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
| 1 x | Spring pin Ø 1 x 6 mm (10 pcs) |
| 1 x | Hexagonal Nut M2 (10 pcs) |
| 1 x | 15 mm floating pad (30 pcs) |
| 1 x | PT 21x13 EL Propeller 3 Blade |
| 1 x | Cooler motor type 300 |
| 1 x | Cooler motor type 150 |
| 1 x | PT 21x13 EL Propeller |
| 1 x | Propeller electric carbon 9.5x7 |
| 1 x | Propeller electric carbon 6.5x4 |
| 1 x | Propeller POWER-PROP 12x8 |
| 1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
| 1 x | ABS tube 9.0x8.0x1000 mm |
| 1 x | ABS tube 12.0x10.0x1000 mm |
| 1 x | ABS tube 3.0x2.0x330 mm |
| 1 x | ABS tube 7.0x6.0x1000 mm |
| 1 x | ABS tube 4.0x2.0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
| 1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | DUPLEX 2.4EX Central Box 210 |
| 1 x | Ventral support for AX-18/AX-60 |
| 1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
| 1 x | White smoke bombs AX-60 (5 pcs) |
| 1 x | Yellow smoke canister 100 g |
| 1 x | Parachutist |
| 1 x | B4-0 rocket charges (6 pcs) |
| 1 x | White smoke canister 140 g |
| 1 x | PCARD Wireless System |
| 1 x | Electric rocket starters (6 pcs) |
| 1 x | Plastic caps for AIR BURTS (30 pcs) |
 |
| 8,582.70EUR |
