1 x | Servo Arm aluminium ALU-STAR |
1 x | Ballast 700gr OPALE |
1 x | PPS-4D Propeller |
1 x | Blade holder metal LAMA |
1 x | Coversion set HIROBO EX/EAGLE elektro |
1 x | Glases Nimbus |
1 x | JR silicone servo wire 0,35 qmm / 5m |
1 x | 30 cm BEC cable (male) |
1 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
1 x | Red smoke canister 140 g |
1 x | Small pinned hinge (12 uds) |
2 x | Red smoke bombs AX-60 (5 pcs) |
1 x | MPX-Dean "T" Adapter |
1 x | Quicklock washer 4 mm (10 pcs) |
1 x | White silicone 0,25 mm² wire (25 m) |
1 x | Blades 330mm |
1 x | White smoke bombs AX-9 (10 pcs) |
2 x | CC 03 |
1 x | Miniature brass strap hinge, 1 m |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Spring lock washer 4.1 mm (20 pcs) |
1 x | Optical RPM Sensor |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | CC 05 |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Circlik for shaft 1.2 mm (10 pcs) |
1 x | Flap hinge (6 pcs) |
1 x | Parachute expulsion foam |
1 x | Lock washer 2.2 mm (20 pcs) |
2 x | Yellow smoke canister 100 g |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | Stickers-digit for marking |
1 x | White silicone 0,25 qmm wire (100 m) |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Green smoke canister 100 g |
1 x | Blue smoke canister 140 g |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | Blue smoke canister 100 g |
1 x | White silicone 0,25 qmm wire (150 m) |
1 x | Parachutist |
1 x | Aluminium wide washer M4 Black (4 pcs) |
2 x | Ventral support for AX-18/AX-60 |
2 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | M3-M4 rubber washer (8 pcs) |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
2 x | "S" set for boats |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Suncover 100cc Red |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
1 x | Cabel charger transmitter GRAUPNER |
1 x | 5 line servos wire black (1 m) |
2 x | Lock washer 2.7 mm (20 pcs) |
1 x | Cable with accesories |
2 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
2 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Cut tube |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | 1/6 Pilot "John" |
2 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | 1/12 Pilot "Fighter" |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | Pilot "Dick" Legends Series (Slimline) |
1 x | USB Mini Camera endoscope |
1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | 120x60 mm SLH KOVO wheel |
1 x | White smoke bombs AX-60 (5 pcs) |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
2 x | Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR) |
1 x | Shaft sleeve LAMA |
1 x | Remote electric ignition system |
1 x | Initior Receiver FRX2 Wireless |
1 x | White smoke canister 140 g |
1 x | B4-0 rocket charges (6 pcs) |
1 x | Small pinned hinge (6 uds) |
1 x | TrainerCord (master-learner) |
1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
1 x | ESC RAY G2 R-60SB SBEC |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | Brushless ESC 30A F-450 |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Pan Head Screw M2x8 PH |
1 x | Hexagonal Nut M3 (10 pcs) |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Propeller drill jig DA 100/85/120/150/200 and VM 60-210 |
1 x | Heat Seal Iron |
1 x | Propeller diller for DLE170 |
1 x | Latex Gloves GRIP, size L, box/ 100 pcs |
1 x | Mold plugs XT-30 |
1 x | Kwik link unmount tool |
1 x | Propeller diller for DLE111 and DA85-150 |
1 x | Mini Lock Grips 2PCS |
1 x | Handle for PERMAGRIT lime |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg |
1 x | Small flex hinge (12 uds) |
1 x | Gold aluminium servo arm V1-JR 1,25" inch M3 |
1 x | 3 LiPo XH>EH adapter |
1 x | 4 LiPo XH>EH adapter |
1 x | Blue aluminium servo arm V3-Hitec 1,25inch M3 |
1 x | JIVE 100+LV Esc |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
1 x | Red aluminium double servo arm FUTABA 40 mm M3 F3A |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | KOBY 40 LV Esc |
1 x | Medium pin type hinge (12 uds) |
1 x | Silicone red 2,5 qmm wire ( 25 m) |
1 x | JIVE 80+HV Esc |
1 x | Red aluminium servo arm V2-Futaba 1,25" inch M3 |
1 x | Blue aluminium double servo arm HITEC 2,5 inch M3 |
1 x | Connector Sub-D 2+5 Female |
1 x | KOLIBRI 140 LV Esc |
1 x | Female connector for 6 pines AWG |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 4 cell |
1 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
1 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | ESC PULSAR A-40 |
1 x | Esc KOSMIK 210 HV-I COOL |
1 x | KOBY 90 LV Esc |
1 x | USB interface ALTIS |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell |
1 x | Red aluminium servo arm V2-Futaba 17 mm iM2 |
1 x | CC 02 |
1 x | Red aluminium double servo arm FUTABA 2,5inch M3 |
1 x | Pin hinge 39x20 mm (10 uds) |
1 x | Silicone red 0,75 qmm wire ( 1 m) |
1 x | Double aluminium servo arm V1-Futaba 2,5 inch M3 (red) |
1 x | Lock washer 4.3 mm (20 pcs) |
1 x | Quicklock washer 2 mm (10 pcs) |
1 x | Socket Screw M2x3 mm (4 pcs) |
1 x | Screw M2x6 (10 pcs) |
1 x | Pan Head Screw M2x8 PH countersunk head |
1 x | Tapping Screw M2.2x13 (10 pcs) |
1 x | Regulador Jeti Jes 045 |
1 x | Quicklock washer 1 mm (10 pcs) |
1 x | VIPER JET 2.2m + Electric landig Gear Deco: 01 Red-Blac-kWhit |
1 x | M3 black washers (4 pcs) |
1 x | |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | 3,0x60 mm allen screwdriver |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Fresa corte diamante Ø 2.3mm (bola) |
1 x | Schul-Malpinsel Gr.5 |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | BALSA trip 10x10x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
1 x | 45 mm white plastic spinner for fixed propeller / 4,0 mm axi |
1 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL |
1 x | 3.2 mm Prop Adapter M6 |
1 x | Prop Shaft Adapter 5 mm/M8 "long" |
1 x | Spinner 82mm Black ventilado |
1 x | MPX 8 pins plug mold |
1 x | Hot Glue Stick BLACK |
1 x | Laminating brush 10 mm, pack/ 50 pcs |
1 x | PERMAGRIT Sanding Block 45° 140x51 mm |
1 x | Hot Glue Stick GREEN |
1 x | Mold plugs XT-90 |
1 x | Precision wrench L100 mm |
1 x | Heli blades angle measurer |
1 x | PROXXON - DRILL SET 0,5-3,2MM (10PCS.) |
1 x | Heli blades angle measurer |
1 x | Pistola termica MH 550 micro |
1 x | Fresa corte diamante Ø 2.7mm (bola) |
1 x | Propeller drill jig DA-35/50/60/70 |
1 x | Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5 |
1 x | Goma arrancador Ø36 mm x 30 mm |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
1 x | Propeller diller 5/6,3/8/9 |
1 x | Propeller diller for EME35 and DLE35 |
1 x | Mini Infrared Thermomiter |
1 x | MPX plug mold V1 |
1 x | Llave dinamomterica 74 Z 0 0 21 |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Hot Glue Stick RED |
1 x | Modelling compound (Plastilin), sculptor's quality 1 Kg |
1 x | Bidule 55 V3 2460 mm |
1 x | Bidule 170 ARF 3.48 m |
1 x | Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg |
1 x | resin-hardener package L-385 with hardener H-385 |
1 x | Hardener Aero EPH 161 (250 g) |
1 x | Epoxy Resin L (2.5 Kg) |
1 x | Actuador lineal HLS12-100210-7.4v |
1 x | Spinner INO 75 mm Chrome (Imitacion metal) |
1 x | Spinner INOVA 63 mm White |
1 x | 3,2 mm Prop Adapter M8 |
1 x | Aero-Master (Aero-naut) |
1 x | 5 mm Prop Adapter M6 |
1 x | F3A carbon 82 mm spinner for 12 mm axis |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | Motor mount class 48" |
|
11,642.92EUR |