| 1 x | Rescue 1,8m2 / BackPack |
| 2 x | Para-RC Trike "RC-Bullix" |
| 1 x | Windsock Ozone L -1200 mm |
| 1 x | Aramid 50 daN 50 m |
| 1 x | Paramotor BackPack XXS 2 |
| 1 x | Paramotor BackPack XXS (without accessories) |
| 1 x | Cinta Goldfix 1m |
| 1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
| 1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
| 1 x | SE Ring 300 mm (2 pcs) |
| 1 x | 20x200 mm battery rings |
| 1 x | Tape GFK 25 mm |
| 2 x | SE Ring 200 mm (2 pcs) |
| 1 x | SE Ring HACKER 300 mm (2 pcs) |
| 1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | Foil for sticking flaps and ailerons |
| 1 x | Marker ties (20 pcs) |
| 1 x | Spikes Band (5 m) |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | SE Ring 480 mm (2 pcs) |
| 1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
| 2 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
| 1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
| 1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
| 1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
| 1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
| 1 x | Circlick securite |
| 1 x | Small Crow DLE-170M |
| 1 x | Power supply NT 25 Amp. |
| 1 x | DPSI magnetic switch actuator (housing) |
| 1 x | Support conector MPX (6 pcs) |
| 1 x | Aro pasacable Ø25 mm (4 pcs) |
| 1 x | Sun Cover PC 21 XXL (JMB Jets) |
| 1 x | Ballast 700gr OPALE |
| 2 x | Paramotor Trike XL |
| 1 x | Parachute PV6 for F3J |
| 2 x | LUCAS pilot ARTF |
| 1 x | Opale Rucksack |
| 1 x | Trike XL motor set (motor+esc+prop) |
| 1 x | Parachute P4 |
| 2 x | Wing OXY 5,0 m2 |
| 1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
| 1 x | Jeti Box mini |
| 1 x | Regulador Jeti Jes 045 |
| 1 x | Extension silicon 25 cm (Graupner) |
| 1 x | Extension silicon 75 cm (Graupner) |
| 1 x | Extension silicon 50 cm (Graupner) |
| 1 x | Xplorer3 anemometro |
| 1 x | Aramid fibre shears Proton®, 21 cm / 8" length |
| 1 x | Copier 5x20 cm pcs |
| 2 x | Fresa corte diamante Ø 1.0mm (bola) |
| 2 x | Fresa corte diamante Ø 1.4mm (bola) |
| 1 x | Battery RX JETI LiIon RB 6200 7.2v |
| 1 x | SE Ring 240 mm (2 pcs) |
| 1 x | SE Ring 450 mm (2 pcs) |
| 1 x | Waterproof adhesive tape, width 19mm, length 25m |
| 1 x | SE Ring 360 mm (2 pcs) |
| 1 x | |
| 1 x | TMM 1210-3S heli |
| 1 x | Xplorer1 anemometro |
| 1 x | Cap Hispano Aviación |
| 1 x | Shirt Hispano Aviación |
| 1 x | Vest clothes Hispano Aviación |
| 1 x | Thixotropic agent tin/ 15 g (approx. 350ml) |
| 1 x | Cotton Flocks, bag/ 7 Kg |
| 1 x | Thixotropic agent TM 100, tin/ 415 g (approx. 5 l) |
| 2 x | Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l) |
| 1 x | Heat-conducting adhesive (2x2ml), WLK DK 4 |
| 1 x | 30 mm Alu spinner 3 mm pleg. propeller |
| 1 x | MAX pilot ARTF |
| 1 x | Propeller electric carbon 10.5x6 |
| 1 x | Extra Hard Titanium Herxagon Screwdrivers |
| 1 x | DEMON CORTEXpro |
| 1 x | ALBATROS 3.0 m (orange/white) |
| 1 x | 18 mm wing servo holder |
| 1 x | 20 mm tail wheel for 0,5-1 Kg models |
| 1 x | 90x60 mm standart servo cover |
| 1 x | Bidule 111 3000 mm |
| 1 x | Albatros ,spare fuselage (Top Model) |
| 1 x | Avia (Top Model) |
| 1 x | 57 mm micro-mini servo cover |
| 1 x | Bidule 55 V3 2460 mm |
| 1 x | 8x6 tree blades propeller |
| 1 x | 6x4 tree blades propeller |
| 1 x | Propeller electric carbon 6.5x4 |
| 1 x | Propeller electric carbon 9.5x7 |
| 1 x | CORTEX |
| 1 x | Kontronik ProgUnit |
| 1 x | Landing gear Rocket 400 |
| 1 x | Soldering tip for KAVAN soldering iron KAV66.8338 |
| 1 x | Sub-D Plug Mold |
| 1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
| 1 x | Starter Sullivan-STAR 603 DINATRON |
| 1 x | Sealing Iron Sleeve STD |
| 1 x | Hot Glue Stick RED |
| 1 x | Mini-handed clamp |
| 1 x | Rudder 2_Tray 3~3.5 inch |
| 1 x | Propeller MEJLIK 18x8 CFK |
| 1 x | TMM 2512-3S heli |
| 1 x | Mini-Pix Esc 15 Amp |
| 1 x | 15x7 tree blades propeller |
| 1 x | Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs) |
| 1 x | Tool for entel |
| 1 x | Vacuum pump P1-N |
| 1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
| 1 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
| 1 x | Tube bender |
| 1 x | Tachometer HANGAR 9 digital |
| 1 x | silverlot 45% - 1,50x500 mm solder rods (2 pcs) |
| 1 x | Spare round blades, 28 mm, pack/ 2 pcs. |
| 1 x | Starter 12v (Max 180 and 30ccm) |
| 1 x | Tool for entel |
| 1 x | Steel brush wheel with 2.35mm |
| 1 x | Starter EM Gear Power 250 |
| 1 x | Smart Soldering Iron 110W/230V AC |
| 1 x | Sealing Iron Sleeve PROF |
| 1 x | Vacuum pump 12 CFM |
| 1 x | Welder 100W/200V |
| 1 x | XT-60 Plug Mold |
| 1 x | |
| 1 x | Dust collector for mould cleaning |
| 1 x | PROXXON - DRILL SET 0,5-3,2MM (10PCS.) |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
| 1 x | 3,0x60 mm allen screwdriver |
| 1 x | 25 mm Sandpaper file |
| 1 x | 22 mm Cut Disc Proxxon/Dremmel |
| 1 x | Fresa corte diamante Ø 2.35mm (flame) |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
| 1 x | Hot Glue Stick BLACK |
| 1 x | 2,5x60 mm allen screwdriver |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
| 1 x | Goma arrancador Ø36 mm x 30 mm |
| 1 x | Fresa corte diamante Ø 2.3mm (bola) |
| 1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
| 1 x | Aluminium cap bolt washer M3 green (8 pcs) |
| 1 x | Aluminium wide washer M3 gold (4 pcs) |
| 1 x | Blue aluminium servo arm V1-Hitec 20 mm M2 |
| 1 x | LASER 73" 1.85m (05) PILOT |
| 1 x | Cargador para AA/AAA Ni-MH & Ni-Cd |
| 1 x | FOAM - CURE™ (24g) |
| 1 x | Thixotropic agent TM 100, tin/ 75 g (approx. 1 l) |
| 1 x | Propeller Pleg CAM-Prop 10x6 + Spinner |
 |
| 12,719.15EUR |
