| 1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
| 1 x | ABS tube 18.0x16.0x1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
| 1 x | ABS tube 9.0x8.0x1000 mm |
| 1 x | ABS tube 3.0x1.0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
| 1 x | ABS tube 10.0x8.0x1000 mm |
| 1 x | ABS tube 16.0x14.0x1000 mm |
| 1 x | ABS tube 12.0x10.0x1000 mm |
| 1 x | ABS tube 14.0x10.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
| 1 x | ABS tube 8.0x7.0x1000 mm |
| 1 x | ABS tube 6.0x5.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
| 2 x | ABS tube 3.0x2.0x1000 mm |
| 1 x | ABS tube 6.0x4.0x1000 mm |
| 1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
| 1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
| 1 x | ABS tube 7.0x6.0x1000 mm |
| 1 x | ABS tube 2.0x1.0x1000 mm |
| 1 x | ABS tube 3.0x2.0x330 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | ABS tube 5.0x4.0x1000 mm |
| 1 x | ABS tube 4.0x2.0x1000 mm |
| 3 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 2 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 2 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 2 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 2 x | Cabin latch Fox MDM1 4m (pair) |
| 2 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 2 x | SUS wire 3m (nylon coated) |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 2 x | Steering arm 16 mm Ø 3 mm |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 2 x | Screw-lock connector M2 (2 uds) |
| 2 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 2 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Covered closure or fairings |
| 2 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Canopy Latch |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 2 x | Cierre cabina aluminio Ø4, I=10 mm |
| 2 x | Locking cable tie 2.5x100 (uds) |
| 3 x | Canopy Lock V1 M3 Red (2 pcs) |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 2 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 2 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
| 2 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
| 1 x | Ball link Aluminio M3 (2 pcs) |
| 1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
| 1 x | Kwik link AL M3 con Clip (2 pcs) |
| 1 x | Ball Link ALU M3 - RH (1 pcs) |
| 1 x | Threaded coupler M3 (10 uds) |
| 1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
| 1 x | Ball link duraluminium M3 V1 (10 pcs) |
| 1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
| 2 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
| 2 x | Ball link V1 Ø7 M4/3 (6 uds) |
| 1 x | Threaded coupler M2 (10 uds) |
| 1 x | Angled clevis with threaded rod M3 |
| 1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
| 2 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
| 1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
| 1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
| 1 x | Z type of cable coupler Ø 2 (2 uds) |
| 1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
| 1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
| 1 x | A/C economy plywood 600x300x6+.0 mm |
| 1 x | 6 mm M3 variable inclined horn |
| 1 x | 55% silver electrodes (2 pcs) |
| 1 x | Carbon fiber rod 8.0 mmx1000 mm |
| 1 x | Support FUEL DOT V3 |
| 1 x | Support XT60 conector (2 pcs) |
| 1 x | ABS tube 9.0x7.0x1000 mm |
| 2 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | Tip wing protector 30x10 (2 pcs) |
| 2 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
| 2 x | 28x5 mm wires output (2 pcs) |
| 1 x | 38x4,5 mm wires output (2 pcs) |
| 2 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
| 2 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
| 1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
| 1 x | Allen wheel collar M4x4 |
| 1 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
| 1 x | Clip fixing for wing (2 pcs) |
| 1 x | 45 mm rods set for direction control |
| 1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
| 1 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 2 x | Split pin 1x8 mm (10 uds) |
| 2 x | Window mounting channel Type H 2.5x0.5 (2 m) |
| 1 x | Snap pin for micro clevis (10 uds) |
| 1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | Triple rod con. 2mm Pushrod (2 pcs) |
| 1 x | Wheel collar 3.5 mm Ø (4 uds) |
| 1 x | Split pin 1.6x16 mm (10 uds) |
| 1 x | Split M1,2x10 (10 pcs) |
| 1 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 2 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
| 1 x | Cockpit plastic closing |
| 1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
| 1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
| 1 x | ABS tube 20.0x18.0x1000 mm |
| 2 x | Landing lights 18 mm (0.71in) |
| 2 x | Cover cap drop-shaped paintable 43 mm |
| 2 x | Resistor 3W 5% 2R2 |
| 1 x | Carbon plate 350x150x3.0 mm |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Extractor piñones 2.3/3.2 mm |
| 1 x | One touch canopy lock |
| 1 x | Ferrita 14x8x5.5 mm |
| 1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
| 1 x | Ferrita 17x10x6.5 mm |
| 1 x | Motor ACTRO 35-4-790 |
| 1 x | Pulley brass 5/1,5 (2 pcs) |
| 1 x | Catalog AERO-NAUT 2016 |
| 1 x | wire tensioner (blue) |
| 2 x | Turnbuckle M2,5x32/48 (2pcs) |
| 1 x | Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs) |
| 3 x | Cable coupler M2 (10 uds) |
| 1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
| 1 x | Rigid coupling brass Ø 3 mm L: 20 mm |
| 1 x | Threaded coupler M2,5 (10 pcs) |
| 1 x | Robbe Modellsport ROOKIE 35 ESC FOR BRUSH MO TORS |
| 1 x | Anchor of tow Met. 60 mm |
| 2 x | Turnbuckle M1,6x17/27 (2pcs) |
| 1 x | |
| 1 x | Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
| 1 x | Buy Perforated film 100 cm / 50 m |
| 2 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
| 1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
| 1 x | Pushrod greyline 4/3 with coupler M3 |
| 2 x | Wire easy tensioner (silver) |
| 1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
| 1 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
| 1 x | 140 mm rods + T patellas set for direction control |
| 1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
| 1 x | 140 mm rods set for direction control |
| 1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
| 2 x | Wing bolts M3 Steel screw Red (2 pcs) |
| 1 x | Window mounting channel 5m |
| 1 x | 90 mm rods + T patellas set for direction control |
| 1 x | Combo lighting module with covering drop shape |
| 1 x | 100 mm rods set for direction control |
| 3 x | Pulley brass 2,5/1 (2 pcs) |
| 2 x | Stainless steel 3 m Pull-Pull complet set (max 20 kg) |
| 1 x | Pulley brass 16/2 (2 pcs) |
| 1 x | Stainless steel 4 m Pull-Pull complet set (max 20 kg) |
| 2 x | BRASS CONTROL HORN M3x16 mm 2pcs |
| 2 x | Turnbuckle M3 33x49 (2pcs) |
| 2 x | Pulley brass 8/2 (2 pcs) |
| 1 x | wire tensioner (black) |
| 3 x | Pulley brass 4/1,5 (2 pcs) |
| 1 x | Blue smoke canister 100 g |
| 1 x | Yellow smoke canister 100 g |
| 1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
| 1 x | Micro clevis (10 uds) |
| 2 x | Porta Kwik link M4 3 mm (2 pcs) |
| 1 x | Kwik link with arm M3xM2xL24 |
| 1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
| 1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Buy Perforated film 145 cm / 50 m |
| 1 x | 4 mm M3 red control terminal (4 pcs) |
| 1 x | Turnbuckle M2x29/43 (2pcs) |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
| 1 x | Cable coupler M2x66 (2 uds) |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | Resistor 3W 5% OR47 |
| 1 x | Combo lighting module with covering drop shape |
| 1 x | Resistor 3W 5% OR82 |
| 1 x | Heat sink for Optotronix LEDs |
| 1 x | LED lighting system High Power |
| 1 x | White smoke canister 65 g |
| 1 x | Yellow smoke canister 65 g |
| 1 x | Canopy Astra |
| 1 x | Electric spoiler 440 mm (2 pcs) |
| 1 x | Electric spoiler 185 mm (2 pcs) |
| 1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | Cable Cargador FUTABA |
| 1 x | 3 LiPo XH>EH adapter |
| 1 x | Cabel "Y" 30 cm (graupner) |
| 1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
| 1 x | Pulley brass 2,5/1 (2 pcs) |
| 1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
| 1 x | Coupling for 4 mm axis |
| 1 x | Threaded coupler M2 (10 pcs) |
| 1 x | Straightened rod Ø 14.0 mm x 1000 mm |
| 1 x | Turnbuckle M2,5x27/43 (2pcs) |
| 1 x | Round Rod 1.0x3.5 cm |
| 1 x | Turnbuckle M1,6x20/30 (2pcs) |
| 1 x | wire tensioner (silver) |
| 1 x | Turnbuckle M2x22/35 (2pcs) |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | 22x10 prop Super Silence |
| 1 x | 3-blades 20x10 carbon prop Super Silence |
| 1 x | 27x10 prop Super Silence |
| 1 x | Cable coupler M3 (10 uds) |
| 1 x | Cable coupler M3 (10 uds) |
| 1 x | 10 mm dogdrive props |
| 1 x | Carbon fiber rod 2.0 mmx1000 mm |
| 1 x | CA Glue fast 20g |
| 1 x | |
| 1 x | 3-blades 24x12 carbon prop Super Silence |
| 1 x | 3-blades 20x12 carbon prop Super Silence |
| 1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
| 1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
 |
| 4,396.29EUR |
