| 1 x | Cap Hispano Aviación |
| 1 x | Propeller POWER-PROP 13x9 Izda |
| 1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
| 1 x | DUPLEX 2.4EX Central Box 210 |
| 1 x | LASER 73" 1.85m (05) PILOT |
| 1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
| 2 x | Vest clothes Hispano Aviación |
| 1 x | Joint with bearing M3 22x5,5 |
| 1 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | Short ball link M3 (6 uds) |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | Fabric scissors curved Premium, 16 cm / 6" length |
| 1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
| 1 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 3 x | Straightened rod Ø 2.5 mm x 1000 mm |
| 2 x | BEC 3A FOXY |
| 1 x | 6,4x1000 mm 2:1 black termoretract tube |
| 1 x | ORACOVER Fluor red (2 m) |
| 1 x | ABS Strip 1.5x3.0x1000 mm |
| 1 x | |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Stickers-digit for marking |
| 1 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
| 1 x | Oracover CARBON Metalic 1 m |
| 1 x | ABS tube 3.0x1.0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
| 2 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
| 1 x | Straightened rod Ø 0.8 mm x 1000 mm |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | Straightened rod Ø 2.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 5.5 mm x 1000 mm |
| 1 x | 1/6 Pilot "Garry" |
| 1 x | ABS Strip 1.0x3.0x1000 mm |
| 1 x | 2,4x1000 mm 2:1 black termoretract tube |
| 1 x | 102 mm aluminium spinner |
| 2 x | ABS 500 x 400 x 2,0 mm (white) |
| 1 x | Carbon fibre sandwich sheet 350x150x3 mm |
| 2 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
| 1 x | ABS tube 16.0x14.0x1000 mm |
| 1 x | 102 mm INO spinner (carbon imitation) |
| 1 x | ABS tube 8.0x7.0x1000 mm |
| 1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
| 2 x | Brass rod Ø 0.5 mm x 1000 mm |
| 2 x | Double conector with JR adapter and 200 mm extension |
| 1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 2 x | "Taxi Tank" Fuel Tank |
| 1 x | Strip 1,5x1,5x330 mm |
| 2 x | Tube Pitot to PIXHAWK |
| 1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
| 1 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
| 1 x | 140 mm rods set for direction control |
| 1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
| 1 x | Ferrita 14x8x5.5 mm |
| 1 x | Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
| 1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
| 1 x | JR silicone servo wire 0,35 qmm / 5m |
| 1 x | Small pinned hinge (12 uds) |
| 1 x | 100m servo "Premium" wire (white/red/blue) |
| 1 x | Support XT60 conector (2 pcs) |
| 1 x | Tube support Ø 6mm (10 pcs) |
| 2 x | Support pumb/filter Xicoy X45 |
| 1 x | Pasacables rectangular 40x15 mm (4 pcs) |
| 1 x | Support conector MPX (6 pcs) |
| 2 x | DYNAMOMETER S-1580 |
| 1 x | 1804 2400KV Brushless Motor Qav 250 mini |
| 1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
| 1 x | Motor 2212 (1000KV) Quadcopter F450 |
| 1 x | Extension Arm for Carburetor (red) |
| 1 x | Suction funnel for carburetor 90D-M (red) |
| 1 x | Walbro carburetor for MVVS 26/30/35/40 cc |
| 1 x | LA500 nose |
| 1 x | Pilot LA 500 |
| 2 x | Blade Holder Full (3 blades) |
| 1 x | 3 blades set |
| 1 x | Blade Holder (3 blades) |
| 1 x | DLE 55 carburetor |
| 1 x | Hose clips 6 mm |
| 1 x | EME 55 cc carburetor WALBRO |
| 2 x | Tail tube RAINBOW |
| 1 x | Blind nut M4 (10 pcs) |
| 1 x | LOWER TOW HOOK |
| 1 x | SERVO HOLDER |
| 1 x | DPSI magnetic switch actuator (PCB) |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 1 x | Multi-adapter balancer JST/C - TP |
| 1 x | Cockpit plastic closing |
| 1 x | Opto Gas Engine Kill Switch |
| 1 x | Carbon plate 350x150x0.5 mm |
| 1 x | Carbon tube (L 1000 mm, Ø8 mm, Ø6 mm) |
| 1 x | Landing gear axle Ø 5 mm (2 uds) |
| 1 x | Landing gear axle Ø 6 mm (2 uds) |
| 1 x | V tail SILENT DREAM 2.200 mm (Elec or Glider) |
| 1 x | Crystal Universal RX 35.040 Ch 64 |
| 1 x | Crystal TX 35.180 Ch 78 |
| 1 x | Landing gear axle 4x21 4 mm (2 uds) |
| 1 x | Crystal Universal RX 35.150 Ch 75 |
| 1 x | ABS 500 x 400 x 0,5 mm (white) |
| 2 x | 3 LiPo XH>EH adapter |
| 1 x | Connector Sub-D 2+5 Male |
| 2 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 1 x | Straightened rod Ø 8.0 mm x 1000 mm |
| 1 x | 30 cm BEC cable (male) |
| 1 x | SPARK Switch 7.4v |
| 1 x | Cargador para AA/AAA Ni-MH & Ni-Cd |
| 1 x | Carbon plate 350x150x4.0 mm |
| 1 x | Carbon plate 350x150x2.5 mm |
| 1 x | Carburator Moki S250 |
| 1 x | 63 mm INO spinner (carbon imitation) |
| 1 x | Charger SKY RC D200 neo |
| 1 x | 41x5,5 mm wires output (2 pcs) |
| 1 x | wing/fuselage connector for 3 pines AWG 20-24 |
| 1 x | Cockpit aluminium closing 4.7g |
| 1 x | 43x14 mm hard foam KOVO wheel (2 pcs) |
| 1 x | SBEC 40 |
| 1 x | Carbon plate 350x150x3.0 mm |
| 1 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
| 1 x | Carburator Moki S400 |
| 1 x | Crystal Universal RX 35.170 Ch 77 |
| 1 x | Landing gear axle Ø 4 mm (2 uds) |
| 1 x | Styrene plate 320x120x1.0 mm |
| 1 x | Fiberglass plate 350x150x1.5 mm |
| 1 x | Motor mount EDGE 540 48" |
| 1 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
| 1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
| 1 x | Foam plastic plates (310x210x8 mm) |
| 1 x | Carbon roving DowAksa / 24k / 1600 tex |
| 1 x | Crystal TX 35.010 Ch 61 |
| 1 x | Transmitter Crystal 35 Mc/s Ch 62 |
| 2 x | Crystal TX 35.050 Ch 65 |
| 1 x | Sheet Depron Aero 1250x800x3 mm |
| 1 x | PVC grid diagonal 290x185x0.32 mm |
| 1 x | Fiberglass plate 350x150x1.0 mm |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | ABS 500 x 400 x 1,5 mm (white) |
| 2 x | Crystal Universal RX 35.140 Ch 74 |
| 1 x | Glass fibre sleeve Ø 20 mm |
| 1 x | AL Axle Shaft 4.0x16 mm (2 uds) |
| 1 x | Glass fibre sleeve Ø 20 mm X 10m |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 1 x | Chopped glass fibre strands 3 mm |
| 1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
| 1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
| 1 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
| 1 x | Landing gear axle Ø 8 mm (2 uds) |
| 1 x | PVC grid straight 290x185x0.32 mm |
| 1 x | Crystal Universal RX 35.050 Ch 65 |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
| 1 x | Fiberglass plate 350x150x0.5 mm |
| 2 x | Extractor piñones 2.3/3.2 mm |
| 1 x | Crystal TX 35.150 Ch 75 |
| 1 x | Glass fabric 25 g/m² (1 m²) |
| 1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
| 1 x | Receiver Crystal 35 Mc/s Ch 62 |
| 1 x | Metalic nose for PROJETI |
| 2 x | Crystal Universal RX 35.090 Ch 69 |
| 1 x | Motor mount class 48" |
| 1 x | Crystal RX 35.120 Ch 72 |
| 1 x | CM-3 |
| 1 x | Brass rod Ø 1.5 mm x 1000 mm |
| 2 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 2 x | Connector CAN 15 |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | 4 LiPo XH>EH adapter |
| 1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
| 1 x | Straightened rod Ø 4.5 mm x 1000 mm |
| 1 x | CC 03 |
| 1 x | Straightened rod Ø 1.0 mm x 1000 mm |
| 1 x | Straightened threaded rod M3 - 1m |
| 1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | CC 05 |
| 1 x | DPSI Ampere battery backer |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | Straightened rod Ø 1.5 mm x 1500 mm |
| 1 x | Adapter lead MPX/EC3 |
| 2 x | Cabel charger transmitter GRAUPNER |
| 1 x | Battery charging cable XT60 |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | Cabling for Fox MDM1 wings |
| 2 x | Straightened rod Ø 5.0 mm x 1000 mm |
| 2 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | 5 LiPo XH>EH adapter |
| 1 x | 30 cm BEC cable (female) |
| 1 x | Circlick securite |
| 1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
| 1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 2 x | Straightened rod Ø 6.0 mm x 1000 mm |
| 1 x | CC 02 |
| 1 x | Connector Sub-D 2+5 Female |
| 1 x | PIX Hawk with accesories |
| 1 x | Digital Air Speed Sensor And Pitot Tube Set |
| 1 x | PPM Encoder Module |
| 1 x | Ferrita 27x14x7 mm |
| 1 x | Tapa estado carga XT-60 (6 pcs) |
| 1 x | Aro pasacable Ø20 mm (4 pcs) |
| 1 x | Soporte filtro FESTO (4 pcs) |
| 1 x | Support pump Xicoy X45 |
| 1 x | Support Flush MPX Conector (6 pcs) |
| 1 x | 3,2 mm Prop Adapter M6 |
| 1 x | 290 mm 8x4 M4 shaft ship |
| 1 x | DA 85 / DA 100 / DA 100 L carburetor |
| 1 x | Fuselage Autogyro RAINBOW |
| 1 x | Switc electronic 30 Amp |
| 1 x | 11x7 tree blades propeller |
| 1 x | 14 mm Portholes for screws (10 pcs) |
| 1 x | LASER 260 60" V2 ARF Yellow (SkyWing) |
| 1 x | 2.3 mm Adapter for 30 mm spinners |
| 1 x | "L" servo arm 65x49 mm (2 pcs) |
| 1 x | 10 mm portholes (10 pcs) |
| 1 x | 3.2 mm Prop Adapter M8 |
| 1 x | ESC ALPHA 60A HV |
| 1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
| 1 x | Z type of cable coupler Ø 2 (2 uds) |
| 1 x | Z type of cable coupler Ø 1 (2 uds) |
| 1 x | Brass ball links BS M3 V1 (10 pcs) |
| 1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
| 1 x | Suction funnel for carburetor WALBRO 20-80cc (red) |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | Suction funnel for carburetor DA70- MVVW 190cc (red) |
| 1 x | MZ-18, 9 Channel HoTT |
| 1 x | LA500 tail empennage |
| 1 x | Interruptor SPS 70v 60/120A |
| 1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
| 1 x | USB Interface REVOLECTRIX for CellPRO 10s |
| 1 x | Female connector for 12 pines AWG |
| 1 x | Combo AM480 T-Motor 650 Kv |
| 2 x | Crystal Universal RX 35.030 Ch 63 |
| 1 x | SPARK Switch 12v |
| 1 x | AXI 2820/12 V2 Long |
| 1 x | Motor Mega AC 16/35/01 |
| 1 x | Micro Switch button |
| 1 x | AXI 2820/12 V2 |
| 1 x | Prolonguer for Balancer Thunder Power 6S |
| 1 x | AXI 2826/6 V2 Long |
| 1 x | Adpater for mounting VMKG gearbox in 480 motor |
| 1 x | 1000 cc gasoline fuel tank complet |
| 1 x | Copier 5x20 cm pcs |
| 1 x | O-Ring SAITO FG-60 R3 |
| 1 x | RCEXL Electronic ignition twin CM-6 |
| 1 x | Tube bender |
| 1 x | 110x55 mm C SLH KOVO wheel |
| 1 x | 152x46 Ø6.0 mm aluminium core wheel |
| 1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
| 1 x | Silicone red 0,5 qmm wire ( 1 m) |
| 1 x | 20x200 mm battery rings |
| 1 x | 1/6 Pilot "Buddy" |
| 1 x | 1/6 Pilot "John" |
| 1 x | 100x50 mm SLH KOVO wheel |
| 1 x | Wheel FEMA 127 mm / 6 mm |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 1 x | Mudguard for 140/165 mm wheels |
| 1 x | KIRA 600-17 |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | Electric coversion set |
| 1 x | KIRA 500-30 6,7:1 |
| 1 x | Indoor motor holder |
| 1 x | LENTUS Multiplex Fundas alas |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 1 x | Frontal support Speed 280 |
| 1 x | Ø 38 mm fiberglass motor-holder for electric motors |
| 1 x | Servo RHINO pro SHV digi 4 |
| 1 x | Transmitter Crystal 35 Mc/s Ch 77 |
| 1 x | Straightened rod Ø 0.5 mm x 1000 mm |
| 1 x | Motor A40-10 L V2 14-Pole Glider |
| 1 x | Brass rod Ø 0.8 mm x 1000 mm |
| 1 x | A30-M/L/XL Backmountset complete |
 |
| 12,033.33EUR |
