1 x | Propeller balancer |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Field folding model stand SebArt |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | WingFix ULTRA Black Edition |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
2 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
2 x | Beech dowels 4.0 x 1000 mm |
1 x | Propeller balancer |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Angle of incidence meter |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | BALSA leading edge 8x10x1000 mm |
3 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Medidor ángulos y/o incidencias |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | Carbon fiber rod 12 mm x 1000 mm |
3 x | Carbon fiber rod 1.0 mm x 1000 mm |
1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
2 x | Carbon fiber rod 16 mm x 1000 mm |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
2 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | Horn with ball 55x40 |
1 x | 6 mm red aluminium threaded horn with patella |
2 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Horn 5/20 with M2 Bearing |
1 x | Cable control set |
1 x | Horn 6/35 with M3 Bearing |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Horn 6/20 with M3 Bearing |
1 x | Horn 6/27 with M3 Bearing |
2 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Horn 20x28,5 mm (2 pcs) |
2 x | RH long aluminium horn (2pcs) |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Horn 5/10 with M2 Bearing |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | Interface Jack Adapter IKARUS |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
2 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | Vacuum bag, 1200 mm x 50 m |
2 x | RF9 Flight Simulator with Spektrum Controller |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Glases Ace |
1 x | Tube Pitot to PIXHAWK |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | 1/12 Pilot "Tom" |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Angle measurer |
1 x | Actuador lineal HLS12-100210-7.4v |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | SATORI 2 PRO V C64 F5J |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Set stickers JEEMO "Andy" |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Small aluminium horn red (2pcs) |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
1 x | Small adjustable aluminium control horn with bearing 2,8x15 |
1 x | Rudder forward 80x28 "type Kato" |
1 x | Small control horn with bearing (2 pcs) |
1 x | Long horn 50x26 |
1 x | Control horn long w/ball |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Small aluminium horn blue (2pcs) |
1 x | Horn 16,5x20 mm (2 pcs) |
2 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Horn DUBRO 1/2A |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
1 x | Surface Indicator Gauge Small |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
2 x | EasyFLY Addon |
1 x | SIMtransmitter 6 Mode 2 |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Slave-cable USB Easy Sim |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Servo HBS 690BB HV Digital |
1 x | SERVO DES 707 BB MG |
1 x | P 17×5.8 Prop-2PCS/PAIR |
1 x | Helices DJI Mavic Air 2 STEALTH "Black" (4x Ud) |
1 x | Landing gear Rocket 400 |
1 x | BALSA triangular 8x8x1000 mm |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | Mini VISION "spread tow" CFK |
1 x | VAGABOND 1500 mm ARF V2 (Blue) |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
|
5,771.83EUR |