1 x | XT-60 connector (female) |
2 x | Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re |
1 x | Turbina KINGTECH K320 G5 |
1 x | Crimping tool |
1 x | Starter EM Gear Power 80 |
1 x | Adaptadores carga 6s JST-XH |
2 x | EXTRA NG 74" white/red/blue (Skywing RC) |
3 x | Extension MPX-MPX 20 cm |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | BEC 3A FOXY |
2 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | GameCommander USB Universal |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
2 x | Slave-cable USB Easy Sim |
1 x | SIMtransmitter 6 Mode 2 |
2 x | Circlick securite |
1 x | Dean "T" - Futaba Adapter |
1 x | Simulador RealFlight RF-9.5 S (sin emisora) |
1 x | EasyFLY Addon |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Interface Jack Adapter IKARUS |
1 x | CC 03 |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
1 x | MPX-Dean "T" Adapter |
1 x | 3 LiPo XH>EH adapter |
1 x | CC 02 |
1 x | CC 05 |
1 x | 30 cm BEC cable (male) |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | PVC 0,25 qmm servos wire Graupner (5 m) |
1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
1 x | White silicone 0,25 qmm wire (100 m) |
1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
1 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
1 x | White silicone 0,25 qmm wire (150 m) |
1 x | Silicone 0,50 qmm servos wire Graupner(5 m) |
1 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
1 x | Glases Flitemaster |
2 x | Glases Ace |
1 x | Glases Stratus |
1 x | Horn with ball 55x40 |
1 x | Horn 6/35 with M3 Bearing |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | 6 mm aluminium horn with patella |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
2 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
2 x | Small aluminium horn red (2pcs) |
1 x | Horn with ball 40x30 |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | SlowFlyer control horn (3 pcs) |
1 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | 20 mm carbon horn |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Small aluminium horn gold (2pcs) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Horn 5/15 with M2 Bearing |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Horn 5/20 with M2 Bearing |
1 x | Horn 5/10 with M2 Bearing |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Horn 6/20 with M3 Bearing |
1 x | Small aluminium horn blue (2pcs) |
1 x | Horn 6/27 with M3 Bearing |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | White smoke canister 100 g |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Actuador lineal HLS12-100210-7.4v |
2 x | White gelcoat 1 Kg |
5 x | resin-hardener L-385 H-385 (5000 g) |
2 x | Motor SAITO FG-61 TS |
2 x | DUPLEX 2.4EX Central Box 210 |
3 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
1 x | Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey) |
2 x | Servo slow down unit (0,7-14,7 sec ) |
1 x | wing/fuselage connector for 12 pines AWG 20-24 |
1 x | PWC4 wing/fuselage connector for 4 servos |
1 x | SPS 70V 140/280 A |
1 x | SPARK Switch 5.9v |
1 x | Multi-adapter balancer JST - TP |
1 x | Multi-adapter balancer JST/C - TP |
1 x | USB Interface REVOLECTRIX for CellPRO 10s |
1 x | 31,0 mm propeller (rigth propeller) |
1 x | Extension 2/3 lipos JST/C |
1 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
1 x | 120x60 mm SLH KOVO wheel |
1 x | 290x4 mm M4 shaft ship |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
2 x | CC 01 |
1 x | 28 mm turnbuckle |
1 x | wing/fuselage connector for 3 pines AWG 20-24 |
1 x | 3 mm Leader (L 100 mm) |
1 x | 261 mm M4/M4 6.0x4.0 mm shaft ship |
2 x | Conector MR-60 (pareja) |
1 x | Servo SAVOX SV-0236 MG HV |
1 x | Glases Moritz |
1 x | Wheel collar 4 mm Ø (4 uds) |
1 x | Blue aluminium servo arm V2-Hitec 1,75" inch M3 |
1 x | Glases Innovation Plus |
1 x | Double aluminium servo arm V1-Hitec 2,5 inch M3 (blue) |
1 x | Gold aluminium double servo arm V3-JR 3.5 inch M3 |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Servo AN-8 HBA |
1 x | Red aluminium servo arm V2-Futaba 1,25" inch M3 |
2 x | Blue aluminium servo arm V2-Hitec 2,0 inch M3 |
1 x | Handle for PERMAGRIT lime |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
1 x | Kwik link unmount tool |
1 x | Goma arrancador Ø36 mm x 30 mm |
1 x | Dust collector for mould cleaning |
1 x | Precision wrench L100 mm |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | Jeti Advance Plus Program Card |
1 x | Servo SAVOX SV-1254 MG HiVolt Low Profile |
2 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
1 x | Savox Brushless Servo SC-1251 MG |
2 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
2 x | Servo DITEX TD2612S |
3 x | Servo mounting frame SV-1260MG |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
1 x | Servo SAVOX SV-1260 MG |
1 x | ProgBOX MASTER Hacker |
1 x | Servo SAVOX SV-1273 TG |
1 x | Servo SAVOX SB-2290 SG |
1 x | Kontronik ProgUnit |
1 x | Blue aluminium servo arm V1-Hitec 1,5" inch M3 |
1 x | Savox Brushless Servo SC-1267 SG |
1 x | Medium extra-strong control horn with bearing 2,8x24 |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
1 x | Horn mando long (2 pcs) |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
2 x | resin-hardener package L-385 with hardener H-385 (875 g) |
1 x | Receiver bed (Blue) |
2 x | Electric coversion set |
2 x | A50 Motor Mount Alu complete set |
1 x | Size "L" motor holder for class 600 |
3 x | resin-hardener package L-385 with hardener H-385 |
1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
1 x | ESC MEZON 115 Opto |
1 x | Racor 2/3 mm |
2 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Motor mount for 1200 mm models |
1 x | Central support Speed 600 |
3 x | Mould Resin P + Hardener EPH 161-P, kit/ 585 g |
1 x | Frontal support Speed 600 |
2 x | Bearings for motor HACKER C50 |
1 x | Ø 38 mm fiberglass motor-holder for electric motors |
4 x | Mould Resin P 10 kg |
1 x | Hardener Aero EPH 161 (250 g) |
1 x | Frontal support Speed 400/480 |
3 x | resin-hardener L-385 H-385 (1250 g) |
2 x | Hacker A30-S Radial Set |
2 x | Ø 40 mm fiberglass motor-holder for electric motors |
3 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
3 x | MEKP Harderner 100 g |
1 x | Motor mount for 1 m models |
3 x | Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g |
1 x | Radial heatsink for MPJ AC25/35-xx motor |
4 x | Hardener Aero EPH 161 (500 g) |
2 x | Epoxy Resin L + Hardener CL (60 min) kit/ 930 g |
1 x | |
1 x | |
2 x | Motor mount M |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg |
1 x | Fiberglass motor-holder for electric motors |
1 x | Frontal support Speed 280 |
1 x | A60 Motor Mount Alu complete set |
2 x | Cooler motor type 400 |
2 x | Motor holder AXI |
1 x | Ø 28 mm fiberglass motor-holder for electric motors |
3 x | resin-hardener package L-385 with hardener H-385 (3.5 Kg) |
3 x | Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs |
1 x | Central support Speed 280 |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
2 x | Cooler motor type 280 |
3 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg |
2 x | resin-hardener L-385 H-385 (625 g) |
3 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
3 x | Hardener P-25, canister 2.5Kg |
1 x | HOPPER tank Digitech 250 ml (Festo nipples 6 mm) |
2 x | Oracover light Grey 2m |
1 x | Refueling Cap V3 Black |
1 x | DPSI magnetic switch actuator (PCB) |
1 x | Bidule 170 ARF 3.48 m |
1 x | Switching module high voltage SXH |
1 x | wing/fuselage connector for 16 pines AWG 20-24 |
1 x | Interruptor SAFET-SWITCH 12HV Twinbatt |
1 x | 4 LiPo XH>EH adapter |
1 x | Ringöse 12 mm (50 pcs) |
1 x | Molinete / Cabestrante amarre Scale 1:32 |
1 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
1 x | Prolonguer for Balancer Thunder Power 6S |
1 x | Red-Green position light 3-6V 35 mm (2 pcs) |
1 x | TMM 1210-3S heli |
1 x | CARBON CUB 15cc ARF 2280 mm |
1 x | EWC3 40 cm wing connector |
1 x | Blades 330mm |
1 x | RF9 Flight Simulator with Spektrum Controller |
1 x | SBEC Jeti |
1 x | SBEC 30 D |
1 x | JETImodel DPS 40 |
1 x | MAX BEC 2D plus EX |
1 x | Magnetic Interruptor MULTIPLEX |
1 x | EWC6 40 cm wing connector |
1 x | Selfstart electronic switch |
1 x | JETImodel Addcap 1640 |
1 x | Cabling for Fox MDM1 wings |
1 x | USB HLS prog. interface |
1 x | SPS Remote switch actuator |
1 x | JETImodel SINGLE BEC |
1 x | Wingstabi 9 DR M-Link Receiver |
1 x | aluminium servo arm V2-JR 2,0 inch M3 |
2 x | Blue aluminium double servo arm HITEC 2,5 inch M3 |
1 x | Gold aluminium double servo arm JR/Graupner 40 mm M3 F3A |
1 x | Servo KST X15-1208 V8.0 13.5Kg HV |
1 x | Propeller RABOESCH.Ms 70L (5 Blades) (Left hydropropeller) |
1 x | Ojos de buey 5 mm (10 pcs) |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Top light 6mm/3V Red (2 pcs) |
2 x | 10 mm gas motor standoff |
1 x | 45 mm flag mast |
1 x | Lancha salvavidas 58 mm (5 pcs) |
1 x | Female connector for 6 pines AWG |
1 x | TrainerCord (master-learner) |
1 x | ALU servo arm 3 mm shaft |
1 x | USB Charger 12V DC for car |
1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
1 x | Servo Bolt M3x6 (8 pcs) |
1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
1 x | aluminium servo arm V1-JR 1,0 inch M2 |
1 x | SAVOX SH 1250 MG servo digi |
1 x | Piñones SAVOX SH-0350 |
1 x | PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF |
1 x | Blue aluminium servo arm V3-Hitec 1,0inch M3 |
1 x | Soporte servo KST X08/H and Plus |
1 x | Servo ROBBE FS-31 Pico Servo |
1 x | Servo KST DS125MG servo ala 10mm 28g 7Kg |
1 x | Gear carbonite set HITEC HS-6965 |
1 x | SAVOX SH 0254 servo |
1 x | Servo KST X10 V2.0 ala 10mm 28g 10.8Kg |
1 x | Servo SAVOX SV-1270 TG |
1 x | Gear set HITEC HS-56 HB |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | ER40 Front Leg (with wheel 80mm) |
1 x | ER40eVo set B (20 Kg) |
1 x | Captador RCEXL para DA |
1 x | Tank ULTIMATUM 2.0 (3.2 L) PRO |
1 x | Servo M2x5/16 screw (4 pcs) |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
1 x | BOEING 727, Retract set for Boeing 727 |
1 x | Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one |
1 x | L-39 Albatros 1:4.75, Electric retract landing gear |
1 x | F-4 Phantom Scale 1:7, Electric retract landing gear |
1 x | Electric Landing Gear ASPIRE (Elektron Retracts) |
1 x | Propeller POWER-PROP 14x9 |
1 x | Electric Landing Gear PC-21 Skymaster (Elektron Retracts) |
1 x | Electric Landing Gear ODYSSEY +GS200 (Elektron Retracts) |
1 x | ER-50eVo Set A [2x ER50 + RB-45] |
1 x | Set transmisions ULTIMATUM 2.0 (stainless/aluminium) |
1 x | Jet Pipe for ULTIMATUM 2m |
1 x | Wing Joiner ULTIMATUM 2.0 m |
1 x | Motor Mount for Multiplex FunJet |
2 x | USB Adaptor OPTronics |
1 x | ASPIRE Red ARF 2.000 mm |
1 x | ASPIRE Navy ARF 2.000 mm |
1 x | ASPIRE Red ARF 2.000 mm, Fuselage |
1 x | ANGEL 48" pp red/blue/white |
1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
1 x | Propeller POWER-PROP 7x7 |
1 x | Brake disc Electron Retracts |
1 x | Nose leg 155 mm with wheels 70 mm |
1 x | Electric Landing Gear ULTIMATUM 2.0 (Elektron Retracts) |
1 x | Electric Landing Gear "Black Edition" ULTIMATUM 2.0 (Elektron Re |
1 x | Electric Landing Gear GS-200 ULTIMATUM 2.0 (Elektron Retracts) |
1 x | GS-200 Electronic |
1 x | Tank ULTIMATUM 2.0 (3.2 L) + Smoke (0.9 L) PRO |
1 x | Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox |
1 x | Electric Landing Gear ULTIMATUM 3.0 (Elektron Re |
1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
1 x | Sun Cover PC 21 XXL (JMB Jets) |
1 x | Epoxy Resin L (2.5 Kg) |
1 x | Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg |
1 x | Tren retractil ULTIMATUM 1.5 combo ER30 SEt B (ControlBox) |
1 x | Tank Kevlar ASPIRE 6 L Kero |
1 x | Brake controller for 28 and 36 mm Brakes |
1 x | F9F COUGAR Red ARF 1.562 mm |
1 x | Servo GO-1023MG 7.0 kg.cm 0.09s/60º |
1 x | Tank Kevlar ASPIRE 4 L Kero / 1.5 L Smoke |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | Epoxy 5min KAVAN 2x 100g |
1 x | Charger ISDT 608AC 200W |
1 x | F-16 Scale 1:6, Electric retract landing gear |
1 x | Tank + hopper Kevlar ASPIRE 6 L Kero |
1 x | Servo GO-1073MGW 32 kg.cm 0.135s/60º |
1 x | F4E Phantom Scale 1:7 |
1 x | HAWKER HUNTER 1:5,8, Electric retract landing gear |
|
52,242.16EUR |