| 1 x | 45 mm rods set for direction control |
| 1 x | 45 mm rods + T patellas set for direction control |
| 1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
| 2 x | Aluminun wheel collar 4 mm Ø (4 uds) |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 2 x | 140 mm rods set for direction control |
| 3 x | Allen wheel collar M3x5 |
| 2 x | 100 mm rods set for direction control |
| 3 x | Cable grommet 9.5 mm (4 uds) |
| 2 x | Allen wheel collar M4x4 |
| 4 x | 100 mm rods + T patellas set for direction control |
| 1 x | 90 mm rods + T patellas set for direction control |
| 4 x | 41x5,5 mm wires output (2 pcs) |
| 1 x | Cable grommet Ø 5 mm (4 uds) |
| 2 x | 28x5 mm wires output (2 pcs) |
| 2 x | 11 mm Rubber pads (14 pcs) |
| 3 x | Cabin latch Fox MDM1 4m (pair) |
| 2 x | Allen wheel collar M4x6 |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 1 x | Cockpit aluminium closing |
| 1 x | Cable grommet Ø 6.4 mm (4 uds) |
| 2 x | 38x4,5 mm wires output (2 pcs) |
| 4 x | 140 mm rods + T patellas set for direction control |
| 2 x | Clip mini fixing for wing (2 pcs) |
| 2 x | Allen wheel collar M3x3 |
| 1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
| 3 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
| 1 x | Cable tie mounts 4.3 (4 uds) |
| 1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
| 1 x | Cable grommet Ø 3.2 mm (4 uds) |
| 2 x | 250 mm / 16 mm Airbrakes |
| 1 x | Jeti Black cap |
| 2 x | Ventus 1:4 set of instruments |
| 1 x | 1 m servo "Premium" wire (white/red/blue) |
| 2 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
| 1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
| 1 x | Silicone 0,35 qmm servos wire Graupner(100 m) |
| 2 x | PVC 0,25 qmm servos wire Graupner (5 m) |
| 2 x | PVC 0,35 qmm servos wire Graupner (100 m) |
| 2 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
| 2 x | Black silicone 0,25 mm² wire (25 m) |
| 1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
| 1 x | JR silicone servo wire 0,35 qmm / 5m |
| 2 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
| 1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
| 1 x | Silicone red 0,25 mm² wire (25 m) |
| 1 x | Silicone 0,50 qmm servos wire Graupner(100 m) |
| 1 x | Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC |
| 1 x | 10m servo "Premium" wire (white/red/blue) |
| 1 x | 200m servo "Premium" wire (white/red/blue) |
| 1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
| 1 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
| 2 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
| 2 x | White silicone 0,25 qmm wire (150 m) |
| 2 x | 80 mm rods set for direction control |
| 1 x | Clip fixing for wing (2 pcs) |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 2 x | PIX Hawk with accesories |
| 1 x | Tube Pitot to PIXHAWK |
| 2 x | PPM Encoder Module |
| 1 x | Snap for floding prop for 2 mm axi |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | Tip wing protector 28x10x12 (2 pcs) |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Split M1,2x10 (10 pcs) |
| 1 x | Snap short M2 (10 uds) |
| 1 x | Landing gear frontal support 29x26x13,5 |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 2 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | Cockpit plastic closing |
| 1 x | Tip wing protector 30x10 (2 pcs) |
| 1 x | Tip wing protector 40x14 (2 pcs) |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 2 x | Landing gear frontal support 25x32x16 |
| 1 x | Conector JR Servo female (50 pcs) |
| 1 x | 3,2x1000 mm 2:1 black termoretract tube |
| 1 x | 4,8x1000 mm 2:1 red termoretract tube |
| 1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
| 2 x | 6 mm red aluminium threaded horn with patella |
| 1 x | Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs) |
| 1 x | Aluminium cap bolt washer M3 green (8 pcs) |
| 1 x | ABS tube 6.0x4.0x1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
| 1 x | Pine wood slat 3.0x5.0x1000 mm |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | Canopy Latch |
| 2 x | 4 mm M3 red control terminal (4 pcs) |
| 1 x | Propeller POWER-PROP 7x7 |
| 2 x | VBar NEO VLink 6.x Express, neon-yellow |
| 2 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 2 cell |
| 1 x | Adapter 3,0 mm M6 |
| 1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
| 1 x | Adapter 5,0 mm M8 |
| 1 x | |
| 2 x | 6 mm Prop Adapter M8 |
| 1 x | 10 mm dogdrive props |
| 1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
| 1 x | Adapter 3,0 mm M6 for spinner 40 mm fixed propeller |
| 1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
| 1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
| 1 x | Extension silicon 30 cm male (Futaba) |
| 1 x | Extension lead 15 cm Multiplex |
| 1 x | Extension 90 cm (Futaba) |
| 1 x | Extension silicon 10 cm (Futaba) |
| 1 x | Futaba Female 40 cm extension |
| 1 x | Extension silicon 30 cm male (Graupner) |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 2 x | Window mounting channel 5m |
| 1 x | Snap long M2 (10 uds) |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 1 x | Mould Resin P 10 kg |
| 1 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 1 x | Thixotropic agent TM 100, tin/ 75 g (approx. 1 l) |
| 1 x | Wheel collar 3 mm Ø (4 uds) |
| 1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
| 1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
| 1 x | Cotton Flocks, bag/ 7 Kg |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | Sanyo RX Battery Eneloop 4,8 V JR |
| 1 x | Sanyo RX Battery Eneloop 6,0 V JR |
| 1 x | Screw-lock connector M2 (2 uds) |
| 1 x | Sanyo RX Battery Eneloop 4,8 V JR |
| 1 x | Sanyo RX Battery Eneloop 6,0 V Futaba |
| 1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
| 1 x | Propeller MENZ-S 15x8 |
| 1 x | Propeller electric carbon 10.5x8 |
| 1 x | Propeller MENZ-S 21x8 |
| 1 x | Propeller MENZ-S 15x10 |
| 1 x | Propeller electric carbon 8.5x5 |
| 1 x | Propeller MENZ-S 19x10 |
| 1 x | Propeller MENZ-S 15x8 3 blades |
| 1 x | 6 mm aluminium horn with patella |
| 1 x | 6 mm blue aluminium threaded horn with patella |
| 1 x | Flybar support metal LAMA |
| 1 x | Propeller POWER-PROP 13x9 Izda |
| 1 x | Propeller MENZ-S 20x10 |
| 1 x | Propeller MENZ-S 21x12 |
| 1 x | Dumper propeller 6/8 mm |
| 1 x | Propeller MENZ-S 15x6 3 blades |
| 1 x | Propeller POWER-PROP 14x10 |
| 1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
| 1 x | Extension 30 cm (Futaba) |
| 1 x | Propeller POWER-PROP 14x8 |
| 1 x | Propeller APC 11x5.5 Electric |
| 1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
| 1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
| 1 x | Protective Cover for wires Ø 6 mm 1000 mm |
| 1 x | Black spiral protective cover for wires Ø 0,5/50 mm - 25 m |
| 1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
| 1 x | Extension silicon 30 cm female (Graupner) |
| 1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
| 1 x | Transparent spiral protective cover for wires Ø 0,5/50 mm - 25 m |
| 1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 4 cell |
| 1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
| 1 x | Propeller electric carbon 6.5x4 |
| 1 x | Propeller POWER-PROP 12x8 |
| 1 x | Propeller 8x4,3 SlowFlyer |
| 1 x | Propeller 8x4 Electric |
| 1 x | Propeller APC 12x8 Glow/Gas |
| 1 x | Propeller POWER-PROP 16x10 |
| 1 x | Propeller MASTER 7x6 |
| 1 x | Propeller APC 11x5.5 Electric Pusher |
| 1 x | Propeller APC 16x10 Glow/Gas |
| 1 x | Propeller APC 11x7 SF |
| 1 x | Propeller POWER-PROP 16x8 |
| 1 x | 15x7 tree blades propeller |
| 1 x | Propeller MASTER AIRSCREW 9x6 |
| 1 x | 8x6 tree blades propeller |
| 1 x | Propeller APC 12x3.8 SF |
| 1 x | Propeller POWER-PROP 13x8 |
| 1 x | Propeller APC 14x6 Glow/Gas |
| 1 x | Propeller APC 12x8 Electric |
| 1 x | White silicone 0,25 qmm wire (100 m) |
| 1 x | Cable Cargador FUTABA |
| 1 x | |
| 2 x | Protective Cover for wires Ø 15 mm 1000 mm |
| 1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
| 1 x | Pulley brass 6/1,5 (2 pcs) |
| 1 x | Tapping Screw M2.9x13 (10 pcs) |
| 1 x | Landing gear strap small (4 uds) |
| 1 x | Charger LiPo Charger4 |
| 1 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
| 1 x | Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm |
| 1 x | Protective Cover for wires Ø 10 mm 1000 mm |
| 1 x | 6 mm Quick clamp_S (10 pcs) |
| 1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell |
| 1 x | Protective Cover for wires Ø 3 mm 1000 mm |
| 1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
| 2 x | 10 mm Quick clamp_L (6 pcs) |
| 1 x | Protective Cover for wires Ø 20 mm 1000 mm |
| 1 x | Fiberglass heat shield Ø 4 mm 1000 mm |
| 1 x | Extension MPX-MPX 20 cm |
| 1 x | Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T, |
| 1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 5 cell |
| 1 x | Fiberglass heat shield Ø 8 mm 1000 mm |
| 1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell |
| 1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell |
| 1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 6 cell |
| 1 x | Fiberglass heat shield Ø 6 mm 1000 mm |
| 1 x | M3-M4 rubber washer (8 pcs) |
| 1 x | Horn micro type4 Ø 0,5 (2 pcs) |
| 1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
| 1 x | Brass control horn M2 short for wire (2 pcs) |
| 1 x | Spinner NUT M8x1,25 |
| 1 x | Landing gear axle Ø 5 mm (2 uds) |
| 1 x | Protective open Cover for wires Ø 13 mm 1000 mm |
| 1 x | Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs) |
| 1 x | Cable set PREMIUM, fuselage/wing |
| 1 x | Motor holder for AC 28/7 |
| 1 x | Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs) |
| 1 x | Plastic wheels 36 mm (2 pcs) |
| 1 x | Tapping Screw M2.2x13 (10 pcs) |
| 1 x | Split pin 1.6x16 mm (10 uds) |
| 1 x | Support pump Xicoy X45 |
| 1 x | 9x7 tree blades propeller |
| 1 x | Pulley brass 16/2 (2 pcs) |
| 1 x | SKY RC T400Q Charger 4x100w |
| 1 x | Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg |
| 1 x | resin-hardener L-385 H-385 (625 g) |
| 1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg |
| 1 x | Battery LiFe TopFuel 3100 mAh 3s MTAG 30C |
 |
| 6,146.42EUR |
