2 x | Rudder |
1 x | Blade holder center |
2 x | Nut M2 |
2 x | Screw M3x16 |
1 x | Rotorhead pushrod |
1 x | Blade holder lower |
2 x | Blades 330mm |
1 x | Tail support (2 pcs) |
1 x | Bearing 3x6x2,5 |
1 x | Blade holder center GFK 0,5 mm |
2 x | Raer wall |
2 x | Rotor Mast |
1 x | Head lower part New |
3 x | Head upper part |
2 x | Grub screw M3x3 shouldered (2 pcs) |
3 x | Baering 3x8x4 |
2 x | Head lower part |
2 x | Washer 2.2×4 |
1 x | Screws flush mount M2 |
2 x | Screws M1,6x6 Allen |
2 x | Side rudder |
1 x | Head core |
4 x | Tail tube RAINBOW |
1 x | Autogyro Cierva C30 Spain |
3 x | Nut M1,6 |
4 x | Motor Mega AC 16/15/05 CE F5J |
2 x | Motor Mega AC 16/15/08 |
3 x | Battery plate |
2 x | Side Plate |
2 x | Motor Mega AC 16/20/02 |
1 x | Steering lever |
1 x | Balls 4 mm |
1 x | Wheel keeper washer |
2 x | Blade holder upper |
2 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Steel Screw M1x8 (10 pcs) |
2 x | Motor wall |
1 x | Vest clothes Hispano Aviación |
1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
1 x | Conector Servo female 4 pines |
1 x | Conector FUTABA Servo male (10 pcs) |
2 x | "M" set |
1 x | Red smoke canister 100 g |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | 30 cm DEANS female connector |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Conector FUTABA Servo female (10 pcs) |
1 x | 1000 ml sealer (DOPE) |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | Spray adhesive AEROFIX 2 |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Parachutist |
1 x | Medium pin type hinge (12 uds) |
1 x | Conector XT-150 6mm (Set: 5 pares) |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Ventus 1:4 set of instruments |
3 x | Green smoke canister 140 g |
1 x | Extension lead 15 cm Multiplex |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Circlick securite |
1 x | Conector JR Servo male (50 pcs) |
1 x | Spray Graphit 33 |
1 x | Motor Mega AC 16/15/07 COMBAT |
1 x | Motor Mega AC 16/15/04 COMBAT |
2 x | Motor Mega AC 16/07/04 |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
2 x | 3 mm Long Prop Adapter M5 |
2 x | Adapter 3,0 mm M6 for spinner 40 mm fixed propeller |
2 x | |
1 x | Nut M2 securing |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | Motor Mega AC 22/45/02 E |
1 x | Motor Mega AC 16/07/08 |
3 x | Blade Holder Full (4 blades) |
3 x | Motor Mega AC 22/35 4S |
3 x | Motor Mega AC 16/25/04 COMBAT |
1 x | Motor Mega AC 22/45/03 E |
1 x | Motor Mega AC 22/30/03 |
2 x | Motor Mega AC 16/15/04 |
2 x | Motor Mega AC 16/10/03 RACE |
1 x | MEGA GEAR 16 3,1:1 Gearbox |
3 x | Motor Mega AC 16/25/01E 3.17mm |
2 x | Motor Mega AC 16/07/03 |
1 x | 4 blades set |
1 x | MEGA AC 16/10/03 Race + PG 5:1 F5J motor brushless |
2 x | Motor Mega AC 16/30/01 |
2 x | Motor Mega AC 16/25/02 |
2 x | Motor Mega AC 16/15/07 |
3 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | 10 mm dogdrive props |
2 x | Adapter 3,2 mm M6 |
2 x | 5 mm Prop Adapter M8 |
2 x | Adapter 4,0 mm M6 |
2 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
2 x | Allen wheel collar M3x3 |
3 x | 2 mm Prop Adapter M5 |
2 x | Aluminun wheel collar 3 mm Ø (4 uds) |
3 x | Adapter 3,2 mm M5 for spinner 30 mm fixed propeller |
2 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Allen wheel collar M4x4 |
2 x | Adapter 3,2 mm M8 |
1 x | 12 mm dogdrive props |
2 x | Adapter 3,2 mm M6 for spinner 40 mm fixed propeller |
2 x | Adapter 5,0 mm M6 for spinner 40 mm fixed propeller |
1 x | 2,3 mm Prop Adapter M5 |
2 x | Adapter 2,3 mm M5 for spinner 30 mm fixed propeller |
2 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Tail boom |
1 x | Head core bushing |
1 x | Rotorshape Elevator |
1 x | Head runner |
1 x | Coversion set HIROBO EX/EAGLE elektro |
1 x | Propeller APC 10x6 Electric Pusher |
1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
1 x | |
1 x | Propeller APC 11x7 Glow/Gas |
1 x | Propeller APC 10x3,8 SF Electric Pusher |
1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
1 x | FA27.2×8.9 Prop-2PCS/PAIR |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | Carbon plate 550x350x4.0 mm ECOTECH |
1 x | Carbon plate 700x550x0.5 mm |
1 x | Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain) |
1 x | Solvent Plasti Dip 1000 ml |
1 x | Spannlack 1000 ml |
1 x | Carbon plate 350x150x1.5 mm |
1 x | Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain) |
1 x | Universal Colour Paste white 50 g |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 2m |
1 x | Carbon plate 500x400x2.0 mm ISOTECH |
1 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
2 x | Fiberglass plate 350x150x2.5 mm |
2 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Styrene plate 320x120x0.5 mm |
1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
2 x | 3 mm Short Prop Adapter M5 |
2 x | Aluminium sheet 500x250x0,5mm |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Check valve V2 |
1 x | 1000 ccm gasoline fuel tank |
1 x | Suction funnel for carburetor WALBRO 20-80cc (blue) |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Allen wheel collar M3x5 |
1 x | Adapter 5,0 mm M8 |
1 x | Quicklock washer 1 mm (10 pcs) |
1 x | Screw-lock connector M2 (2 uds) |
1 x | JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT |
1 x | BOEING 727, Electric brake 28mm + controller |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
1 x | Carbon plate 550x350x1.5 mm ECOTECH |
1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
1 x | Carbon plate 550x350x2.5 mm ECOTECH |
1 x | Spray adhesive INFUTAC (Clear) 500 ml |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 20 m |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | Colormatic 2K Soft fine putty white, 1 kg |
1 x | Carbon plate 550x350x3.0 mm ECOTECH |
2 x | Chopped glass fibre strands 3 mm |
1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Glass fibre sleeve Ø 20 mm |
1 x | Smoke set "S" |
1 x | Electric rocket starters (6 pcs) |
1 x | Antenna holder bracket double |
1 x | Yellow smoke canister 100 g |
1 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
1 x | Sheet Depron Aero 1250x800x3 mm |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | White smoke bombs AX-3 (10 pcs) |
1 x | 3l Smoke oil |
1 x | Remote electric ignition system |
1 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | White 2,4 GHz antenna exit guides (2 pcs) |
1 x | Green smoke canister 65 g |
2 x | Foam plastic plates (310x210x2 mm) |
1 x | White smoke canister 100 g |
1 x | AX-60 starters (5 pcs) |
1 x | Styrene plate 320x120x1.0 mm |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Junta humo metalica G85 (DLE85/DLE170) |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Spring clamp for tube Ø29 mm ext 1pc |
1 x | Giant Scale Muffler D.A. 70 |
1 x | Sparkplug ROSSI R8 |
1 x | Polyurethan FESTO hose 3x0,5 mm, transparent |
1 x | FESTO connector M7 Quick 6 mm |
1 x | Conector FESTO G1/8 Quick 4mm 90º |
2 x | Motor Mega AC 16/25/06 |
1 x | Quick hose connector 6-6 mm |
1 x | FESTO Blanking plug G1/8 |
2 x | 6 mm Prop Adapter M8 |
1 x | Adapter 4,0 mm M8 |
1 x | Lock washer 2.2 mm (20 pcs) |
1 x | Allen wheel collar M4x6 |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | BOEING 727 kit |
1 x | AX-60 starters (5 pcs) |
1 x | Red smoke canister 140 g |
1 x | Fiberglass plate 350x150x1.0 mm |
1 x | Foam plastic plates (310x210x5 mm) |
1 x | PVC grid straight 290x185x0.32 mm |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | "S" set for planes |
1 x | Red smoke canister 65 g |
1 x | Chopped glass fibre strands 3 mm |
1 x | PVC grid diagonal 290x185x0.32 mm |
1 x | Blue smoke canister 140 g |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | PCARD Wireless System |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Fiberglass plate 350x150x0.3 mm |
1 x | B4-0 rocket charges (6 pcs) |
1 x | White smoke bombs AX-60 (5 pcs) |
1 x | Extinguisher CO2 - 2 Kg |
1 x | Initior Transmitter FTX2 Wireless |
1 x | Yellow smoke canister 65 g |
1 x | Foam plastic plates (310x210x3 mm) |
1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
1 x | Glass fabric 25 g/m² (1 m²) |
1 x | White smoke bombs AX-18 (5 pcs) |
1 x | Red smoke bombs AX-60 (5 pcs) |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Fiberglass plate 350x150x1.5 mm |
1 x | Yellow smoke canister 140 g |
1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | Glass fabric 25 g (2 m²) |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Canopy Latch |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Exhaust elbow for SAITO FA65/72/80/82a/91S/100/ |
1 x | Foam plastic plates (310x210x8 mm) |
1 x | Adapter 3,0 mm M5 for spinner 30 mm fixed propeller |
1 x | Junta humo metalica G20 (DLE20/DLE20RA/DLE40) |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Adapter 3,0 mm M6 |
1 x | Foreman, scale 1:32 |
1 x | Spring Clip Ø25 mm |
1 x | Threaded coupler M3 (10 uds) |
1 x | Compact Pitts Muffler OS MAX.35.40 FP |
1 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | Ignition bed V2 Red color |
1 x | EME 55 cc carburetor WALBRO |
1 x | 1/4 x 1/8" VITON tube for gas, kerosene, smoke (30 cm) |
1 x | Extra hard 1500 ccm complete gasoline fuel tank |
1 x | DA 85 / DA 100 / DA 100 L carburetor |
1 x | Spark plug key NGK MVVS |
1 x | Motor Mega AC 16/07/06 |
1 x | Sparkplug Saito 400 |
1 x | Blue "FUEL VENT" round aluminum overflow socket |
1 x | Black "FUEL VENT" round aluminum overflow socket |
2 x | Fuselage Autogyro RAINBOW |
1 x | Deposito DUBRO 360 ml - 12 oz |
1 x | Sparkplug 1/4-32 EVO 10GX |
1 x | Compact on-board starting system (9724) |
1 x | Electronic double valve landing gear |
1 x | Extension Arm for Carburetor |
1 x | Spark motor OS nº 3 |
2 x | Check valve quick hose connector 4-4 mm |
1 x | Deposito combustible tipo "turbina" 330 ml |
1 x | 18m Fitting barb |
1 x | Bujia OS G5 gasolina |
1 x | 1000 cc gasoline fuel tank complet |
1 x | Suction funnel for carburetor WALBRO 20-80cc (red) |
1 x | 3 blades set |
1 x | Suction funnel for carburetor 90D-L (red) |
1 x | Racor 4/4 mm |
1 x | QS Bulkhead Valve 4/4 mm |
1 x | Motor Mega AC 16/25/04 |
1 x | Motor Mega AC CAR 10 PRO |
1 x | Motor Mega AC 16/35/01 |
1 x | FESTO connector M7 barb fitting 4mm |
1 x | Blade Holder (3 blades) |
1 x | Quick hose connector 4-4 mm |
1 x | FESTO connector 1/8 Quick 6mm 90º |
1 x | T-Hose connector 2-2-2 mm |
1 x | FESTO Polyurethan tube for turbine 4x2,5x1000 mm (transparent) |
1 x | 2,3 mm Prop Drive Günther M4 |
1 x | |
2 x | 5 mm Prop Adapter M6 |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Flat washer 1.7 mm (20 pcs) |
1 x | Wheel cover holder Ø 3 mm (2 uds) |
1 x | Wheel cover holder Ø 4 mm (2 uds) |
2 x | 4 mm Prop Adapter M6 |
1 x | 3,2 mm Prop Adapter M5 |
1 x | Lock washer 2.7 mm (20 pcs) |
1 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | Quicklock washer 3 mm (10 pcs) |
1 x | Lock washer 3.2 mm (20 pcs) |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | Adapter 3,0 mm M8 |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Flat washer 2.2 mm (20 pcs) |
1 x | JEEMO Kit ARF Basic (2 color) - XTRALIGHT |
|
17,663.35EUR |