1 x | Mobile Terminal |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Couple M4 for wire (10 pcs) |
1 x | Round Rod 6,0x1000 mm |
1 x | Support ECU Xicoy X-45 |
1 x | Pasacables rectangular 40x15 mm (4 pcs) |
1 x | Secraft Fuel system v2, red color |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
2 x | Threaded coupler M3 (10 uds) |
1 x | Xplorer3 anemometro |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
1 x | Horn 6/20 with M3 Bearing |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | ABS I Strip 10x5x1000 mm |
1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
2 x | Strip ABS 2.0x10.0x1000 mm |
2 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | Horn 6/27 with M3 Bearing |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | Xplorer2 anemometro |
2 x | ABS I Strip 20x10x1000 mm |
1 x | Rudder 2_Tray 3.5~4 inch |
1 x | Interface Realflight Simulator |
2 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
2 x | Locking cable tie 2.5x100 (uds) |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Tapa estado carga XT-60 (6 pcs) |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Extractor piñones 2.3/3.2 mm |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Horn 20x28,5 mm (2 pcs) |
2 x | Transmitter Cadet 4Ch (V3) 2,4 GHz Mod.2 |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Round Rod 3,0x1000 mm |
1 x | Vasa model Catapult |
1 x | Rudder 2_Tray 3~3.5 inch |
2 x | Small aluminium horn red (2pcs) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Screw-lock connector M2 (2 uds) |
1 x | Horn 5/20 with M2 Bearing |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | Glases Nimbus |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Soporte grifo FESTO (2 pcs) |
1 x | Motor mount M |
1 x | ABS Strip 1.5x6.0x1000 mm |
1 x | 6 mm aluminium horn with patella |
1 x | Glases Aspen |
1 x | Aluminium wide washer M3 red (4 pcs) |
2 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | M3-M4 rubber washer (8 pcs) |
2 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Servo Mount M (blue) |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Round Rod 1,5x1000 mm |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | Angle of incidence meter |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | Rudder 2_Tray 4~4.5 inch |
1 x | "S" set for boats |
1 x | Cable Cargador FUTABA |
1 x | Yellow smoke canister 65 g |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | CC 05 |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | TWIST planeador gomas |
1 x | |
1 x | Spare Part Frame Set for EACHINE RACER 250 |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | Profile ABS Square 4 x 1000 mm |
1 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
1 x | 4 LiPo XH>EH adapter |
1 x | White smoke canister 65 g |
1 x | Green smoke canister 140 g |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
1 x | Cable set Premium™ MAXI "one4two" |
1 x | Blind nut M3 (4 pcs) |
1 x | Propeller Pleg CAM Carbon 16x10 |
1 x | Propeller Pleg CAM Carbon 12.5x7.5 |
1 x | Propeller Pleg CAM Carbon 10x7 Reverse Rotation |
1 x | Propeller Pleg CAM Carbon 11x10 |
1 x | Propeller Pleg CAM Carbon 13x11 |
1 x | Propeller Pleg CAM Carbon 15x10 |
1 x | Propeller Pleg CAM Carbon 13x5 |
1 x | Propeller Pleg CAM Carbon 14x12 |
1 x | Propeller Pleg CAM Carbon 14x6 |
1 x | Propeller Pleg CAM Carbon 11x8 |
1 x | Propeller Pleg CAM Carbon 12x6.5 |
1 x | Propeller Pleg CAM Carbon 12.5x6 |
1 x | Propeller Pleg CAM Carbon 14x7 |
1 x | Propeller Pleg CAM Carbon 12x5 |
1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
1 x | PT 22x10 EL Propeller |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | SD HC 8 GB |
1 x | Strip ABS 2.0x5.0x1000 mm |
1 x | Strip 2,0x2,0x330 mm |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | QS Bulkhead Valve 4/4 mm |
1 x | 8Wx2 Navigation & Strobe, 11mm Red/White |
1 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
1 x | Quick hose connector 6-6 mm |
1 x | 10 mm Quick clamp_L (6 pcs) |
1 x | Long adjustable control horn 3x34 |
1 x | Tapping Screw M2.2x65 (10 pcs) |
1 x | Flat washer 4.3 mm (20 pcs) |
1 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th |
1 x | Propeller Pleg CAM Carbon 15x8 |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | PT 21x13 EL Propeller 3 Blade |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Angle measurer |
1 x | Tailwheel for 40/90 size |
1 x | Pushrod greyline 4/3 with coupler M3 |
1 x | One touch canopy lock |
1 x | Snap for floding prop for 2 mm axi |
1 x | Oils Pumps Empty (1 liter) |
1 x | Triple rod con. 3mm Pushrod (2 pcs) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
1 x | Baseplate servo |
1 x | Xplorer4 anemometro |
1 x | Glow/Gas/Smoke/Kerosene filter |
1 x | Round Rod 4,0x1000 mm |
1 x | QS Bulkhead Valve 6/6 mm |
1 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
1 x | 4Wx2 Power Navigation Light, 13mm, T-Fuse White |
1 x | Support Flush MPX Conector (6 pcs) |
1 x | 15 mm gas motor standoff |
1 x | Resistor 3W 5% OR82 |
1 x | Turnbuckle M1,6x17/27 (2pcs) |
1 x | FESTO connector M7 barb fitting 6mm |
1 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | Festo 4mm Tubing Holder (10 uds) |
1 x | 6 mm Quick clamp_S (10 pcs) |
1 x | Soporte filtro FESTO (4 pcs) |
1 x | Conector FESTO M3 Quick 3mm 90º |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
2 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
1 x | wire tensioner (blue) |
1 x | Cover cap drop-shaped paintable 43 mm |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Ferrita 27x14x7 mm |
1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
1 x | Porta Kwik link M3 3 mm (2 pcs) |
1 x | 12 mm floating pad (49 pcs) |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Pan Head Screw M2x8 PH countersunk head |
1 x | Quicklock washer 2 mm (10 pcs) |
1 x | Pan Head Screw M2x6 PH |
1 x | Support Pitot JETI |
1 x | Socket Screw M3x9 mm |
1 x | Socket Screw M2x3 mm (4 pcs) |
1 x | Quicklock washer 1 mm (10 pcs) |
1 x | Screw M2.5x10 (10 pcs) |
1 x | Antonov AN2 Scale 1/6 - 3m |
1 x | SkyMaxx 1.550 mm (kit) |
1 x | Jodel D.9 BeBe 2.400 mm Kit |
|
4,561.45EUR |