1 x | PowerFuel RX V2 Fuel Pump |
1 x | PowerBox Smokepump JETs 2x outside |
2 x | JM electric Pump |
1 x | PowerBox Smokepump |
2 x | Electric Fuel Pump 12v |
1 x | Smoke pump RCEXL |
1 x | Variable Flow Smoke Pump System |
1 x | KAVAN Hand crank fuel pump |
3 x | Secraft Fuel system v2, red color |
1 x | Conector FESTO G1/8 Quick 4mm 90º |
1 x | FESTO connector M7 barb fitting XL Tygon |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Horn 6/20 with M3 Bearing |
1 x | Extension PVC 150 cm (Graupner) |
1 x | Ring 320 mm length (5 pcs) |
1 x | |
1 x | Copier 5x20 cm pcs |
1 x | Fresa corte diamante Ø 2.35mm (lentil) |
1 x | Digital precision scale up to 2000 g |
1 x | Aramid fibre shears Proton®, 21 cm / 8" length |
1 x | Dremel PERMAGRIT 18 mm round lime |
2 x | 25 mm Sandpaper file |
1 x | Extinguisher CO2 - 2 Kg |
1 x | M3 Maxi ball link (2 uds) |
2 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Red smoke canister 100 g |
1 x | Socket head ball link M3 (2 uds) |
1 x | White smoke canister 100 g |
2 x | Carbon fiber rod 20 mmx1000 mm |
1 x | Adapter lead MPX/EC3 |
1 x | "S" set for boats |
1 x | Tube Pitot to PIXHAWK |
1 x | Smoke set "Glider" |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Micro flex hinge (12 uds) |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | Z type of cable coupler Ø 1 (2 uds) |
1 x | Miniature brass strap hinge, 1 m |
2 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | Large flex hinge (12 uds) |
1 x | Ball Link ALU M3 - RH (1 pcs) |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | Ball link Aluminio M3 (2 pcs) |
1 x | Couple M4 for wire (10 pcs) |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
2 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | Kavan Car 25% nitro 1l |
1 x | 120x60 mm SLH KOVO wheel |
3 x | Bags BULL Mo1 2.6m "Luxe" |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
2 x | Tank BULL MØ1 3L+14L Smoke (CMJets) |
1 x | Marker ties (20 pcs) |
1 x | USB interface ALTIS |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | Blue aluminium servo arm V1-Hitec 1,5" inch M3 |
1 x | Interruptor RX/Batterie |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | CC 05 |
1 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
1 x | Receiver bed (Blue) |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
2 x | RX external cable for estandar receivers |
1 x | Baseplate servo |
4 x | RX cabel |
1 x | Y Cable |
2 x | Set transmisions BULL Mo1 (dura/aluminium) |
1 x | Pipa 3D BULL MØ1 2.600mm |
1 x | Tank BULL MØ1 4L (CMJets) |
1 x | Tank BULL MØ1 (3.2 L) + 1x (0.9 L) + 1x (0.9L Smoke) PRO |
3 x | GPS Expander Module |
2 x | Electric Landing Gear GS-200 BULL Mo1 2.6 (Elektron Retracts) |
2 x | 800TVL CMOS camera for FPV |
1 x | GPS Logger Dymond |
2 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Servo Mount S (red) |
1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
2 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
2 x | Servo Mount M (blue) |
1 x | Extension 2/3 lipos JST - JST/C |
1 x | Optical RPM Sensor |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Female connector for 6 pines AWG |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | Extension 5 lipos JST - JST/C |
1 x | Rudder 2_Tray 3~3.5 inch |
1 x | Male Prolonger TP 4/5S |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
2 x | Male connector JST SH 1.0mm with 10 cm wire |
1 x | PSC 5 |
1 x | Carbon fiber rod 16 mm x 1000 mm |
1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Release film 100 cm x 50 m |
2 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
2 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | 25 mm reinforced hinge |
1 x | Medidor ángulos y/o incidencias |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Angle of incidence meter |
1 x | Field folding model stand |
1 x | Surface Indicator Gauge Small |
1 x | Propeller balancer |
1 x | Propeller balancer |
1 x | Oracover Azul 2 m |
1 x | ORACOVER Ferrari red (2 m) |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Stickers-digit for marking |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | 15 mm reinforced hinge |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Pin hinge 34x16 mm (10 uds) |
1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
1 x | Strip 2,5x1,25x330 mm |
1 x | ABS Strip 1.0x4.0x1000 mm |
1 x | L-shaped servo mount |
1 x | Angle measurer |
1 x | Field folding model stand SebArt |
1 x | WingFix ULTRA Black Edition |
1 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | 6,4x1000 mm 2:1 black termoretract tube |
1 x | 6,4x1000 mm 2:1 green termoretract tube |
1 x | Monokote BLUE metalizado (1.8x0.65m) |
1 x | MYLAR film A350 (1000x500 mm) |
1 x | ABS Strip 1.5x6.0x1000 mm |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | ABS I Strip 20x10x1000 mm |
1 x | Round Rod 1,0x1000 mm |
1 x | Radial mount for electric 2.5-5.6 |
1 x | Wheel FEMA 100 mm / 6 mm |
1 x | SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm |
1 x | Wheel FEMA 82 mm / 5 mm |
1 x | A60-6XS V4 28-Pole |
1 x | Wheel FEMA 127 mm / 6 mm |
1 x | Compact on-board starting system (9512) |
1 x | Brake for 140 mm wheels |
1 x | Compact on-board starting system (9724) |
1 x | Wheel FEMA 140 mm / 6 mm |
1 x | ESC ALPHA 60A HV |
1 x | CC 11 Conector |
1 x | Quick hose connector 3-3 mm |
1 x | Motor holder AXI |
1 x | OS 37 SZ-H, Piston |
1 x | OS 37 SZ-H, Bulon piston |
1 x | Oracover Black 10 m |
1 x | Carbon fiber rod 1.0 mm x 1000 mm |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
1 x | DSM 10 Dual Switch Mixer |
1 x | DUPLEX 2,4GHz MRPM-AC EX |
2 x | Electric Landing Gear "Black Edition" BULL Mo1 2.6 GS200 (Electr |
1 x | Copier 2x20 cm pcs |
1 x | Futaba 52 mm servo arm |
1 x | Female connector for 10 pines AWG |
1 x | USB Mini Camera endoscope |
1 x | Rudder 2_Tray 4.5~5 inch |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | DUPLEX 2.4EX Central Box 210 |
2 x | Wing Joiner BULL MØ1 2.600mm |
1 x | Gyro 3-Ejes REFLEX V2 FMS |
1 x | Fuselage BULL MØ1 2.600mm |
1 x | Male connector for 20 pines AWG |
1 x | HITEC 20 mm servo arm with ball link |
1 x | Gates hinge |
2 x | DUPLEX 2.4EX Central Box 220 |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
1 x | Carbon plate 350x150x1.0 mm |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | Rudder 2_Tray 4~4.5 inch |
1 x | M3 Maxi ball link (2 uds) |
1 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | Battery RX JETI LiIon RB 3100 7.2v |
1 x | Black tray 2,4EX DC-16/14/24 black |
1 x | DUPLEX 2.4EX MU 3 Sensor |
1 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 |
1 x | Battery RX JETI LiIon RB 2600 7.2v |
1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
1 x | 2,0x50 mm allen screwdriver |
1 x | PowerBox OLED display |
1 x | Electric Landing Gear BULL Mo1 2.6 (Elektron Retracts) |
1 x | Canopy BULL MØ1 2.600mm |
1 x | Electric Landing Gear "Black Edition" BULL Mo1 2.6 (Elektron Re |
1 x | CC 03 |
1 x | XTorque CFK Servohebel 38 |
1 x | Female connector for 12 pines AWG |
1 x | SPARK Switch 12v |
1 x | Female connector for 20 pines AWG |
1 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
1 x | Futaba 38 mm servo arm with ball link |
1 x | Futaba 25 mm servo arm with ball link |
1 x | Hitec 20 mm servo arm |
1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
1 x | FX three-position switched channel, long |
1 x | DPSI Ampere battery backer |
1 x | Cabling for Fox MDM1 wings |
1 x | Male connector for 6 pines AWG |
|
24,366.70EUR |