1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | Buy Perforated film 100 cm / 10 m |
2 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | Buy Perforated film 100 cm / 50 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
1 x | Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re |
2 x | Adaptadores carga 6s JST-XH |
1 x | Crimping tool |
1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
2 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
2 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
4 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
3 x | Straightened rod Ø 5.0 mm x 1000 mm |
2 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Straightened threaded rod M3 - 1m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
2 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
2 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Universal Colour Paste white 50 g |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
2 x | Threaded coupler M2 (10 uds) |
1 x | Plasti Dip Liquid Tape 429 ml orange |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Spray adhesive AEROFIX 2 |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | 500 ml sealer (DOPE) |
2 x | Brass control horn M4 short for wire (10pcs) |
1 x | Horn 6/20 with M3 Bearing |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | RH long aluminium horn (2pcs) |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | Horn 6/27 with M3 Bearing |
2 x | Horn 5/10 with M2 Bearing |
2 x | 6 mm aluminium horn with patella |
1 x | Small aluminium horn blue (2pcs) |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Horn 6/35 with M3 Bearing |
3 x | Horn 16,5x20 mm (2 pcs) |
2 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Extension 15 cm (Futaba) |
1 x | 5 line servos wire black (1 m) |
2 x | White silicone 0,25 mm² wire (25 m) |
1 x | Cable S.BUS 3 salidas 300 mm |
1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
1 x | PVC 0,25 qmm servos wire Graupner (5 m) |
1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
1 x | Premium servo extension 50cm |
2 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
2 x | Black silicone 0,25 mm² wire (25 m) |
1 x | Futaba Female 40 cm extension |
2 x | Extension silicon 10 cm (Futaba) |
1 x | White silicone 0,25 qmm wire (150 m) |
1 x | PVC 0,08 qmm Graupner servos wire (5 m) |
1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | Extension 7.5 cm |
1 x | Cable Cargador FUTABA |
1 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
1 x | Futaba male 40 cm extension |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Extension silicon 100 cm (Futaba) |
1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
1 x | Premium servo extension 100cm |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | Silicone 0,35 qmm servos wire Graupner(100 m) |
1 x | Extension 90 cm (Futaba) |
1 x | Extension lead 15 cm Multiplex |
1 x | Premium servo extension 25cm |
1 x | Extension 100 cm (Futaba) |
1 x | Cable S.BUS 3 salidas 100 mm |
1 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
1 x | Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC |
1 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
1 x | Extension silicon 100 cm (Graupner) |
2 x | 200 mm extensión servo HITEC/JR |
1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
2 x | Silicone 0,50 qmm servos wire Graupner(100 m) |
1 x | Extension silicon 30 cm female (Graupner) |
1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
3 x | Extension silicon 10 cm (Graupner) |
1 x | Silicone 0,50 qmm servos wire Graupner(5 m) |
2 x | 1 m servo "Premium" wire (white/red/blue) |
1 x | JR silicone servo wire 0,35 qmm / 5m |
1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
1 x | Prolongador S-Bus JR/JR 10cm |
1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
1 x | 10m servo "Premium" wire (white/red/blue) |
1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
1 x | Connectors DEANS (T) |
1 x | MPX Sub-D Adaptor |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
1 x | 1/12 Pilot "Cougar" |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | Prop Shaft Adapter 8 mm/M12 "long" |
1 x | DUPLEX 2.4EX Central Box 210 |
1 x | Buy Perforated film 145 cm / 50 m |
2 x | Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs |
1 x | SINGLE FUELING VALVE GASOLINE MK2 SMALL |
2 x | Mould Resin P + Hardener EPH 161-P, kit/ 585 g |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey) |
1 x | Extension MPX-MPX 20 cm |
1 x | Oracover GREY Seafire Sea 2m |
1 x | Oracover light Grey 2m |
2 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Simulador RealFlight RF-9.5 S (sin emisora) |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
2 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Cable set Premium™ MAXI "one4two" |
1 x | Protective Cover for wires Ø 3 mm 1000 mm |
2 x | Vacuum bag, 1200 mm x 50 m |
2 x | Straightened threaded rod M2-1m |
2 x | Hardener Aero EPH 161 (250 g) |
2 x | 50m servo "Premium" wire (white/red/blue) |
1 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Styrene plate 320x120x1.0 mm |
1 x | Glass fibre sleeve Ø 20 mm X 10m |
1 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
1 x | Carbon plate 550x350x2.5 mm ECOTECH |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
2 x | Carbon Non-Woven, 240 g/m² 100 cm x 2m |
1 x | PVC grid diagonal 290x185x0.32 mm |
1 x | Pulley brass 12/2 (2 pcs) |
1 x | Chopped glass fibre strands 3 mm |
3 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
2 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | Teflon rollers 80 mm x 15 mm Diam. |
1 x | Pulley brass 4/1,5 (2 pcs) |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | Glass fibre sleeve Ø 20 mm |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 5 m |
1 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Colormatic 2K Soft fine putty white, 1 kg |
1 x | Pulley brass 2,5/1 (2 pcs) |
2 x | Peel ply 95 g/m² (plain weave) 20 mm x 100 m |
2 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | Peel ply 95 g/m² (plain weave) 100 mm x 100 m |
1 x | Horn with ball 55x40 |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | Long adjustable control horn with bearing |
1 x | Short adjustable control horn 3x24 |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | ABS tube 4.0x2.0x1000 mm |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | ABS tube 8.0x6.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | 3,2 mm Prop Adapter M5 |
1 x | Adapter 3,2 mm M6 for spinner 40 mm fixed propeller |
1 x | Adapter 3,2 mm M6 |
1 x | 4 mm Prop Adapter M6 |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Adapter 3,2 mm M8 |
1 x | 3 mm Short Prop Adapter M5 |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
1 x | 5 mm M2 variable inclined horn |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
1 x | Small aluminium horn gold (2pcs) |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Indoor hinge with servo arm integraded |
1 x | Rudder forward 80x28 "type Kato" |
1 x | 40,0 mm hydro-propeller (left hydropropeller) |
1 x | 33,0 mm propeller (rigth propeller) |
1 x | 75 mm |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 5 cell |
1 x | 10 mm dogdrive props |
1 x | Extension 30 cm (Futaba) |
1 x | Extension silicon 75 cm (Graupner) |
1 x | Fiberglass heat shield Ø 4 mm 1000 mm |
1 x | 6 mm Quick clamp_S (10 pcs) |
2 x | Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one |
1 x | Circlick securite |
1 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
1 x | Cable set PREMIUM , fuselage/wing one4one |
1 x | Metalic nose for PROJETI |
2 x | resin-hardener package L-385 with hardener H-385 (875 g) |
1 x | resin-hardener L-385 H-385 (5000 g) |
1 x | resin-hardener L-385 H-385 (625 g) |
1 x | Propeller Pleg CAM Carbon 10x4 |
1 x | Propeller CFK 15.5x10 |
1 x | Propeller CFK 16x16 Wide |
1 x | GM Propellers Folding propeller Scale 20x13 Carbon white 1 pair |
1 x | Propeller CFK 18x9 |
1 x | Propeller CFK 18x16 |
1 x | Propeller Pleg CAM Carbon 15x6 |
1 x | Charger ISDT 608AC 200W |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
2 x | Hardener P-25, canister 2.5Kg |
1 x | Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 675g |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
2 x | Epoxy Resin L (2.5 Kg) |
1 x | resin-hardener L-385 H-385 (1250 g) |
2 x | Hardener Aero EPH 161 (500 g) |
1 x | White gelcoat 1 Kg |
1 x | Mould Resin P 10 kg |
1 x | Extractor piñones 2.3/3.2 mm |
1 x | Propeller CFK 12.5x7 |
1 x | Propeller CFK 14x7 |
1 x | Propeller Pleg CAM Carbon 13x8 |
1 x | Propeller CFK 14.5x10 Slim |
1 x | Propeller Pleg CAM Carbon 14x7 |
1 x | Propeller CFK 14x10 |
1 x | Propeller RF CFK 10x17 |
1 x | Propeller Pleg CAM Carbon 15x13 |
1 x | Propeller RF CFK 14.5x14 |
1 x | Propeller Pleg CAM Carbon 11x6 |
1 x | GM Propellers Folding propeller Scale 20x13 Carbon 1 pair |
1 x | Propeller CFK 15x16 |
1 x | Propeller CFK 13x9 |
1 x | Propeller Pleg CAM Carbon 14x6 |
1 x | Propeller CFK 11x8 |
1 x | Propeller Pleg CAM Carbon 13x5 |
1 x | Propeller Pleg CAM Carbon 15x10 |
1 x | Propeller CFK 18,5x12 |
1 x | Propeller Pleg CAM Carbon 12.5x9 |
1 x | Propeller Pleg CAM Carbon 11x8 |
1 x | Propeller Pleg CAM Carbon 10x8 |
1 x | Propeller Pleg CAM Carbon 12x6.5 |
1 x | Propeller CFK 15x13 Slim |
1 x | Propeller Pleg CAM Carbon 10x6 |
1 x | Propeller CFK 20x13 "white" |
1 x | Propeller Pleg CAM Carbon 10x5 |
1 x | LASER 260 60" V2 ARF Yellow (SkyWing) |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Ball Bearing Oil 25 ml |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | ABS tube 14.0x10.0x1000 mm |
1 x | MULTIPLEX - TUNING SPINNER (67MM) FOR MULTIPLEX FUNRACER |
1 x | 20-25mm Servo Arm |
1 x | Pegamento Pu R 50g polyuretano |
1 x | 50 mm white plastic spinner for fixed propeller |
1 x | 45 mm black plastic spinner for fixed propeller |
1 x | Spinner fixed propeller 42 mm / 5,0 mm |
1 x | UHU hart 35 g |
1 x | Spinner plastic white fixed propeller 42 mm |
1 x | Carbon plate 550x350x3.0 mm ECOTECH |
1 x | Z type of cable coupler Ø 1 (2 uds) |
1 x | Sheet Depron Aero 1250x800x3 mm |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Epoxy SLOW-CURE™ 30 min (130g) |
1 x | Adjustable brass horn threaded M3 |
1 x | White smoke bombs AX-18 (5 pcs) |
1 x | "M" set |
1 x | Parachutist |
1 x | Yellow smoke canister 100 g |
1 x | Green smoke canister 65 g |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | Piston ring for ZG 20 and G240RC |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Carburetor for ZG45SL and ZG62/S/SL |
1 x | PH6 adapter for 6mm M10 AXI for AXI41xx |
1 x | Reed valve for DA-60/70 |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
1 x | Extension silicon 75 cm (Futaba) |
1 x | Yellow silicone 0,5 qmm wire (50 m) |
1 x | Silicone black 6,0 qmm wire (25 m) |
1 x | Silicone black 1,5 qmm wire ( 1 m) |
1 x | Silicone black 1,5 qmm wire ( 25 m) |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell |
1 x | 40 mm white plastic spinner for fixed propeller |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | 290 mm M5 Prop shaft |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | Turnbuckle M1,6x17/27 (2pcs) |
1 x | Fiberglass plate 350x150x4.0 mm |
1 x | Fiberglass plate 620x540x2,0 mm |
1 x | Round Rod 1.0x3.5 cm |
1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
1 x | Carbon plate 550x350x1.5 mm ECOTECH |
1 x | Fiberglass plate 350x150x2.5 mm |
1 x | Threaded coupler M2,5 (10 pcs) |
1 x | Foam plastic plates (310x210x2 mm) |
1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | Cyano INSTA - CURE™ Pocket (18g) |
1 x | Cyano ULTRA - CURE™ (21g) |
1 x | Cyano INSTA - CURE+™ (56g) |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | 20 mm carbon horn |
1 x | Horn mando long (2 pcs) |
1 x | "S" set for planes |
1 x | 3l Smoke oil |
1 x | Red smoke canister 65 g |
1 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | White smoke bombs AX-60 (5 pcs) |
1 x | Parachute expulsion foam |
1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
1 x | Green smoke canister 140 g |
1 x | Green smoke canister 100 g |
1 x | Ventral support for AX-18/AX-60 |
1 x | PCARD Wireless System |
1 x | Remote electric ignition system |
1 x | B4-0 rocket charges (6 pcs) |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | 3,9 mm ZG20-ZG38 servo arm |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Covered closure or fairings |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 54 mm |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | DA 85 / DA 100 / DA 100 L carburetor |
1 x | Tip wing protector 30x10 (2 pcs) |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Miniature brass strap hinge, 1 m |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Carburador DA-35, DA-50R-DA-100L , VM-60/70 |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | BOSCH spark plug cap for DA 50-R, DA 100 and DA 150 |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 72 mm |
1 x | Piston ring for ZG 26SC/EI, ZG 26SCM ZG 26SLH and Zenoah G260RC/ |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 36 mm |
1 x | Motor Mount for TITAN ZG38/38S/38SC, length 36 mm |
1 x | Cylinder for ZG20 |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Spring Clip Ø25 mm |
1 x | Spring clamp for tube Ø50 mm |
1 x | Piston ring for DA-50R and DA-100 |
1 x | HITEC 17 mm servo arm with ball link HITEC |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
1 x | Futaba 17 mm servo arm with ball link HITEC |
1 x | Rudder forward 70x28 "type Kato" |
1 x | Hitec 25 mm servo arm with ball link |
1 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
1 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell |
1 x | Silicone red 0,25 mm² wire (25 m) |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | Silicone red 4,0 qmm wire ( 1 m) |
1 x | Silicone black 6,0 qmm wire ( 1 m) |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
1 x | XPower H PROP HUB Ø6.0/42.5mm 0º |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | Propeller Pleg CAM Carbon 9x7 |
1 x | Spinner Alumin. propeller pleg. 40 mm / 3,0 mm |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 6 cell |
1 x | 30 mm Alu spinner 3 mm pleg. propeller |
1 x | White Fold Prop Spinner 38 mm / 5 mm shaft / 8 mm propellers |
1 x | MEKP Harderner 100 g |
1 x | Spinner propeller pleg. 30 mm / 3,2 mm |
1 x | Spinner propeller pleg. 30mm axle 3,0 mm |
1 x | Conector MR-60 (pareja) |
1 x | Aluminum Fold Prop Spinner 30 mm / 5.0 mm |
1 x | Aluminum Fold Prop Spinner 34 mm / 3 mm |
1 x | 1/6 Pilot "Tony" |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
|
16,344.81EUR |