1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Cockpit plastic closing |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Steering arm 12 mm Ø 4 mm |
2 x | Cierre cabina aluminio Ø4, I=10 mm |
2 x | SUS wire 3m (nylon coated) |
2 x | Stainless steel cable Ø 1.3 mm (10 m) |
2 x | Screw-lock connector Ø 2 mm (2 uds) |
2 x | Steering arm 16 mm Ø 3 mm |
1 x | Covered closure or fairings |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | EXTRA NG 74" white/red/blue (Skywing RC) |
1 x | Conector MR-60 (pareja) |
1 x | Adaptadores carga 6s JST-XH |
1 x | Starter EM Gear Power 80 |
1 x | Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re |
1 x | Extractor piñones 2.3/3.2 mm |
1 x | Xplorer3 anemometro |
1 x | Small pinned hinge (12 uds) |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
3 x | Flap hinge (6 pcs) |
2 x | Gates hinge aluminium (1 pcs) |
2 x | Micro flex hinge (12 uds) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
2 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
2 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
4 x | 15 mm reinforced hinge |
2 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
2 x | Nylon hinge 20x15x0,3 (10 pcs) |
2 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
2 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
2 x | Motor A2212/13T |
2 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Z type of cable coupler Ø 2 (2 uds) |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
2 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
2 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
3 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Threaded coupler M3 (10 uds) |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
2 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
1 x | Connectors banna gold 5,5 mm (M/F) |
1 x | Conector BEC male (10 pcs) |
1 x | XH female balance (3S) connector (2 pcs) |
1 x | Connectors banna oro 3,5 mm (M/F) |
1 x | XH female balance (5S) connector (2 pcs) |
2 x | Connectors DEANS 4 pins (1 pair) |
1 x | 2 mm male connector (2 pcs) with safety connector |
1 x | Gold antispark 5,5 mm plug |
1 x | XH male balance (5S) connector (2 pcs) |
1 x | Conector Servo female 4 pines |
1 x | Optotronix Aurora Plug |
1 x | XH male balance (3S) connector (2 pcs) |
1 x | Connectors banna oro 6,0 mm (M/F) |
1 x | XH male balance (2S) connector (2 pcs) |
1 x | 2 mm female connector (2 pcs) with safety connector |
1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
2 x | XH male balance (4S) connector (2 pcs) |
1 x | Connector CAN 15 |
1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
1 x | XH female balance (2S) connector (2 pcs) |
1 x | Connectors banna oro 3 mm (M/F) |
1 x | Connectors banna oro 4 mm (M/F) |
1 x | MPX Sub-D Adaptor |
1 x | XH female balance (4S) connector (2 pcs) |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Futaba Female 40 cm extension |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
1 x | Spannlack 1000 ml |
1 x | Propeller POWER-PROP 15x10 |
1 x | Propeller electric carbon 9.5x7 |
1 x | Propeller electric carbon 10x7 |
1 x | Cockpit aluminium closing 5.4g |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Ply-Span 450x600/13g Yellow |
1 x | Split M1,2x10 (10 pcs) |
1 x | Propeller POWER-PROP 13x9 Izda |
2 x | DUPLEX 2.4EX Central Box 210 |
1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
1 x | Propeller POWER-PROP 14x9 |
1 x | Motor SAITO FG-61 TS |
1 x | LA500 pilot-seat set |
3 x | Xplorer1 anemometro |
1 x | Xplorer4 anemometro |
1 x | LA500 housing-lower cyclic |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Nut M2 |
2 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Balls 4 mm |
1 x | Cierva C30 Elevator |
1 x | Servo GO-1013 MG 3.8kg |
1 x | Servo DITEX TD2612S |
1 x | Turbina KINGTECH K320 G5 |
1 x | Servo GO-1053 MG 20.0kg |
1 x | Servo GO-12S70MG 20.5kg.cm 0.06s/60º |
1 x | Servo GO-1053MG 20 kg.cm 0.17s/60º |
1 x | Servo DITEX EL0510M |
1 x | Crimping tool |
1 x | Servo GO-13 MG 13g 2.8 Kg 0.12s/60º |
1 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
1 x | Glases Aspen |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
2 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Set clevis for pull-pull (TY13233 & TY13234) |
2 x | 18 mm reinforced hinge |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Pulley brass 4/1,5 (2 pcs) |
1 x | Stainless steel 3 m Pull-Pull complet set (max 20 kg) |
4 x | Long pinned hinge (12 uds) |
1 x | Turnbuckle M2x29/43 (2pcs) |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Porta Kwik link M4 3 mm (2 pcs) |
2 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
2 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
1 x | KIRA 600-20 6,7:1 |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | KIRA 600-16 |
1 x | 80 mm rods set for direction control |
1 x | KIRA 600-17 |
1 x | 45 mm rods + T patellas set for direction control |
2 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
1 x | PYRO 800-40 Long Axi |
1 x | KIRA 500-26 6,7:1 |
1 x | Turnbuckle M2,5x32/48 (2pcs) |
1 x | Miniature brass strap hinge, 1 m |
3 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Cable coupler M2 (10 uds) |
2 x | Cable coupler M3 (10 uds) |
1 x | Pulley brass 6/1,5 (2 pcs) |
1 x | Round flex hinge (12 uds) |
2 x | Long pinned hinge (6 uds) |
1 x | wire tensioner (red) |
2 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Turnbuckle M1,6x20/30 (2pcs) |
1 x | Large flex hinge (12 uds) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Pull-Pull complet set with CF rudder double servo arm |
1 x | Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Threaded coupler M2,5 (10 pcs) |
1 x | 25 mm reinforced hinge |
1 x | XT60 Connector with Holder Male 2pcs |
1 x | Protector Connector MPX (1 pair) |
1 x | XH male balance (6S) connector (2 pcs) |
1 x | MR30 connector male |
1 x | MPX screwable clips (5 pcs) |
1 x | Jet Afterburner Simulator NF-Jet3 RYS |
1 x | LED wire (green - 2pcs) |
1 x | Connectors MPX black male |
1 x | Connectors DEANS (T) micro |
2 x | 8Wx2 Navigation & Strobe, 11mm Red/White |
1 x | NF-3X-80 liner Kit |
1 x | Bag connector 2 mm |
1 x | Jet Afterburner Simulator NF-Jet3 YSW |
1 x | XH female balance (6S) connector (2 pcs) |
1 x | NF-3m Heli Kit |
1 x | Electromagnets brake |
1 x | Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm) |
3 x | A/C quality beech plywood 600x300x6.0 mm |
2 x | Waterproof adhesive tape, width 19mm, length 25m |
2 x | Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min) |
2 x | Wing Joiner ULTIMATUM 2.0 m |
1 x | ULTIMATUM 2.0 m white |
2 x | ULTIMATUM 2.0 m red/black |
1 x | ULTIMATUM 2.0 m Red Bull |
1 x | ER40eVo set B (20 Kg) |
1 x | Electric Landing Gear GS-200 ULTIMATUM 2.0 (Elektron Retracts) |
1 x | Electron 22 mm Fitting barb |
1 x | Electric Landing Gear ULTIMATUM 2.0 (Elektron Retracts) |
1 x | VIPER 1.7 Electric break wheels + structure |
1 x | 15x7 tree blades propeller LEFT |
1 x | VIPER JET G2 Esq. 5 Green/White/Blue |
1 x | Brake disc Electron Retracts |
1 x | ER-50eVo Set A [2x ER50 + RB-45] |
1 x | A50 Backmountset complete |
1 x | Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm |
1 x | A40 Backmountset complete |
1 x | Esc MasterBasic 55SB |
1 x | DUPLEX 2,4EX Stick with Potentiometer for Transmitter DC/DS |
1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
1 x | Cable coupler M2x66 (2 uds) |
1 x | Couple M4 for wire (10 pcs) |
1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Extinguisher CO2 - 2 Kg |
1 x | Axle for motor A50-L |
1 x | Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm |
1 x | A30-M/L/XL Backmountset complete |
1 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
1 x | Bearings for motors hacker A50 |
1 x | Axle for motor A20-S (3 uds) |
1 x | LA500 rotor head core |
1 x | Backmountset complete A40 |
1 x | A60 Motor Mount Alu complete set |
1 x | Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm |
1 x | LA500 Blades |
1 x | LA500 ciclic lever |
2 x | LA500 tail empennage |
1 x | LA500 pre-rotation gear |
1 x | Esc MasterBasic 70SB |
1 x | Screw-lock connector M2 (2 uds) |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Z type of cable coupler Ø 1 (2 uds) |
1 x | Ball link Aluminio M3 (2 pcs) |
1 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
1 x | LA500 Autogyro |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Pulley brass 5/1,5 (2 pcs) |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Pulley brass 14/2 (2 pcs) |
1 x | Porta Kwik link M3 3 mm (2 pcs) |
1 x | Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo |
1 x | Servo HITEC HS-5087 MH |
1 x | Charger SKY RC e680 |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
2 x | Indoor hinge with servo arm integraded |
1 x | Small flex hinge (12 uds) |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | Servo HITEC HS-45 HB, servo box |
1 x | Servo HITEC HS-125 MG |
1 x | Servo HITEC D625 MW |
1 x | Servo lock HS-80/81/82/85 (2 pcs) |
1 x | Servo HITEC HS-5084 MG |
1 x | HITEC DPC-11 programmer |
1 x | Servo HS-5070 MH Hi Volt |
1 x | Pin hinge 39x20 mm (10 uds) |
1 x | Gates hinge |
1 x | Medium pin type hinge (12 uds) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Dremel PERMAGRIT 18 mm round lime |
1 x | Suncover 100cc Red |
1 x | Sun Cover PC 21 XXL (JMB Jets) |
1 x | Servo HITEC HS-485 HB |
1 x | Pin hinge 34x16 mm (10 uds) |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | ULTIMATUM 2.0 m green/black |
2 x | ZEUS F3A 2m |
1 x | SAITO FG-120 TSS Boxer 4T |
1 x | Electric Landing Gear ULTIMATUM 3.0 (Elektron Re |
1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
1 x | Combo KAVAN C3536-1250 + KAVANA R50SB + |
2 x | 20-25mm Servo Arm |
2 x | Ball Bearing Oil 25 ml |
1 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
2 x | Lipo KAVAN 5000 mAh 11.1v 40/80C |
1 x | ANGEL 48" pp red/blue/white |
1 x | LASER 260 60" V2 ARF Yellow (SkyWing) |
1 x | Oracover light Grey 2m |
1 x | Prop Holder AXI 41xx V2 |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | Pilatus PC-21 50E BLUE/WHITE (SebArt) |
1 x | PowerBox MicroSwitch |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | 16mm Gear-Spotlight, 4W |
1 x | Set luces Airliner 2.1m Wingspan Scale 1:14 Civil/Sport |
1 x | 8Wx2 Navigation & Strobe, 11mm, T-Fuse Red/White |
1 x | Lense for Spotlights, 20mm |
1 x | 3x8W Triple-Spotlight, 12mm, T-Fuse White |
1 x | 4Wx2 Power Navigation Light, 13mm, T-Fuse White |
1 x | 8Wx2 Navigation & Strobe, 11mm Green/White |
1 x | 8Wx2 Gears-Spotlight, UltraPower, 20mm White |
1 x | ULTIMATUM 2.0 PRO "Full Carbon Red" |
1 x | Bungee HLG Premium |
1 x | Mobile Terminal |
1 x | Battery charging cable XT60 |
1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
2 x | Servo GO-1023MG 7.0 kg.cm 0.09s/60º |
1 x | Motor KAVAN PRO 2225-1600 |
1 x | DC24 II Transmitter case insert |
1 x | DUPLEX case for Jeti DS handheld transmitter |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
|
50,230.95EUR |