2 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Buy Perforated film 100 cm / 20 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | Buy Perforated film 100 cm / 50 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Buy Perforated film 100 cm / 10 m |
1 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | 1/12 Pilot "Langley" |
2 x | 1/12 Pilot "Tom" |
2 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | Pilot JAN 1/4 Saiplanes |
1 x | 1/6 Pilot "Cindy" |
1 x | 1/7 Pilot "Japanese" |
2 x | 1/12 Pilot "Cougar" |
2 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Horn 5/15 with M2 Bearing |
1 x | 20 mm carbon horn |
1 x | Cable with accesories |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Horn with ball 40x30 |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Cable control set |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Horn for flap control (1 pcs) |
1 x | Horn 6/20 with M3 Bearing |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | Horn 6/27 with M3 Bearing |
1 x | Horn 5/20 with M2 Bearing |
1 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | RH long aluminium horn (2pcs) |
1 x | Horn 6/35 with M3 Bearing |
3 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
2 x | |
2 x | Presto SF Light Filler styrene-free (420 g) |
2 x | Plasti Dip Liquid Tape 429 ml orange |
2 x | Spray EC Red 400ml |
3 x | Solvent Plasti Dip 1000 ml |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
3 x | Paint gun for sprays |
1 x | SE Ring 330 mm (4 pcs) |
2 x | SE Ring 350 mm (2 pcs) |
1 x | SE Ring 250 mm (2 pcs) |
1 x | 20x200 mm battery rings |
2 x | SE Ring HACKER 300 mm (2 pcs) |
2 x | 500 ml sealer (DOPE) |
2 x | Plasti Dip Liquid Tape 429 ml black |
2 x | Spray YELLOW Inca Lexan 150ml |
2 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
2 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
2 x | SE Ring 240 mm (2 pcs) |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
3 x | Universal Colour Paste deep black 50 g |
2 x | Partall paste 650 g |
2 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
2 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
2 x | Plasti Dip Liquid Tape 429 ml black |
2 x | Silicone adhesive ELASTOSIL® E4, tube/ 90 ml |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | CC 02 |
1 x | Glases Stratus |
1 x | Buy Perforated film 145 cm / 50 m |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | 2 mm Prop Adapter M6 |
1 x | Tirpiz Battleship 1:200 |
2 x | Propeller diller for DLE111 and DA85-150 |
2 x | Propeller diller for EME35 and DLE35 |
1 x | Alfileres de cobre 0,7 x 7 mm, aprox.50 g |
1 x | 3,2 mm Prop Adapter M6 |
1 x | Stick coupler Ms 15 mm |
1 x | 2,3 mm Prop Adapter M6 |
2 x | Propadapter for motor A60-V2 |
1 x | SCHARNHORST Battleship 1:200 |
1 x | 5 mm Prop Adapter M6 |
1 x | Recessed MPX connector support (6 pcs) |
1 x | Bujia OS G5 gasolina |
1 x | Support pump Xicoy X45 |
1 x | Extension Arm for Carburetor (red) |
1 x | Spark motor OS nº 3 |
1 x | Adapter lead MPX/EC3 |
1 x | Suction funnel for carburetor WALBRO 20-80cc (blue) |
2 x | Spray adhesive INFUTAC (Clear) 500 ml |
2 x | Spray Graphit 33 |
1 x | Suction funnel for carburetor 90D-L (red) |
1 x | Support XT60 conector (2 pcs) |
1 x | Sun Cover PC 21 XXL (JMB Jets) |
1 x | Piloto JET 1:3,5 |
1 x | 1/4 Pilot "Mike" |
1 x | 1/6 Pilot "John" |
1 x | 6,4x1000 mm 2:1 red termoretract tube |
1 x | 4,8x1000 mm 2:1 red termoretract tube |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
2 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
2 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Carbon fiber rod 1.0 mm x 1000 mm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | SE Ring 360 mm (2 pcs) |
1 x | 1/6 Pilot "Garry" |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | 1/10 Pilot "Jack" |
1 x | Long adjustable control horn 3x34 |
2 x | Hobbylite Filler, Balsa colour |
2 x | PARTALL® Hi-Temp Wax, 340 g |
2 x | Spray adhesive AEROFIX 2 |
1 x | Xplorer4 anemometro |
1 x | 2,4x1000 mm 2:1 red termoretract tube |
3 x | USB Mini Camera endoscope |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
2 x | Foam wheel Ø 38 mm (2 pcs) |
1 x | Reductora IPS 150 DX2BB-FXCS 11,8:1 |
2 x | Cooler motor type 300 |
2 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Xoar Electric Beechwood Prop 24x8 |
1 x | Pick up DA50/100/150 |
1 x | Reed valve for DA 50-R |
2 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
2 x | Cooler motor type 280 |
1 x | Propeller 9x4,7 SlowFlyer |
1 x | Propeller 10x4,7 SlowFlyer |
2 x | Propeller 3x2 |
1 x | 76 mm light wheels (2 pcs) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Piston ring for ZG 26SC/EI, ZG 26SCM ZG 26SLH and Zenoah G260RC/ |
1 x | Piston ring for ZG 20 and G240RC |
1 x | Xoar Electric Beechwood Prop 22x10 |
1 x | GLOW 9C + accesories |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 54 mm |
1 x | Propeller diller for DLE170 |
1 x | 36 mm white plastic spinner for fixed propeller |
1 x | Spinner plastic black fixed propeller 30 mm |
2 x | Actuador lineal HLS12-100210-7.4v |
1 x | Propeller diller for DA50, DLE55 red |
1 x | 50 mm white plastic spinner for fixed propeller |
1 x | 36 mm black plastic spinner for fixed propeller |
1 x | 42 mm black plastic spinner for fixed propeller |
1 x | Carbon fiber rod 14 mmx1000 mm |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Cinta Goldfix 1m |
1 x | Tape GFK 25 mm |
1 x | Foil for sticking flaps and ailerons |
1 x | Tape GFK 50 mm |
1 x | Wheel FEMA 178 mm / 8 mm |
1 x | Wheel FEMA 165 mm / 8 mm |
1 x | Wheel FEMA 152 mm / 8 mm |
1 x | Wheel FEMA 90 mm / 6 mm |
1 x | Adaptador equilibrador HITEC (XH) |
1 x | Magnetic Interruptor MULTIPLEX |
1 x | Support hands Issuer PROFI TX |
1 x | FunCub NG verde RR |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | Carbon fiber rod 16 mm x 1000 mm |
1 x | SE Ring 480 mm (2 pcs) |
1 x | Landing gear axle Ø 6 mm (2 uds) |
1 x | 150 Newtons FEMA absorber |
1 x | Z-shaped servo mount |
1 x | Set freno para ruedas Dia. 127 mm |
1 x | Wheel FEMA 70 mm / 5 mm |
1 x | Wheel FEMA 140 mm / 6 mm |
1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
1 x | Compact on-board starting system (9525) |
1 x | Restrictor FESTO 3/3 mm |
1 x | Servo arm with 6 mm hole to FEMA 9800A |
1 x | Landing gear axle Ø 8 mm (2 uds) |
1 x | FEMA DEFLECTOR LEVER FOR WHEEL BRAKE, |
1 x | 400 Newtons FEMA absorber |
1 x | Compact on-board starting system (9715) |
1 x | Servo arm with 4 mm hole to FEMA 9810A |
1 x | Gearwheel 9724/09 for ZG 45 |
1 x | Servo holder for retract |
1 x | Compact on-board starting system (9724) |
1 x | Brake for 140 mm wheels |
1 x | Compact on-board starting system (9713) |
1 x | 300 Newtons FEMA absorber |
1 x | USB Charger 120-240V AC |
1 x | LENTUS Multiplex Propeller 8x6 |
1 x | Interruptor SAFET-SWITCH 12HV Twinbatt |
1 x | LENTUS RR 3.000mm MULTIPLEX |
1 x | Spinner 42 mm EXTRA 330SC |
2 x | Spannlack 1000 ml |
2 x | Painting GHT Lexan Black 150 ml |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 675g |
1 x | Foam wheel Ø 351 mm (2 pcs) |
1 x | Cooler motor type 150 |
1 x | Propeller 8x4 Electric |
2 x | Propeller 3x3 |
1 x | GPS V2 Sensor for M-LINK receivers |
1 x | |
1 x | Power MULTIlight |
1 x | CHALLENGER Indoor |
1 x | 1000 ml sealer (DOPE) |
1 x | 20 g tin paste |
1 x | Release wax 250ml |
1 x | Mould Resin P 10 kg |
1 x | MEKP Harderner 100 g |
1 x | Hardener Aero EPH 161 (500 g) |
1 x | Universal Colour Paste deep black 250 g |
1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
1 x | Universal Colour Paste white 50 g |
1 x | |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
1 x | Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g |
1 x | resin-hardener package L-385 with hardener H-385 |
1 x | Epoxy Resin L + Hardener CL (60 min) kit/ 930 g |
1 x | Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg |
1 x | Mould Resin P + Hardener EPH 161-P, kit/ 585 g |
1 x | Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l) |
1 x | RX cabel |
1 x | Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l) |
1 x | GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l) |
2 x | Retract undercarriage |
1 x | Propeller 11x4,7 SlowFlyer |
2 x | Propeller 8x4,3 SlowFlyer |
1 x | Propeller 9x7 SlowFlyer |
1 x | Cooler motor type 400 |
1 x | Reductora IPS 150 DX2BB-DXCS 9,7:1 |
|
10,393.71EUR |