| 1 x | BALSA triangular 10x10x1000 mm |
| 1 x | Profile ABS Square 3 x 1000 mm |
| 1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
| 2 x | Profile ABS half cane 2.0x1000 mm |
| 1 x | Pine wood slat 10x10x1000 mm |
| 1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
| 1 x | ABS tube 3.0x2.0x330 mm |
| 1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | ABS angle 1.5x1.5x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
| 2 x | T-Connector 4.0 mm x 1000 mm |
| 1 x | ABS tube 12.0x10.0x1000 mm |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | Pine wood slat 3.0x5.0x1000 mm |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | ABS tube 4.0x3.0x1000 mm |
| 1 x | U Profile ABS 8,0x4,0x1000 mm |
| 1 x | ABS angle 2,0x2,0x1000 mm |
| 1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | ABS tube 9.0x8.0x1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
| 1 x | ABS angle 3,0x3,0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
| 1 x | Profile ABS half cane 3x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | U Profile ABS 2,0x4,0x1000 mm |
| 1 x | ABS tube 14.0x10.0x1000 mm |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | ABS tube 7.0x6.0x1000 mm |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | L-Connector 1.0 mm x 1000 mm |
| 1 x | ABS tube 9.0x7.0x1000 mm |
| 2 x | Liston HAYA 3 x 10 x 1000 mm |
| 1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
| 1 x | ABS tube 6.0x4.0x1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
| 1 x | U Profile ABS 3,0x6,0x1000 mm |
| 1 x | ABS "T" angle 8.0x8.0x1000 mm |
| 1 x | Pine wood slat 5.0x5.0x1000 mm |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | ABS tube 20.0x18.0x1000 mm |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | Profile ABS Square 1 x 1000 mm |
| 1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
| 2 x | ABS angle 6,0x6,0x1000 mm |
| 1 x | ABS tube 6.0x5.0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
| 1 x | ABS tube 18.0x16.0x1000 mm |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
| 1 x | ABS "T" angle 4.0x4.0x1000 mm |
| 1 x | Liston HAYA 8 x 8 x 1000 mm |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | ABS "T" angle 10.0x10.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
| 1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
| 2 x | ABS angle 10,0x10,0x1000 mm |
| 1 x | ABS tube 7.0x5.0x1000 mm |
| 1 x | ABS tube 5.0x3.0x1000 mm |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | Profile ABS half cane 2.5x1000 mm |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | 4 LiPo XH>EH adapter |
| 1 x | 5 LiPo XH>EH adapter |
| 1 x | BEC 3A FOXY |
| 1 x | Ferrita con funda |
| 1 x | 3 LiPo XH>EH adapter |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | Ferrita 17x10x6.5 mm |
| 1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 1 x | CC 02 |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | 30 cm BEC cable (male) |
| 1 x | Adapter lead MPX/EC3 |
| 1 x | Cabel charger transmitter GRAUPNER |
| 2 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | TP/TopFuel - XH 2/3S Adapter |
| 2 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | Ferrita 14x8x5.5 mm |
| 1 x | Carbon fiber flat 1000x6.0x0.8 mm |
| 1 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | Carbon fiber rod 12 mm x 1000 mm |
| 1 x | Carbon fiber rod 6.0 mmx1000 mm |
| 1 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 1 x | Carbon fiber rod 2.0 mmx1000 mm |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 2 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 1 x | Civilian pilot "Joe" size 9cm (Slimline) |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | Pins M connect Multipin connectors AWG 20-24 |
| 1 x | PSC 5 |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | Fail Safe air retract |
| 1 x | wing/fuselage connector for 16 pines AWG 20-24 |
| 1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | Connector CAN 15 |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Circlick securite |
| 1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
| 1 x | 30 cm BEC cable (female) |
| 1 x | Extension 2/3 lipos JST - JST/C |
| 1 x | Connector Sub-D 2+5 Female |
| 1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
| 1 x | Tip wing protector 28x10x12 (2 pcs) |
| 1 x | Snap pin for micro clevis (10 uds) |
| 1 x | Motor mount class 48" |
| 1 x | Allen wheel collar M4x4 |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | Cockpit plastic closing |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | Control for forward wheel (MINI) |
| 1 x | Cockpit latch closing I=10 mm |
| 1 x | Split pin 1x8 mm (10 uds) |
| 1 x | Snap short M2 (10 uds) |
| 1 x | Cockpit aluminium closing 5.4g |
| 1 x | Cable grommet Ø 5 mm (4 uds) |
| 1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Pushrod octagone 4/3 |
| 1 x | Tip wing protector 40x14 (2 pcs) |
| 1 x | Cable grommet Ø 6.4 mm (4 uds) |
| 1 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
| 1 x | Mini-Pix Esc 15 Amp |
| 1 x | Canopy Latch |
| 1 x | Allen wheel collar M4x6 |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 1 x | Pushrod octagone 4/3 with coupler M3 |
| 1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
| 1 x | Profile ABS Square 2 x 1000 mm |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | Rubber profile 8-2 mm 2M |
| 1 x | Profile ABS Square 4 x 1000 mm |
| 1 x | Round Rod 2,5x1000 mm |
| 1 x | Strip 2,5x1,25x330 mm |
| 1 x | Round Rod 1,0x1000 mm |
| 1 x | Round Rod 4,0x1000 mm |
| 1 x | Wing bolts M6 Steel screw Red (2 pcs) |
| 1 x | Allen wheel collar M3x5 |
| 1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | Landing gear frontal support 25x32x16 |
| 1 x | 38x4,5 mm wires output (2 pcs) |
| 1 x | 45 mm rods set for direction control |
| 1 x | Triple rod con. 2mm Pushrod (2 pcs) |
| 1 x | Tip wing protector 30x10 (2 pcs) |
| 1 x | Swing 1000 |
| 1 x | Cable grommet Ø 4 mm (4 uds) |
| 1 x | Landing gear frontal support 29x26x13,5 |
| 1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
| 1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
| 1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
| 1 x | Wheel collar 6 mm Ø (4 uds) |
| 1 x | Allen wheel collar M3x3 |
| 1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | Clip mini fixing for wing (2 pcs) |
 |
| 1,126.55EUR |
under request
temporarily out of stock
few units
