| 3 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | Cap Hispano Aviación |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | Pine wood slat 10x10x1000 mm |
| 2 x | BALSA triangular 8x8x1000 mm |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 2 x | Pine wood slat 5.0x5.0x1000 mm |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | Pine wood slat 6.0x6.0x1000 mm |
| 2 x | Liston HAYA 8 x 8 x 1000 mm |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 2 x | Beech dowels 10 mm x 1000 mm |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | Liston HAYA 3 x 10 x 1000 mm |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 2 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | Shirt Hispano Aviación |
| 1 x | Softshell Hispano Aviación |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | Vest clothes Hispano Aviación |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 1 x | Screw-lock connector M2 (2 uds) |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | SUS wire 3m (nylon coated) |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
| 1 x | Silicone 0,35 qmm servos wire Graupner(100 m) |
| 1 x | Black silicone 0,25 mm² wire (25 m) |
| 2 x | Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC |
| 1 x | PVC 0,08 qmm Graupner servos wire (5 m) |
| 1 x | White silicone 0,25 qmm wire (100 m) |
| 1 x | 100m servo "Premium" wire (white/red/blue) |
| 1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
| 1 x | White silicone 0,25 mm² wire (25 m) |
| 1 x | Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC |
| 1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
| 1 x | 1 m servo "Premium" wire (white/red/blue) |
| 2 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
| 1 x | Silicone 0,50 qmm servos wire Graupner(100 m) |
| 1 x | JR silicone servo wire 0,35 qmm / 5m |
| 1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
| 1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
| 1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
| 1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
| 2 x | PVC 0,35 qmm servos wire Graupner (100 m) |
| 1 x | White silicone 0,25 qmm wire (150 m) |
| 1 x | Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC |
| 1 x | Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC |
| 1 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
| 1 x | Truck-trailer for gliders 720 x 285 mm |
| 1 x | Field folding model stand SebArt |
| 1 x | Medidor ángulos y/o incidencias |
| 1 x | Ball link M3 (6 uds) |
| 1 x | ARTIST 1.560 mm |
| 1 x | Xplorer4 anemometro |
| 1 x | Hovercraft sailcloth |
| 1 x | Green smoke canister 140 g |
| 1 x | "M" set |
| 1 x | Motor DLE 200cc Premium Muffler |
| 1 x | Carbon fiber rod 1.0 mm x 1000 mm |
| 1 x | Soporte grifo FESTO vertical (1 pcs) |
| 1 x | GPS, Vario and altitude Sensor SBS-01G |
| 1 x | BALSA trip 10x10x1000 mm |
| 2 x | BALSA triangular 6x6x1000 mm |
| 2 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 2 x | DPSI OCP Overload protection |
| 1 x | DPSI RV Mini 6 Magic |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | DPSI RV Mini 6 (2008) |
| 1 x | DPSI Micro SingleBat 5.9V/7.2V magnetic switch |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | DUPLEX 2.4EX Central Box 210 |
| 1 x | DUPLEX 2.4EX Central Box 320 |
| 1 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 1 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 1 x | Wheel collar 2 mm Ø (4 uds) |
| 1 x | Triple rod con. 2mm Pushrod (2 pcs) |
| 1 x | Wheel collar 3.5 mm Ø (4 uds) |
| 1 x | Split pin 1x8 mm (10 uds) |
| 1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 1 x | Wheel collar 4 mm Ø (4 uds) |
| 1 x | Tip wing protector 40x14 (2 pcs) |
| 1 x | Servo FUTABA S 9670 SV |
| 2 x | Servo FUTABA BLS 276SV |
| 1 x | Servo FUTABA BLS173 SV |
| 1 x | Futaba BLS255/272/471SV - Gear Set |
| 1 x | Futaba 3010 - Gear Set |
| 1 x | Servo FUTABA S 3071 HV S-Bus |
| 1 x | Servo FUTABA SBL 471 SV |
| 1 x | Silicone black 6,0 qmm wire (25 m) |
| 1 x | Servo FUTABA BLS 272SV |
| 1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
| 1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
| 1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell |
| 1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
| 1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
| 1 x | Fiberglass heat shield Ø 6 mm 1000 mm |
| 1 x | 6 mm Quick clamp_S (10 pcs) |
| 1 x | Silicone red 4,0 qmm wire (25 m) |
| 1 x | Shaft sleeve LAMA |
| 1 x | WingFix ULTRA Black Edition |
| 1 x | Propeller balancer |
| 1 x | EDGE 540-A 105" (2660 mm) |
| 1 x | Rescue 1,8m2 / BackPack |
| 1 x | Para-RC "RC-Evo-Cross" Rescue |
| 1 x | Wing OXY 0,5 pulgadas2 |
| 1 x | Support conector MPX (6 pcs) |
| 1 x | A/C quality beech plywood 600x300x0.6 mm |
| 1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
| 1 x | SLICK 360-A 104" (2640 mm) |
| 1 x | SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm |
| 1 x | Ballast 700gr OPALE |
| 1 x | Para-RC Trike "RC-Bullix" |
| 1 x | Paramotor Kit Camo H1.5/ Ben Red |
| 1 x | Paramotor BackPack XXS (without accessories) |
| 1 x | Para-RC Mix |
| 1 x | Opale Rucksack |
| 1 x | Paramotor BackPack XXS 2 |
| 1 x | Paramotor Trike XL |
| 1 x | Parachute PV6 for F3J |
| 1 x | Windsock Ozone L - 700 mm |
| 1 x | Soporte filtro FESTO (4 pcs) |
| 1 x | A/C quality beech plywood 1520x750x4.0 mm |
| 1 x | Support ECU Xicoy X-45 |
| 1 x | Support FUEL DOT V3 |
| 1 x | Birch plywood plate 600x300x2.5 mm |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | Y Cable |
| 1 x | A/C quality beech plywood 600x300x8.0 mm |
| 1 x | Lite Plywood panel 600x300x3.0 mm |
| 1 x | Balsa panel 8.0x100x1000 mm |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | Balsa panel 2.0x100x1000 mm |
| 1 x | DPSI Micro MPS |
| 1 x | DPSI RV Mini 5 (2008) |
| 1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 1 x | DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch |
| 1 x | Servo-V-Limiter 5.2V |
| 1 x | DPSI 2001 RV |
| 1 x | Pushrod greyline 4/3 with coupler M3 |
| 1 x | JIVE 80+LV Esc |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 1 x | Servo FUTABA HPS-A700 Digital S-Bus |
| 1 x | PSC 5 |
| 1 x | CC 02 |
| 1 x | Programador FUTABA USB CIU-3 |
| 1 x | Spinner NUT M6 |
| 1 x | PROFI TX fastening rings |
| 1 x | Motor PERMAX BL-O 3520-920 (Extra 330 SC) |
| 1 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
| 1 x | Aluminium wide washer M4 Blue (4 pcs) |
| 1 x | Silicone red 2,5 qmm wire ( 1 m) |
| 1 x | Cable Cargador FUTABA |
| 1 x | Receiver FUTABA R7108SB FASSTest/FASST |
| 1 x | Motor mount M |
| 1 x | Protective Cover for wires Ø 20 mm 1000 mm |
| 1 x | Silicone red 1,5 qmm wire ( 1 m) |
| 1 x | Gyro 3-Ejes REFLEX V2 FMS |
| 1 x | Silicone black 6,0 qmm wire ( 1 m) |
| 1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
| 1 x | Pick up DA50/100/150 |
| 1 x | Pushrod octagone 4/3 with coupler M3 |
| 1 x | Motor Mount for TITAN ZG45 and ZG62, length 54 mm |
| 1 x | Cylinder for ZG20 |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Miniature brass strap hinge, 1 m |
| 1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
| 1 x | Piston ring for ZG 20 and G240RC |
| 1 x | Electric spoiler 250 mm (2 pcs) |
 |
| 18,676.35EUR |
temporarily out of stock
under request
