| 1 x | Extractor piñones 2.3/3.2 mm |
| 1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 2 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 2 x | Long pinned hinge (12 uds) |
| 3 x | Flap hinge (6 pcs) |
| 2 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 2 x | Gates hinge black 30x16 mm (2 pcs) |
| 1 x | Indoor hinge with servo arm integraded |
| 1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
| 3 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 2 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 2 x | Gates hinge |
| 1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Flap hinge 33x9 mm (6 pcs) |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | Pin hinge 39x20 mm (10 uds) |
| 1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
| 1 x | Hovercraft sailcloth |
| 1 x | Glases Ace |
| 1 x | Towing hook <3m |
| 1 x | Horn 16,5x20 mm (2 pcs) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | Oracover Black 10 m |
| 1 x | Aero-Master (Aero-naut) |
| 1 x | 5 mm Prop Adapter M8 |
| 1 x | 3.2 mm Prop Adapter M6 |
| 1 x | Prop Shaft Adapter 4 mm/M8 "long" 35 mm |
| 1 x | SCHARNHORST Battleship 1:200 |
| 1 x | Seoul Power LED 3 watts PCB Sets: 1x white, 1x red, 1x green |
| 1 x | LED wire (green - 2pcs) |
| 1 x | LED blink wire flashing (white - 2pcs) |
| 1 x | LED wire (white - 2pcs) |
| 1 x | Combo lighting module with covering drop shape |
| 1 x | Extra hard 1500 ccm complete gasoline fuel tank |
| 1 x | Double side nipple |
| 1 x | Junta humo metalica G20 (DLE20/DLE20RA/DLE40) |
| 1 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 1 x | 460 mm EPP Floats |
| 2 x | Gates hinge aluminium (1 pcs) |
| 1 x | Miniature brass strap hinge, 1 m |
| 1 x | Gates hinge 30x16 mm (2 pcs) |
| 2 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
| 1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
| 1 x | Sprung retractable undercarriage (Alfa model) |
| 2 x | Aluminun wheel collar 4 mm Ø (4 uds) |
| 1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 1 x | Micro flex hinge (12 uds) |
| 1 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
| 1 x | Propeller diller for EME35 and DLE35 |
| 1 x | Steel brush wheel with 2.35mm |
| 1 x | EC-Cutter |
| 1 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
| 1 x | Fabric scissors curved Premium, 16 cm / 6" length |
| 1 x | Soldering tip for KAVAN soldering iron KAV66.8338 |
| 1 x | Pistola termica MH 550 micro |
| 1 x | silverlot 45% - 1,50x500 mm solder rods (2 pcs) |
| 1 x | Heat Seal Iron |
| 1 x | Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs) |
| 1 x | Modelling compound (Plastilin), sculptor's quality 1 Kg |
| 1 x | Propeller diller for DLE111 and DA85-150 |
| 1 x | 25 mm Sandpaper file |
| 1 x | Spare round blades, 28 mm, pack/ 2 pcs. |
| 1 x | Propeller diller for DA50, DLE55 red |
| 1 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
| 1 x | Glases Nimbus |
| 1 x | Glases Moritz |
| 1 x | Glases Nimbus "Black" |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | ABS "T" angle 6.0x6.0x1000 mm |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | Balsa panel 1.5x100x1000 mm |
| 3 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
| 1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 1 x | Fast'n EZ-CA-Hinge (12 uds) |
| 1 x | Tachometer HANGAR 9 digital |
| 1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
| 1 x | Small pinned hinge (12 uds) |
| 1 x | Long pinned hinge (6 uds) |
| 1 x | Mudguard for 140/165 mm wheels |
| 1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
| 1 x | Pin hinge 34x16 mm (10 uds) |
| 1 x | Round flex hinge (12 uds) |
| 1 x | Swashplate metal LAMA |
| 1 x | Wheel FEMA 82 mm / 5 mm |
| 1 x | DUBRO - 102MM / 4" DIA BIG WHEELS (400RV) - 2PCS |
| 1 x | Starter EM Gear Power 250 |
| 1 x | Compact on-board starting system (9525) |
| 1 x | Gasket electric Fuel Pump |
| 1 x | 1/4 x 1/8" VITON tube for gas, kerosene, smoke (30 cm) |
| 1 x | Compact on-board starting system (9715) |
| 1 x | 280 cc gasoline fuel tank complet |
| 1 x | Junta humo metalica G61 (DLE55RA/DLE61/DLE120) |
| 1 x | CAM-Carbon Light Prop 10x6" |
| 1 x | Brass wire 0.5 mm (25 m) |
| 1 x | Block 1Rolle 3x7x3 mm (5 pcs) |
| 1 x | CAM-Carbon Light Prop 12x5" (Prop left) |
| 1 x | CAM-Carbon Light Prop 10x5" (Prop left) |
| 1 x | CAM-Carbon Light Prop 11x6" |
| 1 x | BABY glider (Aero-naut) |
| 1 x | Support pump Xicoy X45 |
| 1 x | Soporte filtro FESTO (4 pcs) |
| 1 x | Aro pasacable Ø20 mm (4 pcs) |
| 1 x | 3,2 mm Prop Adapter M8 |
| 1 x | 3 mm Leader (L 100 mm) |
| 1 x | 290 mm M4/4 mm Prop shaft |
| 1 x | 11x7 tree blades propeller |
| 1 x | 25 mm fenders (10 pcs) |
| 1 x | 300x4 mm M4 shaft ship |
| 1 x | Cable pass Ms 9x5 mm (10 pcs) |
| 1 x | Cabestrante 13 x12 mm (5 pcs) |
| 1 x | Boat 82 mm |
| 1 x | CAM-Carbon Light Prop 10x7" |
| 1 x | CAM-Carbon Light Prop 11x5" (Prop left) |
| 1 x | Cabestrante plastico 5x6 mm (10 pcs) |
| 1 x | 5 mm Prop Adapter M6 |
| 1 x | Aqua RACE 70 (without motor) |
| 1 x | Brass wire 0.30 mm (25 m) |
| 1 x | BLOCK m.Ose Ms vern 12 |
| 1 x | CAM-Carbon Light Prop 11x5" (Prop right) |
| 1 x | CAM-Carbon Light Prop 10x5" (Prop right) |
| 1 x | Axial ball bearing Ø 5 mm |
| 1 x | Barandilla Ms 10x250 mm (2 pcs) |
| 1 x | Block 21x19 mm (5 pcs) |
| 1 x | Bocina 30 mm (1 pcs) |
| 1 x | CAM-Carbon Light Prop 10x5" (Prop left) |
| 1 x | Cadena 1.0mm x 1 m |
| 1 x | Boat 43 mm (5 pcs) |
| 1 x | Tapa estado carga XT-60 (6 pcs) |
| 1 x | Soporte grifo FESTO vertical (1 pcs) |
| 1 x | Support Pitot JETI |
| 1 x | Support pumb/filter Xicoy X45 |
| 1 x | Recessed MPX connector support (6 pcs) |
| 1 x | Support Filtro FESTO |
| 1 x | Propeller electric carbon 9.5x6 |
| 1 x | 8Wx2 Gears-Spotlight, UltraPower, 20mm White |
| 1 x | 16mm Gear-Spotlight, 4W |
| 1 x | 4Wx2 Power Navigation Light, 13mm, T-Fuse White |
| 1 x | Lense for Spotlights, 20mm |
| 1 x | Set luces Airliner 2.1m Wingspan Scale 1:14 Civil/Sport |
| 1 x | 12x6 tree blades propeller |
| 1 x | Propeller POWER-PROP 10x7 |
| 1 x | Propeller POWER-PROP 10x6 |
| 1 x | Propeller electric carbon 10x8 |
| 1 x | 6x4 tree blades propeller |
| 1 x | Propeller POWER-PROP 12x8 |
| 1 x | Propeller electric carbon 8.5x6 |
| 1 x | 16x10 tree blades propeller Master Airscrew |
| 1 x | Propeller electric carbon 10x7 |
| 1 x | Propeller electric carbon 6x5 |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | Goma arrancador Ø36 mm x 30 mm |
| 1 x | Propeller Pleg CAM Carbon 11x5 |
| 1 x | Propeller Pleg CAM Carbon 13x5 |
| 1 x | Propeller Pleg CAM Carbon 12x6.5 |
| 1 x | Propeller Pleg CAM Carbon 12x8 |
| 1 x | Propeller Pleg CAM Carbon 11x6 |
| 1 x | Propeller Pleg CAM Carbon 13x11 |
| 1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
| 1 x | Z Bender - S Type Tool |
| 1 x | Starter EM Gear Power 80 |
| 1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
| 1 x | Lightweight aircraft wheel, 55x18.5x3 |
| 1 x | Mini wheels (3 pcs) |
| 1 x | Single rim type C3 36/33,5/18,5 mm (pneumatics 55-70 mm) |
| 1 x | Compact Pitts Muffler OS MAX.35.40 FP |
| 1 x | Resistor 3W 5% OR82 |
| 1 x | Astra wing Joinner (Top Model) |
| 1 x | Avia spare fouselage CF reinforced (Top Model) |
| 1 x | Retract undercarriage for gliders up to 3,5 Kg |
| 1 x | Avia spare blue cockpit (Top Model) |
| 1 x | Albatros ,spare cockpit (Top Model) |
| 1 x | Spring clamp for tube Ø29 mm ext 1pc |
| 1 x | Challenger ARF (Top Model) |
| 1 x | Hexagonal ball head 2.0 x 50 mm |
| 1 x | Wheel collar 4 mm Ø (4 uds) |
| 1 x | Cut tube |
| 1 x | Wheel collar 2 mm Ø (4 uds) |
| 1 x | Digital weight, angle and balance meter BASIC |
| 1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
| 1 x | Fresa corte diamante Ø 2.35mm (lentil) |
| 1 x | Wheel collar 5 mm Ø (4 uds) |
| 1 x | Propeller Pleg CAM Carbon 10x4 |
| 1 x | Propeller Pleg CAM Carbon 12.5x7.5 |
| 1 x | Propeller Pleg CAM Carbon 16x10 |
| 1 x | Propeller Pleg CAM Carbon 14x9 |
| 1 x | Propeller Pleg CAM Carbon 12x11 |
| 1 x | Propeller Pleg CAM Carbon 13x8 |
| 1 x | Propeller Pleg CAM Carbon 12.5x9 |
| 1 x | Propeller Pleg CAM Carbon 12x5 |
| 1 x | Propeller Pleg CAM Carbon 11x10 |
| 1 x | Propeller Pleg CAM Carbon 11x4 |
| 1 x | Propeller Pleg CAM Carbon 14x10 |
| 1 x | Propeller Pleg CAM Carbon 10x7 |
| 1 x | Propeller Pleg CAM Carbon 10x12 |
| 1 x | Propeller Pleg CAM Carbon 12.5x6 |
| 1 x | Propeller Pleg CAM Carbon 16x13 |
| 1 x | Propeller Pleg CAM Carbon 10x8 |
| 1 x | Propeller Pleg CAM Carbon 11x7 |
| 1 x | Propeller Pleg CAM Carbon 10x5 |
| 1 x | Propeller Pleg CAM Carbon 14x7 |
| 1 x | Propeller Pleg CAM Carbon 15x13 |
| 1 x | Propeller Pleg CAM Carbon 14x12 |
| 1 x | Propeller Pleg CAM Carbon 11x8 |
| 1 x | Propeller Pleg CAM Carbon 14x6 |
| 1 x | Propeller Pleg CAM Carbon 15x10 |
| 1 x | Propeller Pleg CAM Carbon 13x6.5 |
| 1 x | Propeller Pleg CAM Carbon 14x8 |
| 1 x | Propeller Pleg CAM Carbon 10x7 Reverse Rotation |
| 1 x | Propeller Pleg CAM Carbon 15x8 |
| 1 x | Propeller Pleg CAM Carbon 10x6 |
| 1 x | Ball Link Plier |
| 1 x | Dust collector for mould cleaning |
| 1 x | Starter 12v (Max 90 and 15ccm) |
| 1 x | Z Bender - S Type Tool |
| 1 x | Starter 12v (Max 180 and 30ccm) |
| 1 x | Adapter SPEED 500/600 |
| 1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 1 x | Tail boom brace LOGO 480 |
| 1 x | Super Light Wheels(Sponge Tyre) Ø 60mm x 21mm (2pcs) axis Ø 4.0m |
| 1 x | Superlight deluxe wheel 75 mm (2 pcs) |
| 1 x | Superlight deluxe wheel 45 mm (2 pcs) |
 |
| 5,431.05EUR |
