| 1 x | Ring 320 mm length (5 pcs) |
| 1 x | SE Ring HACKER 300 mm (2 pcs) |
| 1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 2 x | 20x1000 mm Ring Strap Back To Back |
| 2 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
| 1 x | SE Ring 450 mm (2 pcs) |
| 1 x | SE Ring 250 mm (2 pcs) |
| 1 x | Tape GFK 38 mm |
| 2 x | SE Ring 400 mm (2 pcs) |
| 2 x | SE Ring 330 mm (4 pcs) |
| 2 x | Cinta Goldfix 1m |
| 2 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | SE Ring 350 mm (2 pcs) |
| 2 x | 20x200 mm battery rings |
| 1 x | Marker ties (20 pcs) |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | BALSA triangular 6x6x1000 mm |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 2 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 2 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
| 1 x | Liston HAYA 8 x 8 x 1000 mm |
| 1 x | Carbon roving DowAksa / 24k / 1600 tex |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | Optical RPM Sensor |
| 1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 2 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 1 x | Pine wood slat 10x10x1000 mm |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
| 2 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
| 1 x | Liston HAYA 3 x 10 x 1000 mm |
| 2 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | 500 ml sealer (DOPE) |
| 1 x | Silicone adhesive ELASTOSIL® E4, tube/ 90 ml |
| 2 x | Plasti Dip Liquid Tape 429 ml black |
| 2 x | Spray Graphit 33 |
| 1 x | Partall paste 650 g |
| 2 x | Spray adhesive AEROFIX 2 |
| 2 x | Nitroverdu 500 ml |
| 1 x | Spannlack 1000 ml |
| 1 x | Spray adhesive INFUTAC (Clear) 500 ml |
| 1 x | Universal Colour Paste white 50 g |
| 1 x | 1000 ml sealer (DOPE) |
| 1 x | Tape GFK 25 mm |
| 1 x | Spikes Band (5 m) |
| 1 x | SE Ring 360 mm (2 pcs) |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Tape GFK 50 mm |
| 1 x | |
| 1 x | GameCommander USB Universal |
| 1 x | Simulador RealFlight RF-9.5 S (sin emisora) |
| 1 x | RF9 Flight Simulator with Spektrum Controller |
| 1 x | Interface Realflight Simulator |
| 1 x | SIMtransmitter 6 Mode 2 |
| 1 x | Interface Jack Adapter IKARUS |
| 1 x | White smoke canister 100 g |
| 1 x | Propeller POWER-PROP 14x9 |
| 1 x | DPSI Ampere battery backer |
| 1 x | 100 mm rods + T patellas set for direction control |
| 1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
| 1 x | 28x5 mm wires output (2 pcs) |
| 1 x | ABS tube 16.0x14.0x1000 mm |
| 1 x | Straightened rod Ø 2.0 mm x 1000 mm |
| 1 x | SE Ring 300 mm (2 pcs) |
| 1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
| 1 x | Carbon Non-Woven, 240 g/m² 100 cm x 2m |
| 1 x | A/C quality beech plywood 600x300x0.6 mm |
| 1 x | Balsa panel 3.0x100x1000 mm |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
| 1 x | A/C quality beech plywood 1520x750x3.0 mm |
| 1 x | Fiberglass plate 350x150x4.0 mm |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav |
| 1 x | Glass fibre sleeve Ø 20 mm X 20m |
| 1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 10m |
| 1 x | Birch plywood plate 600x300x1.2 mm |
| 1 x | Glass fabric 163 g/m² 130cmx5m (Interglas 92105, aero, finish |
| 1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m |
| 1 x | Balsa panel 5.0x100x1000 mm |
| 1 x | Styrene plate 320x120x0.5 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
| 1 x | Peel ply 64 g/m² (plain weave) 150 cm x 20m |
| 2 x | BALSA triangular 10x10x1000 mm |
| 1 x | Peel ply 64 g/m² (plain weave) 150 cm x 10m |
| 1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
| 2 x | Painting GHT Lexan Black 150 ml |
| 1 x | Motor OS 3820-1200 electric |
| 1 x | Plasti Dip Liquid Tape 429 ml black |
| 1 x | Plasti Dip Liquid Tape 429 ml orange |
| 1 x | |
| 1 x | Solvent Plasti Dip 1000 ml |
| 1 x | Paint gun for sprays |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | Servo holder for retract |
| 1 x | Blue aluminium servo arm V3-Hitec 1,0inch M3 |
| 1 x | Servo KST A08H V6.0 3,2Kg HV |
| 1 x | Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor |
| 1 x | Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm |
| 1 x | Servo KST X10 V2.0 ala 10mm 28g 10.8Kg |
| 1 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
| 1 x | Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13 |
| 1 x | Servo TT ACE SHV 1504 MG |
| 1 x | Servo KST X08H V5.0 HV DIGITAL Wing servo 8mm |
| 1 x | Servo BLS-M55B 61.2kg |
| 1 x | Servo BMS-4112 |
| 1 x | Servo KST X08 Plus 9g HV servo |
| 1 x | Servo SAVOX SV-1254 MG HiVolt Low Profile |
| 1 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
| 1 x | aluminium servo arm V1-JR 1,0 inch M2 |
| 1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
| 1 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
| 1 x | Z-shaped servo mount |
| 1 x | Servo KST X06H - 1.8Kg.cm 7mm 6g |
| 1 x | Blue aluminium servo arm V3-Hitec 1,5inch M3 |
| 1 x | Servo KST X10-710 V8.0 7.5Kg HV |
| 1 x | Servo arm with 6 mm hole to FEMA 9800A |
| 1 x | Vacuum bag, 1200 mm x 50 m |
| 1 x | Servo KST BLS915 HV V8.0 25Kg 20mm 78g |
| 1 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
| 1 x | L-shaped servo mount |
| 1 x | Blue aluminium servo arm V2-Hitec 1,5 inch M3 |
| 1 x | Gold aluminium servo arm V2-JR 1,0" inch M3 |
| 1 x | Super Light Wheels(Sponge Tyre) Ø 60mm x 21mm (2pcs) axis Ø 4.0m |
| 1 x | DUBRO - 102MM / 4" DIA BIG WHEELS (400RV) - 2PCS |
| 1 x | Fishing boat Jule Fischkutter |
| 1 x | DIVA cabin cruiser |
| 1 x | 127x43 Ø6.0 mm aluminium core wheel |
| 1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
| 1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
| 1 x | M2,5 5Diam black ball link V2 (2 pcs) |
| 1 x | Motor A2212/13T |
| 1 x | Aluminium M2x12 mm screw (4 pcs) |
| 1 x | Size "M" motor holder for class 400 |
| 1 x | A60 Motor Mount Alu complete set |
| 1 x | Central support Speed 280 |
| 1 x | Bearings for motor HACKER C50 |
| 1 x | DUBRO - CUB WHEELS (1/3 SCALE) (558TLC) - 2PCS |
| 1 x | Foam wheel Ø 351 mm (2 pcs) |
| 1 x | Wheel 18 mm |
| 1 x | 102x26 Ø6.0 mm aluminium core wheel |
| 1 x | Super Light Wheels(Sponge Tyre) Ø 50mm x 19mm (2pcs) axis Ø 3.5m |
| 1 x | Wheel 22 mm |
 |
| 7,156.82EUR |
