3 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
3 x | Marker ties (20 pcs) |
2 x | Spikes Band (5 m) |
3 x | Ferrita con funda |
4 x | Buy Perforated film 100 cm / 50 m |
3 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
5 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | 38x4,5 mm wires output (2 pcs) |
3 x | ARAMID honeycomb 1300x2600x2 mm |
4 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
2 x | ABS 500 x 400 x 1,5 mm (white) |
3 x | ABS 500 x 400 x 2,0 mm (white) |
4 x | SE Ring 400 mm (2 pcs) |
5 x | SE Ring 350 mm (2 pcs) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
2 x | SE Ring 330 mm (4 pcs) |
2 x | Tape GFK 50 mm |
2 x | SE Ring 300 mm (2 pcs) |
3 x | 20x1000 mm Ring Strap Back To Back |
3 x | 20x200 mm battery rings |
5 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
3 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
5 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
7 x | Aluminum Bayonet / strongal D25 mm / 1 m |
5 x | SE Ring 450 mm (2 pcs) |
3 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
3 x | SE Ring 250 mm (2 pcs) |
2 x | SE Ring HACKER 300 mm (2 pcs) |
7 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
5 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
3 x | Cinta Goldfix 1m |
4 x | Tape GFK 38 mm |
6 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
2 x | SE Ring 200 mm (2 pcs) |
5 x | Ring 320 mm length (5 pcs) |
6 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
3 x | Ventus 1:4 set of instruments |
5 x | Tape GFK 25 mm |
5 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
2 x | 1,2x1000 mm 2:1 black termoretract tube |
1 x | 102x26 Ø6.0 mm aluminium core wheel |
2 x | NIKE-2 EVO ARF |
1 x | Fox MDM 1 4000 mm Std. |
2 x | Albatros ,spare fuselage (Top Model) |
2 x | A/C quality beech plywood 498x247x2.0 mm |
1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
4 x | Parachute PV6 for F3J |
1 x | A30-M/L/XL Backmountset complete |
1 x | Axle for motor A30-XL V2 |
1 x | Jeti Box mini |
1 x | Ion Pro, Wing joiner (JP Model) |
1 x | Fascination 3600 mm, Spare Elevator (Top Model) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
2 x | Fox MDM 1 4000 mm DeLuxe,cabina |
1 x | 1/6 Pilot "Cindy" |
1 x | Ferrita 17x10x6.5 mm |
2 x | Aero-Master (Aero-naut) |
1 x | Threaded coupler M3 (10 uds) |
1 x | 100x50 mm SLH KOVO wheel |
1 x | Buy Perforated film 100 cm / 10 m |
1 x | White smoke canister 140 g |
1 x | A50 Backmountset complete |
2 x | Beech dowels 3.0 x 1000 mm |
1 x | A60-6XS V4 28-Pole |
4 x | Set cintas unión paracaídas 145 cm |
2 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
2 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | A50 Backmountset complete |
2 x | Avia spare fouselage CF reinforced (Top Model) |
2 x | Ventus 2cx 4.5 m de Luxe |
1 x | 1/6 Pilot "Buddy" |
2 x | AX-60 starters (5 pcs) |
1 x | Threaded coupler M2 (10 uds) |
1 x | SATORI 2 PRO V C64 F5J |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 10 m |
4 x | Angled clevis with threaded rod M3 |
2 x | Esc MasterBasic 70SB |
1 x | ASW 20 5000 mm with winglets (Airwold) |
1 x | DUPLEX 2.4EX RC Switch |
1 x | 3,2x1000 mm 2:1 red termoretract tube |
1 x | AX-60 starters (5 pcs) |
1 x | Challenger ARF (Top Model) |
2 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
3 x | 12,7x1000 mm 2:1 green termoretract tube |
1 x | Swift 5050 mm (Airwold) |
2 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
2 x | Avia (Top Model) |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | 115x29 mm (4.50") Type jets aluminium core wheel |
1 x | Vest clothes Hispano Aviación |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
2 x | Painting GHT Lexan Black 150 ml |
2 x | Ventus 2cx 4.5 m Sapare Fuselaje |
3 x | Beech dowels 4.0 x 1000 mm |
1 x | ASW 15 5000 mm (Airwold) |
1 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
1 x | Kwik link AL M4 con Clip (2 pcs) |
2 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | A40 Backmountset complete |
1 x | 5 LiPo XH>EH adapter |
1 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
2 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
3 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Fournier RF-4D |
1 x | Ion Pro, Canopy (JP Model) |
2 x | 2 mm female connector (2 pcs) with safety connector |
2 x | Carbon fiber rod 14 mmx1000 mm |
1 x | 170x54 mm SLH KOVO wheel with bearing and metal hub |
5 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
2 x | Squared carbon wing joinner 5x5x220 mm |
1 x | PCARD Wireless System |
1 x | 120x60 mm C SLH KOVO wheel |
1 x | Paramotor Trike XL |
2 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Spannlack 1000 ml |
3 x | Gracia (Top Model) |
2 x | 2,4x1000 mm 2:1 green termoretract tube |
2 x | Spray EC Red 400ml |
1 x | Rescue 1,8m2 / BackPack |
1 x | 18m Fitting barb |
1 x | 3l Smoke oil |
3 x | Z type of cable coupler Ø 1.8 (2 uds) |
2 x | 1/12 Pilot "Fighter" |
1 x | Ventus 2cx 4.5 m |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Partall paste 650 g |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
2 x | ProgBOX MASTER Hacker |
1 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | Green smoke canister 65 g |
2 x | Silent-blocks DLE 170M |
1 x | |
1 x | Initior Transmitter FTX2 Wireless |
1 x | Axle for motor A20-S (3 uds) |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Smoke set "S" |
2 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Aero-Master Wings (Aero-naut) |
1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
2 x | BALSA trip 5.0x5.0x1000 mm |
3 x | Hacker X-Pro USB interface V2 |
1 x | LUNAK 4,00 m |
2 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | "S" set for boats |
2 x | Fascination 3600 mm, Spare Wings (Top Model) |
3 x | Kontronik ProgUnit |
1 x | Mixers smoke bombs AX-60 (5 pcs) |
2 x | Astra (Top Model) |
1 x | Smoke set "Glider" |
1 x | EASYGLIDER 4 RR |
1 x | 127x43 Ø6.0 mm aluminium core wheel |
1 x | Esc MasterBasic 90 Opto |
1 x | Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models) |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
2 x | Carbon fiber rod 3.0 mm x 1000 mm |
4 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
2 x | Q-12 X-light 2000 mm Electric |
1 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | ASK 21 6.8m |
1 x | Navaho new design (Top Model) |
1 x | Esc MasterSPIN 100 Pro |
1 x | 120x60 mm SLH KOVO wheel |
1 x | 1/12 Pilot "Langley" |
2 x | Smoke set "M" |
1 x | 2,0x50 mm allen screwdriver |
2 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | GRAFAS MAXI ARF |
1 x | Aluminium Hub for folding Props 37 mm M8 Shaft 5 mm |
5 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | Red smoke canister 65 g |
2 x | Wing OXY 5,0 m2 |
1 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
1 x | Conector FUTABA Servo male BLUE silicon (10 pcs) |
2 x | Paint gun for sprays |
2 x | Sparkplug 1/4-32 EVO 10GX |
1 x | Threaded coupler M2,5 (10 pcs) |
1 x | Connector CAN 15 |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | A50 Backmountset complete V3/V4 |
1 x | Conector JR Servo female (10 pcs) |
1 x | Connectors banna oro 3,5 mm (M/F) |
2 x | ABS tube 8.0x6.0x1000 mm |
1 x | Sparkplug NGK CM6 |
1 x | wire tensioner (red) |
3 x | Cap Hispano Aviación |
1 x | Aluminium Hub "Z" for folding Props 38 mm M8 Shaft 8 mm |
1 x | Red silicone 1,0 qmm wire (50 m) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
3 x | "Taxi Tank" Fuel Tank |
1 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
3 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | PVC termo-retract battery 95 mm blue transparent (1 m) |
1 x | Extinguisher CO2 - 2 Kg |
1 x | Servo DITEX TD2612S |
2 x | ABS tube 8.0x7.0x1000 mm |
1 x | HERON RR |
1 x | XT-60 connector (female) |
1 x | DUPLEX 2.4 EX MBar |
3 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | Servo FUTABA S 3071 HV S-Bus |
1 x | Sparkplug ROSSI R8 |
1 x | Porta Kwik link M4 4 mm (2 pcs) |
1 x | Prelude ARF 2500 mm, spare wing (TopModel) |
1 x | Ka 8 B (Top Model) |
2 x | Spark motor OS nº 8 |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
2 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Turnbuckle M1,6x20/30 (2pcs) |
1 x | Servo FUTABA SBL 471 SV |
2 x | TopFuel LiPo 20C-ECO-X 4600mAh 5S Competition F3A 2017 |
2 x | 1,6x1000 mm 2:1 black termoretract tube |
1 x | 1/6 Pilot "Garry" |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | TopFuel LiPo RX 25C-ECO-X 800mAh 2S |
2 x | DUPLEX MUI 30 Sensor |
1 x | Stainless steel 4 m Pull-Pull complet set (max 20 kg) |
1 x | Silicone black 4,0 qmm wire ( 1 m) |
2 x | Nitroverdu 500 ml |
3 x | Trike XL motor set (motor+esc+prop) |
1 x | Plasti Dip Liquid Tape 429 ml orange |
3 x | Windsock Ozone L -1200 mm |
1 x | Towing hook |
2 x | Green smoke canister 100 g |
2 x | Connectors banna gold 5,5 mm (M/F) |
1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
3 x | BALSA triangular 10x10x1000 mm |
1 x | Small kwik link (10 pcs) |
1 x | 3,2 mm Prop Adapter M8 |
1 x | Pulley brass 5/1,5 (2 pcs) |
1 x | 20 g tin paste |
1 x | ABS 500 x 400 x 0,5 mm (white) |
2 x | Threaded coupler M2 (10 pcs) |
1 x | Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs) |
1 x | |
1 x | Futaba 25 mm servo arm with ball link |
3 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | White smoke canister 65 g |
1 x | Ventral support for AX-18/AX-60 |
2 x | Balsa panel 4.0x100x1000 mm |
2 x | Telemetry interface ALTIS to Futaba |
1 x | MYSTIQUE 2.9 m ARF |
1 x | Sparkplug DLE CM6 |
1 x | Futaba BLS152 - Upper Case |
1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | FESTO connector M7 Quick 4mm 90º |
1 x | 28 mm turnbuckle |
1 x | Flip ARF (Top Model) |
1 x | 89x25 mm (3.50") Type jets aluminium core wheel |
3 x | Servo FUTABA S 3072 HV S-Bus |
1 x | XT-30 connector (pair) |
1 x | DUPLEX 2,4EX Stick with Potentiometer for Transmitter DC/DS |
1 x | Pine wood slat 2.0x2.0x1000 mm |
6 x | Altimeter Altis NAO |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
4 x | GPS Altis |
2 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Balsa panel 1.0x100x1000 mm |
2 x | OBECHI sheet 2.0x3.0x1000 mm |
2 x | Device Terminal |
1 x | Servo holder for retract |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Pine wood slat 1.5x3.0x1000 mm |
2 x | L-shaped servo mount |
1 x | Balsa panel 10x100x1000 mm |
2 x | BALSA trip 2.0x2.0x1000 mm |
4 x | Balsa panel 3.0x100x1000 mm |
1 x | Keypad ALTIS V4 |
4 x | Telemetry interface ALTIS 20 cm |
2 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Telemetry interface ALTIS 12 cm |
2 x | Balsa panel 6.0x100x1000 mm |
2 x | Mahogany wood slat 3.0x3.0x1000 mm |
2 x | Balsa panel 2.0x100x1000 mm |
2 x | Birch plywood plate 600x300x4.0 mm |
1 x | Z-shaped servo mount |
2 x | Balsa panel 1.5x100x1000 mm |
2 x | Pine wood slat 10x10x1000 mm |
1 x | Balsa panel 2.5x100x1000 mm |
2 x | A/C quality beech plywood 498x247x1.2 mm |
2 x | External LED's (2 pcs) |
1 x | RX Battery Eneloop 6,0 V JR 2500 mAh |
1 x | Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | Servo Digital HITEC HS-5065 MG |
1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
2 x | Fuel Fittings-Blue |
4 x | Shirt Hispano Aviación |
1 x | Futaba BLS255/272/471SV - Gear Set |
2 x | Birch plywood plate 600x300x3.0 mm |
2 x | Spray Graphit 33 |
2 x | BALSA triangular 15x15x1000 mm |
1 x | XH female balance (3S) connector (2 pcs) |
2 x | 3.2 mm Prop Adapter M8 |
1 x | Wing OXY 0,5 pulgadas2 |
1 x | 76x24 mm (3.0") Type jets aluminium core wheel |
3 x | Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm |
1 x | Conector BEC female (10 pcs) |
2 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
3 x | Servo arm with 6 mm hole to FEMA 9800A |
3 x | Altimeter Altis V4 |
2 x | Telemetry interface ALTIS 6 cm |
2 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
2 x | Futaba S3010 Servo - Standard BB 0.16s/6.5kg |
1 x | 4 LiPo XH>EH adapter |
2 x | 1,2x1000 mm 2:1 red termoretract tube |
1 x | Para-RC Trike "RC-Bullix" |
1 x | Yellow smoke canister 65 g |
1 x | Hitec 52 mm servo arm |
2 x | Carbon fiber flat 1000x6.0x0.8 mm |
2 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Battery RX JETI LiIon RB 5200 7.2v |
1 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 2 cell |
1 x | PVC transparent battery termo-retract 85 mm (1 m) |
1 x | T-Hose connector 3-3-3 mm |
2 x | LS-8 GFK 6m Glider |
1 x | Connectors banna oro 4 mm (M/F) |
2 x | Fox 4000 mm with flaps (Airwold) |
2 x | 4" - 102 x 45 mm Ø5 mm aluminium core wheel |
1 x | PVC transparent battery termo-retract 51 mm (1 m) |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | SHK 4000 mm Scale 1:4.25, V-Tails |
2 x | Silicone black 1,0 qmm wire (100 m) |
2 x | FESTO connector M7 barb fitting 6mm |
2 x | 2 mm Prop Adapter M6 |
2 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
2 x | 33,0 mm propeller (rigth propeller) |
2 x | TopFuel LiPo 25C-ECO-X 1300mAh 2S |
1 x | DUPLEX MUI 50 Sensor |
1 x | Bearings for motors hacker A50 |
3 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
3 x | 1000 cc gasoline fuel tank complet |
1 x | XENON RC (Aero-naut) |
1 x | A60 Motor Mount Alu complete set |
2 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
2 x | TP/TopFuel - XH 2/3S Adapter |
1 x | SWEET Electro ARF "CFR fuselage " (Top Model) |
1 x | Suction funnel for carburetor 90D-L (red) |
1 x | Motor A2212/13T |
1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
1 x | Me-163 |
1 x | Z type of cable coupler Ø 2 (2 uds) |
1 x | 36 mm white plastic spinner for fixed propeller |
2 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
2 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | Support 45% Hopper JetsMunt |
2 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | A/C quality beech plywood 600x300x1.5 mm |
2 x | 1,6x1000 mm 2:1 red termoretract tube |
1 x | Porta Kwik link M4 3 mm (2 pcs) |
1 x | Fascination 3600 mm (Top Model) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo |
1 x | 5 mm Prop Adapter M8 |
1 x | 3,2 mm Prop Adapter M5 |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | |
1 x | Remote electric ignition system |
1 x | Battery RX JETI LiIon RB 6200 7.2v |
1 x | Extension Arm for Carburetor (red) |
2 x | Sanyo RX Battery Eneloop 6,0 V Futaba |
1 x | Servo HITEC HS-635HB Carbonite |
1 x | PVC yellow battery termo-retract 69 mm (10 m) |
1 x | DUPLEX R12 EPC receiver 2,4GHz |
1 x | Servo HITEC D950 TW |
1 x | Yellow smoke canister 100 g |
1 x | Servo FUTABA S 9670 SV |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | 1/12 Pilot "Cougar" |
1 x | PropCover 16-20" (1 pcs) |
1 x | PowerBox Competition |
1 x | BIG MOSNTER |
1 x | Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi |
2 x | Red smoke canister 100 g |
1 x | Copier 2x20 cm pcs |
1 x | PowerBox Spare part magnetic sensor |
1 x | Servo lock HS-80/81/82/85 (2 pcs) |
1 x | Blue smoke canister 140 g |
1 x | Carbon plate 350x150x3.0 mm |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
4 x | Tube Pitot to PIXHAWK |
2 x | DUPLEX 2.4EX Expander E4 |
1 x | Pegasus 2050 mm F4J (Top Model) |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
2 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
4 x | Buy Perforated film 100 cm / 20 m |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | 3.2 mm Prop Adapter M6 |
1 x | switch 1-Spring-UP 3-position DC Tx DUPLEX 2,4EX |
1 x | 550 cc gasoline fuel tank complet |
1 x | Futaba 30 mm servo arm with M3 ball link |
1 x | Red 4 mm connector holder |
1 x | Small adjustable aluminium control horn with bearing 2,8x15 |
2 x | 12.7 mm 2:1 black termoretract tube |
2 x | Conector FUTABA Servo female (10 pcs) |
1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
1 x | Extension for LC-Display 50cm |
1 x | 30 cm BEC cable (male) |
2 x | DA 85 / DA 100 / DA 100 L carburetor |
1 x | 4,8x1000 mm 2:1 red termoretract tube |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
2 x | Softshell Hispano Aviación |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
1 x | Transparent spiral protective cover for wires Ø 0,5/50 mm - 25 m |
1 x | 31,0 mm propeller (rigth propeller) |
2 x | 1000 ml sealer (DOPE) |
2 x | DUPLEX R18 EX 2,4GHz + Rsat2 |
1 x | ABS tube 5.0x4.0x1000 mm |
1 x | DLE 111 pipe plug |
1 x | Lite Plywood panel 600x300x3.0 mm |
1 x | DUPLEX 2.4EX MU 3 Sensor |
2 x | DC Small for MultiLog & UltraLight |
1 x | USB Mini Camera endoscope |
1 x | Tornillo cabeza boton M4x12 mm (5 pcs) |
2 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
2 x | DUPLEX 2.4EX MT 300 EX |
2 x | Fiberglass plate 620x540x0,3 mm |
2 x | Windsock Ozone L - 700 mm |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
3 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Short adjustable control horn 3x24 |
1 x | Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T, |
1 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
2 x | EME 55 cc carburetor WALBRO |
1 x | Crystal Universal RX 35.020 Ch 62 |
2 x | Bag connector 2 mm |
1 x | Turnbuckle M2,5x27/43 (2pcs) |
1 x | XH male balance (3S) connector (2 pcs) |
2 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | OLED-Display for PowerBox Mercury SRS |
2 x | Aluminium Hub for folding Props 43 mm M8 Shaft 5 mm |
1 x | switch long 3-position DS Tx DUPLEX 2,4EX |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
1 x | Crystal Universal RX 35.030 Ch 63 |
1 x | Propeller MEJZLIK 20x13 Electric light (41 g) |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
2 x | Hardener Aero EPH 161 (250 g) |
1 x | THERMIK XXXL 4,9m CFK Electric |
3 x | Propeller MEJZLIK 20x10 Electric light (36 g) |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Servo HITEC HS-5475 HB Digi |
3 x | Carbon fiber rod 5.0 mmx1000 mm |
2 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
3 x | PropCover 16-20" (2 pcs) |
1 x | Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l) |
2 x | Teflon rollers 40 mm x 15 mm Diam. |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Parachute P4 |
1 x | Concave-Convex sandpaper file 13 mm |
1 x | 500 ccm gasoline fuel tank |
1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | Cable adapter iCharger |
3 x | Connectors banna oro 2 mm (M/F) |
1 x | FESTO connector M7 barb fitting XL Tygon |
1 x | Batetia LiFe 3200 mAh 6.6v MPX PowerBox |
1 x | Esc MasterSPIN 16 Pro |
2 x | CA Glue fast 20g |
1 x | 73x24 mm hard foam KOVO wheel (2 pcs) |
1 x | SIG Coverall 1.2x4.5 m |
1 x | ESC YGE 120 LVK |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
1 x | Sanyo Eneloop AA 1,2 V 2400 mAh battery |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
2 x | Cyanocrylate MD GA460 odourless 20g |
1 x | Welder 100W/200V |
2 x | Y-Hose connector 4-4-4mm |
4 x | RX Battery Eneloop 4,8 V JR 2500 mAh |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
1 x | Suction funnel for carburetor WALBRO 20-80cc (blue) |
1 x | Propeller MEJLIK 18x8 CFK |
1 x | PPM to Jack link - Tx Red (stereo) DC/DS Tx DUPLEX 2,4EX |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 20 m |
1 x | Parachute expulsion foam |
1 x | Module 2.4GHz T-FHHS "F" Series |
1 x | Receiver DUPLEX R4H EX 2.4 GHz |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Sanyo RX Battery Eneloop 6,0 V JR |
1 x | Receiver DUPLEX R3L EX 2.4 GHz |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
1 x | Motor Typhoon 2W-20 |
1 x | XH female balance (2S) connector (2 pcs) |
1 x | Cable coupler M2x66 (2 uds) |
1 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) |
1 x | TopFuel LiPo 20C-ECO-X 5000mAh 6S |
1 x | Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm |
2 x | DYMOND VTX UBS Programming adapter |
1 x | Small aluminium horn blue (2pcs) |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | LiPo Storage Box Type "P" |
2 x | PIX Hawk with accesories |
1 x | Jeti Advance Pro Program Card |
2 x | White Fold Prop Spinner 38 mm / 5 mm shaft / 8 mm propellers |
1 x | Reed valve for DA 50-R |
2 x | SAITO FG-36 carburetor |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Spinner Alumin. fixed propeller 45 mm / 6,0 mm |
1 x | 37 mm PVC transparent battery termo-retract (1 m) |
2 x | Suction funnel for carburetor 90D-M (red) |
1 x | TopFuel LiPo 25C-ECO-X 350mAh 2S |
1 x | MPX-Dean "T" Adapter |
2 x | Silicone black 4,0 qmm wire (25 m) |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Servo-V-Limiter 5.2V |
1 x | PHASOR RACE 2035/4100 1D |
1 x | DUPLEX 2,4EX Stick with 3-Position Switch for Transmitter DC/DS |
1 x | PowerBox Cockpit SRS (incl. SensorSwitch) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Small aluminium horn gold (2pcs) |
2 x | resin-hardener package L-385 with hardener H-385 (3.5 Kg) |
1 x | Fascination 3600 mm ARC |
1 x | PowerBox Champion SRS |
2 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Blue aluminium double servo arm HITEC 40 mm M3 F3A |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Servo HITEC HS-55 |
1 x | Servo HITEC HS-65 HB |
2 x | ABS tube 9.0x7.0x1000 mm |
1 x | Jeti Spin 200 OPTO |
1 x | Dean "T" - Futaba Adapter |
1 x | Connectors MPX female |
1 x | 2,3 mm Prop Adapter M6 |
1 x | Transmitter JETI Duplex DS-24 EX Carbon Line Dark RED Multimode |
1 x | Male Prolonger TP 4/5S |
1 x | Connectors DEANS 4 pins (1 pair) |
3 x | ABS tube 2.0x1.0x1000 mm |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | Canopy Sweet / Siesta |
1 x | 3 mm Leader (L 100 mm) |
1 x | TopFuel LiPo 25C-ECO-X 1800mAh 3S |
1 x | 90x45 mm hard foam KOVO wheel |
1 x | PPM Encoder Module |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Spinner INOVA 63 mm White |
1 x | PVC termo-retract battery 45 mm transparent orange (1 m) |
1 x | Horizontal servo holder |
1 x | 101x28 mm (4.0") Type jets aluminium core wheel |
1 x | 3,2 mm Prop Adapter M6 |
1 x | "S" set for planes |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
1 x | 22x10 prop Super Silence |
2 x | PowerBox MagSensor red connector |
4 x | Cable coupler M2,5 (2 pcs) |
1 x | White smoke bombs AX-9 (10 pcs) |
1 x | Peel ply 95 g/m² (plain weave) 100 mm x 100 m |
2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | Spark motor OS Type F |
1 x | Tyres 70 mm Xclaibur (2 pcs) |
1 x | QUANTUM II 55 Brushless Motor |
1 x | Servo inverter |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | PROFI Box JETI |
1 x | Fiberglass plate 350x150x3.0 mm |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Sanyo RX Battery Eneloop 6,0 V JR |
1 x | Allen wheel collar M3x3 |
1 x | Battery FUTABA Li-Fe 2100 mAh 6.6v 4PLS/4PX/8J/10J/14SG/18SZ |
1 x | MT 125 temperature sensor |
1 x | Albatros ,spare cockpit (Top Model) |
1 x | Conector JR/Uni Servo female BLUE silicon (10 pcs) |
2 x | Jeti Advance Plus Program Card |
1 x | 5 mm Prop Adapter M8 |
4 x | Universal Colour Paste white 50 g |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
1 x | FESTO connector M5 Quick 6 mm |
1 x | Pulley brass 4/1,5 (2 pcs) |
2 x | 2,3 mm Prop Adapter M6 |
1 x | Gas, Smoke Fluid or Kerosene Refueling Dry-Break Ports w/Return |
2 x | Servo DITEX EL0510M |
1 x | 45x19 mm hard foam KOVO wheel (2 pcs) |
1 x | 20x10 BIELA propeller (4-blades) Corsair Scale |
1 x | Miss Wind 50E White landing gear(SebART) |
1 x | Prop Shaft Adapter 8 mm/M12 "long" |
1 x | SCHARNHORST Battleship 1:200 |
1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
1 x | JSM XCALIBUR ful Trike |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | VITAPROP CARBON FOLDING PROP 15x9.5" |
1 x | 29x23D BIELA propeller |
1 x | Spinner Alumin. fixed propeller 45 mm / 3,2 mm |
2 x | Sanyo TX Battery Eneloop 9,6 V Hitec |
1 x | Futaba SBS-02A Air Pressure Telemetry Sensor (FASSTest/T-FHSS) |
2 x | DUPLEX 2.4EX Satellite receiver Rsat 2 |
1 x | Spinner INO 51 mm Chrome (Imitacion metal) |
1 x | Yellow smoke canister 140 g |
2 x | VPP system propeller for AXI VPP motors (spare) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm) |
1 x | 280 cc gasoline fuel tank complet |
1 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | CESSNA 50E White/Blue |
1 x | Turbo Prop KS |
2 x | Teflon rollers 80 mm x 15 mm Diam. |
2 x | Aero-Master Cabine (Aero-naut) |
2 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
2 x | 500 ml sealer (DOPE) |
1 x | DPSI Micro - RCS |
1 x | Bidule 111 3000 mm Canopy |
3 x | Para-RC Mix |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | FANTEX 4xx turbina |
1 x | Conector Servo female 4 pines |
1 x | Sensor DUPLEX 2.4EX MUI 200 MULi 6S for measuring voltage on LiX |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 4 cell |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
1 x | 5 mm Prop Adapter M8 |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
2 x | Blue aluminium servo arm V2-Hitec 1,0 inch M3 |
1 x | PBY 6/6A Catalina, Observer´s dome (L + R) |
1 x | BULLIT Wing 840 mm |
1 x | BlueCom™ Adapter (Android / WP) |
1 x | Wots Wot Foam-E ARTF (Ripmax) |
2 x | Neck strap JETI DS |
1 x | Adapter 4,0 mm M6 |
1 x | Propeller CFK 14x10 |
2 x | Para-RC "RC-Evo-Cross" Rescue |
1 x | FUTABA F14 + R168DF + Servo S148 |
1 x | Spray adhesive INFUTAC (Clear) 500 ml |
1 x | Poerfly |
1 x | Peel ply 100 g/m² (plain weave) 50 cm x 2m |
1 x | DUPLEX 2.4EX MUI 150 Sensor |
1 x | Aero-Master Fuselage (Aero-naut) |
1 x | EDGE 540S 50E blue/red (SebArt) |
2 x | Solvent Plasti Dip 1000 ml |
1 x | Transmitter Stick Ends JETI DS-16/14 |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | resin-hardener L-385 H-385 (1250 g) |
1 x | Bidule 55 2460 mm Cabina |
1 x | Buy Perforated film 145 cm / 50 m |
1 x | JETImodel SINGLE BEC |
1 x | 60 mm long Prop hub for ZG45SL, ZG62/S/SL and ZG80B |
1 x | 2 piece mounting frame Battery 3200 / 4000 |
1 x | XCALIBUR Fuel Tank with built in UAT |
1 x | Gold aluminium double servo arm V3-JR 3.5 inch M3 |
1 x | SERVO S9177SV HV S-Bus2 Programable |
1 x | Propeller CFK 14x8 Slim |
1 x | TUNED PIPE for motors up to 40-60 & 70-85 cc |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
2 x | Paramotor BackPack XXS 2 |
1 x | switch 1-Spring-DOWN 3-position DC Tx DUPLEX 2,4EX |
1 x | EXTREME FLIGHT EXTRA 300-48" (1.22 m) ARF Blue (EXTREME FLIGHT) |
1 x | 5 mm Prop Adapter M6 |
1 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
1 x | Towing hook |
1 x | Propeller CFK 11x8 |
1 x | Glider STROLCH |
1 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | Propeller MEJZLIK 9,5x3 SF Carbon Indoor |
1 x | Nose Cone Xcalibur Sport |
1 x | Xplorer2 anemometro |
1 x | 250 mm / 16 mm Airbrakes |
1 x | 26x18 BIELA propeller |
1 x | Thixotropic agent tin/ 15 g (approx. 350ml) |
1 x | XCALIBUR Sport Scheme |
1 x | Styrene plate 320x120x0.5 mm |
1 x | Carburetorgasket DA-85, DA-100, DA-100L and DA-120 |
1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | DUPLEX R6G indoor receiver 2,4GHz |
1 x | 2,5x60 mm allen screwdriver |
1 x | Battery LiPo GENS 5300 mAh 2S 7.4V 30C (Gens Ace) |
1 x | Transmitter JETI Duplex DS-12 EX Multimod BLUE |
1 x | Sensor telemetry FUTABA SBS-01C |
1 x | Screw M2.5x10 (10 pcs) |
1 x | Quadcopter Q50 Kit Carbon Fiber |
1 x | HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program |
1 x | FOXY G2 C3530-700 |
1 x | Smoke Dot (Red) |
1 x | Rudder 2_Tray 3.5~4 inch |
2 x | A/C quality beech plywood 1520x750x4.0 mm |
1 x | MythoS 30E White/Blue |
1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
1 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | TopFuel LiPo 35C-POWER-X 2400mAh 2S |
1 x | Glass fabric 49 g/m² (1,27 x 5 m) |
1 x | Adapter 3,2 mm M6 |
1 x | Servo HITEC HS-5645 MG Digi |
2 x | Turnbuckle M2,5x32/48 (2pcs) |
1 x | Spare round blades, 28 mm, pack/ 2 pcs. |
1 x | Programador FUTABA USB CIU-3 |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | Swicht F14/FC-16 (3 pos) |
1 x | switch long 3-position DC Tx DUPLEX 2,4EX |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
1 x | Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs) |
1 x | Metalic motor holder for class 550-600 |
1 x | 20 mm carbon horn |
1 x | Sukhoi 29S 2,6 m White/Blue (SebART) |
1 x | Polyurethan FESTO hose 3x0,5 mm, transparent |
1 x | Cabel charger transmitter GRAUPNER |
1 x | Tygon tube 6.35 x 3.18 mm 15 m |
2 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
1 x | 22x10 BIELA pusher propeller |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
1 x | Size "M" motor holder for class 600 |
1 x | Esc MasterSPIN 99 Pro OPTO |
1 x | Cable coupler M3 (10 uds) |
1 x | Foam plastic plates (310x210x8 mm) |
1 x | LAESR 200 60" Red/White |
1 x | Servo HITEC HS-225 BB |
1 x | Transmitter JETI Duplex DS-24 EX Multimode |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | resin-hardener package L-385 with hardener H-385 (875 g) |
1 x | Rubber wheel Ø 70mm x 27mm (2pcs) axis Ø 3.6mm |
1 x | Brake for 140 mm wheels |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | Gracia Maxi ARF, bags (Top Model) |
1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
2 x | Servo FUTABA BLS 272SV |
2 x | Sebart 50E RED/BLUE (SebART) |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | Extension for SensorSwitch 30cm |
1 x | 2 mm male connector (2 pcs) with safety connector |
1 x | Cylinder DA-50R, DA-100, DA-100L |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | 32x18D BIELA propeller |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Gracia Maxi ARF, spare wings (Top Model) |
1 x | Cockpit metalic closing |
1 x | Wheel 22 mm |
1 x | resin-hardener L-385 H-385 (625 g) |
1 x | Futaba T6K-V2 8Ch 2.4 GHz T-FHSS Air |
1 x | |
2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Fiberglass plate 620x540x0,2 mm |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | 4 mm M3 red control terminal (4 pcs) |
1 x | wire tensioner (black) |
1 x | Towing hook <3m |
1 x | Propeller CFK 15x15 |
1 x | 23x8 BIELA propeller |
1 x | Servo HITEC HS-75BB Retract |
1 x | 3 mm Prop Adapter M6 |
1 x | Prelude ARF 2500 mm (TopModel) |
1 x | PBY 6/6A Catalina (aero-naut) |
1 x | PIT (Aero-Naut) |
1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
1 x | Short extra-strong control horn with bearing 2,8x15 |
1 x | switch short 3-position DC Tx DUPLEX 2,4EX |
1 x | DPSI 2001 RV |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Servo MKS HV 777A+ |
1 x | Red aluminium servo arm V2-Futaba 1,75" inch M3 |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
1 x | FESTO Polyurethan tube for turbine 6x4x1000 mm (transparent) |
1 x | Spinner INO 75 mm Chrome (Imitacion metal) |
1 x | JetiBOX |
1 x | Epoxy 40 min (Resin). 5 Kg |
2 x | 4 mm Prop Adapter M6 |
1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | Thixotropic agent TM 100, tin/ 75 g (approx. 1 l) |
1 x | 3,2 mm Prop Adapter M6 |
1 x | Frontal support Speed 600 |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm) |
1 x | ACTIVE ARF Electric 1.995 mm |
1 x | EDGE 540S 50E yellow/black (SebArt) |
1 x | Avia spare blue cockpit (Top Model) |
1 x | Multi-adapter balancer JST - TP |
1 x | Futaba FX36 2.4GHz FASST Test + R7008SB |
1 x | Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav |
1 x | SCHARNHORST accessories |
1 x | Universal Colour Paste deep black 250 g |
1 x | Xoar Electric Beechwood Prop 15x8 |
1 x | Spinner Alumin. propeller pleg. 30 mm / 5,0 mm |
1 x | 110x55 mm C SLH KOVO wheel |
1 x | 1,5x50 mm allen screwdriver |
1 x | XT-90 connector (pair) |
1 x | Adapter 3,2 mm M5 for spinner 30 mm fixed propeller |
1 x | PVC blue transparent battery termo-retract 95 mm (1 m) |
1 x | Propeller CFK 18,5x12 |
1 x | 45 mm rods set for direction control |
1 x | Receiver Crystal 35 Mc/s Ch 62 |
1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
1 x | Black large kwik link (10 pcs) |
1 x | 45 mm rods + T patellas set for direction control |
1 x | Ball link M3 (6 uds) |
1 x | Stainless steel 3 m Pull-Pull complet set (max 20 kg) |
1 x | ABS tube 14.0x10.0x1000 mm |
1 x | XH female balance (4S) connector (2 pcs) |
1 x | Straightened threaded rod M3 - 1m |
1 x | Aramid 50 daN 50 m |
1 x | Servo MKS HV6130 |
1 x | Epoxy Resin L + Hardener GL 1 (30 min) |
1 x | Spinner 60 mm GFK |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Propeller CFK 12.5x7 |
1 x | PVC lilac battery termo-retract 70 mm (10 m) |
1 x | Fiberglass plate 350x150x1.5 mm |
1 x | Jeti Black cap |
1 x | 13 mm wing servo holder |
1 x | PH5 adapter for 5mm M8 axi for AXI2820 y 2826 |
1 x | 3.17 mm Prop Adapter CN-Spinner |
1 x | 1/10 Pilot "Jack" |
1 x | Reed valve petal for DA 60 carburator |
1 x | DA-50R motor alumine support |
1 x | Gold aluminium servo arm V1-JR 1,25" inch M3 |
1 x | Turbine LYNX 130 |
1 x | Presto SF Light Filler styrene-free (420 g) |
1 x | Red 3m5 mm connector holder |
1 x | DUPLEX 2.4EX MULi 6s M |
1 x | Servo HITEC HS-7950TH Ultra Torque HV Coreless Titanium Gear Ser |
1 x | Bidule 111 3000 mm |
1 x | Excentric gearbox BB for motor 600, 3,2mm axis (2,8:1) |
1 x | 3,2x1000 mm 2:1 black termoretract tube |
1 x | Miss ULTIMATE 50E Red/Black |
1 x | Fiberglass 5000x1100 mm 49 g/m² |
1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
1 x | Servo HITEC HS-77 BB Low Profile |
1 x | RX external cable for estandar receivers |
1 x | Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs) |
1 x | Straightened threaded rod M2-1m |
1 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
1 x | Esc X-40-SB-Pro |
1 x | 5 mm Prop Adapter M6 |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Esc X-70-OPTO-Pro |
1 x | Wings for XCALIBUR (Deco: RAF) |
1 x | PIN Connector female (100 pcs) |
1 x | Servo TOPMODEL S7520 MG |
1 x | PH6 adapter for 6mm M10 AXI for AXI41xx |
1 x | LO 100 ARC 3.3m,cabina |
1 x | 69x25 mm (2.75") axle Ø4 mm aluminium core wheel |
1 x | XPower H PROP HUB Ø5.0/20mm +2,5° |
1 x | Propeller CFK 18x9 |
1 x | Battery RX JETI LiIon RB 2600 7.2v |
1 x | Spinner 104x131 mm 115 g CFK-BS |
1 x | Fiberglass plate 1200x1000x0,2 mm |
1 x | XH female balance (7S) connector (2 pcs) |
1 x | JSM XCALIBUR Trike Retracts Only |
1 x | Spinner Alumin. fixed propeller 45 mm / 5,0 mm |
1 x | Propeller MEJZLIK 22x10 Electric light (36 g) |
1 x | 140 mm rods + T patellas set for direction control |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | Epoxy Casting Resin + Hardener "water-clear" (300 min) |
1 x | FESTO Polyurethan tube for turbine 4x2,5x1000 mm (transparent) |
1 x | Epoxy 40 min. 4kg (Hardener) |
1 x | Release film 100 cm x 50 m |
1 x | Turbofan 2000 NG, rotor |
1 x | Transmitter JETI Duplex DC-24 EX Carbon Line Light BLUE Multimo |
1 x | SEBART S30 yellow/black (SebART) |
1 x | Conector JR Servo male (10 pcs) |
1 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | Canadair CL-415 (aero-naut) |
1 x | 22x8 BIELA propeller |
1 x | 4 mm Prop Adapter M8 |
1 x | Aluminum Fold Prop Spinner 50 mm / 6mm |
1 x | Esc X-70-SB-Pro 2-6S |
1 x | PT 21x13 EL Propeller 3 Blade |
1 x | Servo HITEC D625 MW |
1 x | Fuel dot Gold color |
1 x | Excentric gearbox for 2,3mm axis (2,33:1) |
1 x | PowerBox iGyro 3xtra |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | Blue aluminium servo arm V2-Hitec 1,25 inch M3 |
1 x | Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 5 m |
1 x | Spinner 80 mm GFK |
1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
1 x | DUPLEX 2.4 EX MVario2 |
1 x | Sensor DUPLEX 2.4EX MUI 200 |
1 x | Propeller MEJZLIK 21x10 Electric light (36 g) |
1 x | Gold aluminium servo arm V2-JR 1,25" inch M3 |
1 x | FESTO connector M5 Quick 4 mm |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | 1/6 Pilot "Tony" |
1 x | Carbon plate 700x550x0.5 mm |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | JSM XCALIBUR Fuel Tank 2.9 L |
1 x | Futaba Multi-Switch-Prop 12+2 DECODER |
1 x | Xplorer4 anemometro |
1 x | 6,4x1000 mm 2:1 green termoretract tube |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | Boat 140 mm |
1 x | Anchor of tow Met. 60 mm |
1 x | 6 mm Prop Adapter M8 |
1 x | 4,8x1000 mm 2:1 blue termoretract tube |
1 x | Round Rod 3,0x1000 mm |
1 x | ALMIRALSANKER anchor 40 mm (2 uds) |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | Stickers-digit for marking |
1 x | Rigid coupling brass Ø 3 mm L: 20 mm |
1 x | Monokote BLUE metalizado (1.8x0.65m) |
1 x | Railing Ø 2mm (20 pcs) |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | Allen wheel collar M3x5 |
1 x | Spring lock washer 3.1 mm (20 pcs) |
|
109,324.84EUR |