3 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | 100 mm rods set for direction control |
2 x | 140 mm rods set for direction control |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | 100 mm rods + T patellas set for direction control |
2 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | 140 mm rods + T patellas set for direction control |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
2 x | Canopy Latch |
1 x | Allen wheel collar M3x3 |
3 x | 250 mm / 16 mm Airbrakes |
1 x | Cable grommet Ø 4 mm (4 uds) |
2 x | Allen wheel collar M3x5 |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
3 x | Cable grommet Ø 5 mm (4 uds) |
1 x | 90 mm rods + T patellas set for direction control |
1 x | 28x5 mm wires output (2 pcs) |
4 x | Aluminium alloy coupler for carbon tube 6/M4 |
4 x | Cable grommet Ø 3.2 mm (4 uds) |
2 x | Allen wheel collar M4x6 |
2 x | 80 mm rods set for direction control |
2 x | 45 mm rods + T patellas set for direction control |
1 x | 45 mm rods set for direction control |
2 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Cable tie mounts 4.3 (4 uds) |
2 x | 38x4,5 mm wires output (2 pcs) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
2 x | Pushrod octagone 3/2 |
2 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
2 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
2 x | Pushrod octagone 4/3 |
1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
3 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod M3 |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
2 x | Circlick securite |
1 x | BEC 3A FOXY |
2 x | JETImodel SINGLE BEC |
2 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | CC 03 |
3 x | Motor DLE 430 cc - Paramotors |
1 x | Dean "T" - Futaba Adapter |
2 x | Cabel charger transmitter GRAUPNER |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
2 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Silent-blocks DLE 170M |
1 x | 30 cm BEC cable (female) |
1 x | CC 01 |
2 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
2 x | CC 05 |
2 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
1 x | XH female balance (2S) connector (2 pcs) |
1 x | Wing connector 8pin with pin strip, plug & socket |
2 x | XH female balance (3S) connector (2 pcs) |
1 x | Connectors banna oro 6,0 mm (M/F) |
1 x | Connector CAN 15 |
1 x | Banna gold connector 2,5 mm (M/F) |
1 x | Connectors banna oro 8,0 mm (M/F) |
1 x | Conector BEC female (10 pcs) |
1 x | 30 cm DEANS female connector |
1 x | XH male balance (5S) connector (2 pcs) |
1 x | Connectors DEANS 4 pins (1 pair) |
1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | Connectors banna oro 4 mm (M/F) |
1 x | Gold antispark 4 mm plug |
1 x | Connectors DEANS (T) |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Gold antispark 5,5 mm plug |
1 x | Conector BEC male (10 pcs) |
2 x | Connectors banna oro 3,5 mm (M/F) |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Round Rod 1,0x1000 mm |
1 x | Field folding model stand SebArt |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | M3 black washers (4 pcs) |
1 x | 41x5,5 mm wires output (2 pcs) |
2 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Parachute BACKUP X100 |
1 x | Snap short M2 (10 uds) |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | Wheel collar 4 mm Ø (4 uds) |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
2 x | Landing gear frontal support 29x26x13,5 |
1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
1 x | DEMON CORTEXpro |
1 x | SPARK Switch 12v |
1 x | Small Crow DLE-170M |
2 x | GPS, Vario and altitude Sensor SBS-01G |
2 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
2 x | Female connector for 6 pines AWG |
1 x | MPX-Dean "T" Adapter |
1 x | Carbon plate 350x150x3.0 mm |
3 x | Male connector JST SH 1.0mm with 10 cm wire |
1 x | Hacker X-Pro USB interface V2 |
1 x | SPS 70V 140/280 A |
1 x | Extension 6 lipos XH > EH |
2 x | 4 LiPo XH>EH adapter |
1 x | Long Switch On/Off micro |
1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
3 x | PSC 5 |
2 x | Motor DLE 200cc Std |
1 x | wing/fuselage connector for 12 pines AWG 20-24 |
1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
1 x | Extension silicon 30 cm female (Graupner) |
1 x | 1/6 Pilot "John" |
1 x | 12.7 mm 2:1 black termoretract tube |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | 1/10 Pilot "Jimmy" |
1 x | PVC yellow transparent battery termo-retract 69 mm (10 m) |
1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | 1/6 Pilot "Garry" |
1 x | 6,4x1000 mm 2:1 black termoretract tube |
1 x | 3,2x1000 mm 2:1 red termoretract tube |
1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
1 x | Snap long M2 (10 uds) |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Multi-adapter balancer JST/C - TP |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | USB interface ALTIS |
1 x | SPARK Switch 7.4v |
2 x | Prolonguer for Balancer Thunder Power 6S |
2 x | Male Prolonger TP 4/5S |
1 x | Big Crow DLE-170M |
2 x | Opto Gas Engine Kill Switch |
1 x | EWC3 40 cm wing connector |
1 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | SBEC 40 |
1 x | Pins M connect Multipin connectors AWG 20-24 |
1 x | Three-position switched channel, short |
1 x | Male connector for 10 pines AWG |
2 x | Propeller FALCON 32,5x11 PUSHER Carbono |
1 x | Conector JAPAN G2 Set 5 pares |
1 x | Contacto macho pin conector (10 pcs) |
1 x | Connectors MPX black male |
1 x | XH female balance (4S) connector (2 pcs) |
1 x | Connectors MPX 8 pins with support (black) 1 pair (male-female) |
1 x | XH male balance (4S) connector (2 pcs) |
1 x | Conector Servo female 4 pines |
1 x | Motor A2212/13T |
3 x | Cargador para AA/AAA Ni-MH & Ni-Cd |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
4 x | Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR) |
1 x | 6,4x1000 mm 2:1 green termoretract tube |
1 x | Cockpit latch closing I=10 mm |
1 x | 51 mm INO spinner (carbon imitation) |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Spinner Alumin. fixed propeller 50 mm / 4,0 mm |
1 x | Spinner INO 57 mm Chrome (Imitacion metal) |
1 x | Spinner INO 82 mm Chrome (Imitacion metal) |
1 x | Clip mini fixing for wing (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
1 x | Vess propeller 13x6 S |
1 x | SBEC 30 D |
2 x | Male connector for 6 pines AWG |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Lead with adhesive (2 pcs) |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Tip wing protector 30x10 (2 pcs) |
1 x | 6x4 tree blades propeller |
1 x | DPSI Micro MPS |
2 x | Steering arm 12 mm Ø 4 mm |
2 x | Cockpit plastic closing |
1 x | F3A carbon 85 mm spinner for Hacker Q-80 |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
1 x | Cockpit metalic closing |
1 x | Spinner INOVA 102 mm Black |
1 x | Extension 5 lipos JST/C - JST |
1 x | Male connector for 12 pines AWG |
1 x | Interruptor SPS 70v 60/120A |
1 x | MAX BEC |
1 x | Female connector for 20 pines AWG |
1 x | MAX BEC 2D plus EX |
1 x | Electronic switch JETI SP06 Opto |
1 x | SWTU2 switch |
1 x | FX three-position switched channel, long |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Landing gear frontal support 25x32x16 |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Split M1,2x10 (10 pcs) |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Split pin 1x8 mm (10 uds) |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | Snap pin for micro clevis (10 uds) |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | DPS Switch JR/JR |
1 x | DPSI V-Match |
1 x | Propeller MASTER 7x5 |
1 x | Propeller POWER-PROP 12x6 |
1 x | DPSI Micro - RCS RV |
1 x | PSC 6 |
1 x | HBC 10035-3 32-Bit |
1 x | Connector Sub-D 2+5 Male |
1 x | CC 02 |
1 x | 2 LiPo XH>EH adapter |
2 x | Charger LiPo Charger4 |
1 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
|
26,303.44EUR |