| 2 x | Plasti Dip Liquid Tape 429 ml orange |
| 1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
| 2 x | 1000 ml sealer (DOPE) |
| 2 x | 500 ml sealer (DOPE) |
| 2 x | Spray Graphit 33 |
| 2 x | Hobbylite Filler, Balsa colour |
| 2 x | Spray EC Red 400ml |
| 2 x | Plasti Dip Liquid Tape 429 ml black |
| 2 x | Painting GHT Lexan Black 150 ml |
| 2 x | Partall paste 650 g |
| 2 x | 20 g tin paste |
| 2 x | Universal Colour Paste white 50 g |
| 1 x | Plasti Dip Liquid Tape 429 ml black |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | Locking cable tie 4.6x203 (uds) |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 1 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 1 x | SUS wire 3m (nylon coated) |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | One touch canopy lock |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | Steering arm 16 mm Ø 3 mm |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Screw-lock connector M2 (2 uds) |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Canopy Latch |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Cierre cabina aluminio Ø4, I=10 mm |
| 1 x | Cockpit plastic closing |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Universal Colour Paste deep black 50 g |
| 1 x | Nitroverdu 500 ml |
| 1 x | Straightened rod Ø 4.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 3.0 mm x 1000 mm |
| 1 x | PARTALL® Hi-Temp Wax, 340 g |
| 1 x | Brass rod Ø 0.5 mm x 1000 mm |
| 2 x | Paint gun for sprays |
| 1 x | Spray YELLOW Inca Lexan 150ml |
| 1 x | Straightened threaded rod M3 - 1m |
| 1 x | Straightened rod Ø 7.0 mm x 1000 mm |
| 1 x | Brass rod Ø 0.8 mm x 1000 mm |
| 1 x | Straightened rod Ø 1.5 mm x 1500 mm |
| 1 x | Motor DLE 170 M- Paramotors |
| 1 x | Straightened rod Ø 0.5 mm x 1000 mm |
| 1 x | Silicone adhesive ELASTOSIL® E4, tube/ 90 ml |
| 1 x | |
| 1 x | Motor DLE 430 cc - Paramotors |
| 1 x | Brass rod Ø 1.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 1.5 mm x 1000 mm |
| 2 x | Silent-blocks DLE 170M |
| 1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
| 2 x | Straightened rod Ø 2.5 mm x 1000 mm |
| 2 x | Straightened rod Ø 1.0 mm x 1000 mm |
| 2 x | Aluminium rod Ø 4.0 mm x 3000 mm |
| 1 x | Spray adhesive INFUTAC (Clear) 500 ml |
| 1 x | Straightened rod Ø 4.5 mm x 1000 mm |
| 1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
| 2 x | Universal Colour Paste deep black 250 g |
| 1 x | Straightened threaded rod M2-1m |
| 1 x | Straightened rod Ø 5.5 mm x 1000 mm |
| 1 x | Spray adhesive AEROFIX 2 |
| 1 x | RF9 Flight Simulator with Spektrum Controller |
| 1 x | GameCommander USB Universal |
| 1 x | Interface Jack Adapter IKARUS |
| 1 x | SIMtransmitter 6 Mode 2 |
| 1 x | Propeller POWER-PROP 13x9 |
| 1 x | Socket head ball link M3 (2 uds) |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | Xplorer3 anemometro |
| 1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | Crimping tool |
| 1 x | Field folding model stand |
| 1 x | Spring lock washer 3.1 mm (20 pcs) |
| 1 x | ABS "T" angle 8.0x8.0x1000 mm |
| 1 x | Parachute P4 |
| 1 x | Rescue 1,8m2 / BackPack |
| 1 x | Presto SF Light Filler styrene-free (420 g) |
| 1 x | Straightened rod Ø 1.2 mm x 1500 mm |
| 1 x | Sparkplug 1/4-32 |
| 1 x | Reed valve for DA 50-R |
| 1 x | PowerBox Smokepump JETs 2x outside |
| 1 x | Servoholder Dymond DS 1800 MG Digital (2 pcs) |
| 1 x | Kit wheel loader 966G II without electrics, without hydrauli |
| 1 x | SAVOX SH 0254 servo |
| 1 x | Servo KST X10 MINI wing 10mm 23g 7.5Kg |
| 1 x | 10-15mm Servo Arm HITEC |
| 1 x | Servo SAVOX SB-2290 SG |
| 1 x | Servo TOPMODEL S7520 MG |
| 1 x | Gear for D 200 BX |
| 1 x | Servo KST X15-1208 V8.0 13.5Kg HV |
| 1 x | Servo KST X10 V2.0 ala 10mm 28g 10.8Kg |
| 1 x | Propadapter for motor A60-V2 |
| 1 x | Propeller diller for DA50, DLE55 red |
| 1 x | Propeller diller for DLE170 |
| 1 x | Servo KST A08H V6.0 3,2Kg HV |
| 1 x | HITEC DPC-11 programmer |
| 1 x | Savox Brushless Servo SC-1267 SG |
| 1 x | Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor |
| 1 x | Ball Bearings for motor A60-V2 |
| 1 x | Servo KST X06H - 1.8Kg.cm 7mm 6g |
| 1 x | 65 mm mini servo cover |
| 1 x | SERVO DES 568 MG |
| 1 x | Servo Dymond D 37 Eco |
| 1 x | Servo TOPMODEL DS1413 T |
| 1 x | Carbon fiber rod 2.0 mmx1000 mm |
| 1 x | Kavan Car 25% nitro 1l |
| 1 x | Carbon fiber rod 1.5 mm x 2000 mm |
| 1 x | Universal Charging Lead - 500mm - 4mm to Glow Plug Igniter |
| 1 x | Servo GO-12S70MG 20.5kg.cm 0.06s/60º |
| 1 x | Gear set HITEC HS-125MG/5125MG |
| 1 x | Gear set HITEC HS-55 |
| 1 x | PS-050 TONEGAWA Servo |
| 1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
| 1 x | 290 mm M4/4 mm Prop shaft |
| 1 x | 300x4 mm M4 shaft ship |
| 1 x | 2,3 mm Prop Adapter M6 |
| 1 x | 3.17 mm Prop Adapter CN-Spinner |
| 1 x | 3,2 mm Prop Adapter M6 |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | Spare Part Frame Set for EACHINE RACER 250 |
| 1 x | 2 mm Prop Adapter M6 |
| 1 x | 16x10 tree blades propeller Master Airscrew |
| 1 x | 3 mm Prop Adapter M6 |
| 1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
| 1 x | 10 mm portholes (10 pcs) |
| 1 x | 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller) |
| 1 x | Brass rod Ø 1.5 mm x 1000 mm |
| 1 x | 250 mm / 16 mm Airbrakes |
| 1 x | Short extra-strong control horn with bearing 2,8x15 |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
| 1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
| 1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
| 1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
| 1 x | Small aluminium horn blue (2pcs) |
| 1 x | Swing 1000 |
| 1 x | TMM 1210-3S heli |
| 1 x | Strip 2,0x2,0x330 mm |
| 1 x | Strip ABS 2.0x8.0x1000 mm |
| 1 x | ABS Strip 1.0x2.0x1000 mm |
| 1 x | Round Rod 1,0x1000 mm |
| 1 x | Landing gear axle Ø 4 mm (2 uds) |
| 1 x | Micro control horn (2 pcs) |
| 1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
| 1 x | Small adjustable control horn with bearing |
| 1 x | ABS Strip 1.5x2.0x1000 mm |
| 1 x | Strip 2,5x1,25x330 mm |
| 1 x | Extension Arm for Carburetor (red) |
 |
| 13,980.21EUR |
