| 1 x | White smoke bombs AX-18 (5 pcs) |
| 1 x | White smoke canister 100 g |
| 2 x | AX-60 starters (5 pcs) |
| 1 x | Yellow smoke canister 65 g |
| 1 x | Green smoke canister 100 g |
| 1 x | 3l Smoke oil |
| 2 x | Blue smoke canister 140 g |
| 1 x | Smoke set "M" |
| 1 x | Red smoke canister 100 g |
| 2 x | Yellow smoke bombs AX-60 (5 pcs) |
| 2 x | Smoke set "Glider" |
| 1 x | AX-60 starters (5 pcs) |
| 2 x | Black smoke bombs AX-60 (5 pcs) |
| 1 x | Blue smoke canister 100 g |
| 2 x | PCARD Wireless System |
| 2 x | Initior Receiver FRX2 Wireless |
| 2 x | White smoke bombs AX-9 (10 pcs) |
| 1 x | Remote electric ignition system |
| 2 x | Green smoke canister 140 g |
| 3 x | Mixers smoke bombs AX-60 (5 pcs) |
| 2 x | White smoke canister 65 g |
| 1 x | "M" set |
| 1 x | Green smoke canister 65 g |
| 2 x | Red smoke canister 65 g |
| 2 x | Strip 1,5x1,5x330 mm |
| 3 x | ABS Strip 1.5x6.0x1000 mm |
| 1 x | Round Rod 4,0x1000 mm |
| 1 x | ABS Strip 1.0x2.0x1000 mm |
| 1 x | Round Rod 1,25x1000 mm |
| 1 x | Ballast 700gr OPALE |
| 2 x | Rescue 1,8m2 / BackPack |
| 1 x | Trike XL motor set (motor+esc+prop) |
| 1 x | Parachute PV6 for F3J |
| 1 x | Parachute BACKUP X100 |
| 1 x | Parachute P4 |
| 1 x | Para-RC Mix |
| 1 x | Paramotor Kit Camo H1.5/ Ben Red |
| 1 x | Set cintas unión paracaídas 145 cm |
| 2 x | Wing OXY 5,0 m2 |
| 2 x | Para-RC "RC-Evo-Cross" Rescue |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | Pine wood slat 6.0x6.0x1000 mm |
| 2 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | Pine wood slat 3.0x5.0x1000 mm |
| 2 x | BALSA triangular 6x6x1000 mm |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 2 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 2 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 2 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
| 1 x | Monokote ROJO misil (1.8x0.65m) |
| 1 x | Oracover Yellow CUB 2 m |
| 1 x | Aluminium cap bolt washer M3 green (8 pcs) |
| 1 x | Interface Realflight Simulator |
| 1 x | Couple M4 for wire (10 pcs) |
| 1 x | Horn 16,5x20 mm (2 pcs) |
| 1 x | 1/6 Pilot "Garry" |
| 1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
| 2 x | resin-hardener package L-385 with hardener H-385 (3.5 Kg) |
| 2 x | Mould Resin P 10 kg |
| 1 x | Red smoke canister 140 g |
| 1 x | Yellow smoke canister 140 g |
| 3 x | White smoke bombs AX-60 (5 pcs) |
| 2 x | "S" set for planes |
| 1 x | Bateria DJI Mini 2 2250 mAh |
| 2 x | TS832 to Gopro AV/Power Cable |
| 1 x | Fiberglass plate 620x540x0,2 mm |
| 1 x | ABS Strip 1.0x5.0x1000 mm |
| 1 x | Strip 2,5x1,25x330 mm |
| 1 x | ABS Strip 1.5x4.0x1000 mm |
| 1 x | Round Rod 6,0x1000 mm |
| 1 x | Strip 3,5x1,75x330 mm |
| 1 x | Strip ABS 2.0x3.0x1000 mm |
| 1 x | White smoke canister 140 g |
| 1 x | B4-0 rocket charges (6 pcs) |
| 1 x | ABS Strip 1.5x3.0x1000 mm |
| 1 x | ABS I Strip 20x10x1000 mm |
| 1 x | Ventral support for AX-18/AX-60 |
| 1 x | Round Rod 2,5x1000 mm |
| 2 x | Strip ABS 2.0x10.0x1000 mm |
| 1 x | Yellow smoke canister 100 g |
| 1 x | |
| 1 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | CORTEX |
| 1 x | Fresa corte diamante Ø 1.4mm (bola) |
| 1 x | Boxed KIT OF 7 Rotary Burrs FINE |
| 1 x | |
| 1 x | EC-Cutter |
| 2 x | Wing OXY 0,5 pulgadas2 |
| 1 x | Paramotor Trike XL |
| 1 x | quality beech plywood BIRCH 600x300x2.0 mm |
| 1 x | Foam plastic plates (310x210x2 mm) |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | A/C quality beech plywood 600x300x0.6 mm |
| 1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
| 1 x | Carbon plate 550x350x2.5 mm ECOTECH |
| 1 x | Styrene plate 320x120x0.5 mm |
| 1 x | Carbon plate 550x350x3.0 mm ECOTECH |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
| 1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
| 1 x | Epoxy 30 min. 200g |
| 1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
| 1 x | Epoxy 10 min 190g |
| 1 x | Adhesive epoxy structures RESOLTECH 3350 (1 kg) |
| 1 x | Catalyst RESOLTECH 3357-T (0.45 Kg) Suitable for adhesive 3350/1 |
| 2 x | Hardener P-25, canister 2.5Kg |
| 1 x | Epoxy Resin L + Hardener L (40 min) 240g (200g Resin L + 40g Har |
| 1 x | resin-hardener package L-385 with hardener H-385 |
| 1 x | White gelcoat 1 Kg |
| 1 x | Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g |
| 1 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
| 1 x | Epoxy Resin L + Hardener GL 1 (30 min) |
| 1 x | Hardener Aero EPH 161 (250 g) |
| 1 x | Epoxy Resin L + Hardener CL (60 min) kit/ 930 g |
| 1 x | Epoxy 5 min. 500 g (Resin) |
| 1 x | Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min) |
| 1 x | Epoxy 40 min (Resin). 25Kg |
| 1 x | Epoxy 40 min (Hardener). 1 Kg |
| 1 x | Epoxy Resin L + Hardener L (40 min) 3.5 Kg (2.5 kg Resin L + 1 k |
| 1 x | Hardener Aero EPH 161 (500 g) |
| 1 x | Foaming agent for epoxy resins 200 g |
| 1 x | Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs |
| 1 x | Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey) |
| 1 x | resin-hardener L-385 H-385 (625 g) |
| 1 x | resin-hardener L-385 H-385 (1250 g) |
| 1 x | Epoxy 40 min (Hardener). 10Kg |
| 1 x | Epoxy L 40 min. 10 kg (Resin) |
| 1 x | Epoxy 5 min. 500 g (Hardener) |
| 1 x | resin-hardener L-385 H-385 (5000 g) |
| 1 x | Epoxy Resin L + Hardener L (40 min) 1Kg (715g Resin L + 285g Har |
| 1 x | Epoxy 5 min. 200g |
| 1 x | Epoxy Resin L + Hardener LT kit/ 3125g |
| 1 x | Epoxy Resin L + Hardener LT kit/ 895g |
| 1 x | Screw-lock connector M2 (2 uds) |
| 1 x | 55% silver electrodes (2 pcs) |
| 1 x | Parachutist |
| 1 x | F450/550 Quadcopter, landing gear |
| 1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
| 1 x | Plastic caps for AIR BURTS (30 pcs) |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | Spinner Alumin. fixed propeller 40 mm / 4,0 mm |
| 1 x | AXI 2826/8 V2 |
| 1 x | AXI 2826/10 V2 |
| 1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
| 1 x | 50 mm aluminium spinner (Kavan) |
| 1 x | 55 mm aluminium spinner (Kavan) |
| 1 x | Ciano KAVAN Thick 20g |
| 1 x | Combo KAVAN C3536-1250 + KAVANA R50SB + |
| 1 x | Smart Soldering Iron 110W/230V AC |
| 1 x | Sealing Iron Profi LCD |
| 1 x | Starter EM Gear Power 80 |
| 1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
| 1 x | Sub-D Plug Mold |
| 1 x | Soldering tip for KAVAN soldering iron KAV66.8338 |
| 1 x | Sealing Iron Sleeve STD |
| 1 x | PROXXON - SAW BLADE HSS (50MM - 100T) (28020) |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | Spare Part Frame Set for EACHINE RACER 250 |
| 1 x | Quadcopter Q50 Kit Carbon Fiber |
| 1 x | OPUS-V / Jet-CC-BF |
| 1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
| 1 x | Charger LiPo Charger4 |
| 1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
| 1 x | Spinner Alumin. fixed propeller 40 mm / 5,0 mm |
| 1 x | Combo KAVAN PRO 3536-1000 + RAY 40 SB |
| 1 x | Decorative caps, multicoloured |
| 1 x | Fibreglass-Spinner BS ∅155 x 200 mm |
| 1 x | KIRA 400-27 |
| 1 x | AXI 2820/8 V2 Long |
| 1 x | AXI 2820/8 V2 |
| 1 x | AXI 2820/14 V2 |
| 1 x | AXI 2808/16 V2 Long |
| 1 x | AXI 2820/12 V2 |
| 1 x | AXI 2814/12 V2 |
| 1 x | Debonder CA 20g |
| 1 x | Blade holder metal LAMA |
| 1 x | Conector MR-60 (pareja) |
| 1 x | Concave-Convex sandpaper file 13 mm |
| 1 x | Crawler GRE-24 RTR 1:24 Arena |
| 1 x | Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB |
| 1 x | Birch plywood plate 600x300x1.5 mm |
| 1 x | Combustible Glow "KAVAN" air/heli 15% nitro |
| 1 x | Screwdriver for Torx® TX8 |
| 1 x | PROXXON - SAW BLADE DIAMOND OZI/E |
| 1 x | Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs) |
| 1 x | Screwdriver for Torx® TX6 |
| 1 x | Spare round blades, 28 mm, pack/ 2 pcs. |
| 1 x | Schul-Malpinsel Gr.5 |
| 1 x | Starter Sullivan-STAR 601 |
| 1 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
| 1 x | Rubber Insert hard, 1 Pcs. |
| 1 x | Sealing Iron Sleeve PROF |
| 1 x | Sandpaper file 13 mm |
| 1 x | Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs) |
| 1 x | AXI 2814/16 V2 Long |
| 2 x | Walnut wood slat 3.0x3.0x1000 mm |
| 2 x | Fiberglass 280 g/m² 5000x1000 mm |
| 2 x | Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain) |
| 2 x | BALSA trip 10x10x1000 mm |
| 2 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
| 2 x | Pine wood slat 2.0x10.0x1000 mm |
| 2 x | BALSA triangular 10x10x1000 mm |
| 2 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | Fiberglass 163 g/m² 1m x 5 m (Twill) |
 |
| 16,582.42EUR |
