| 1 x | 11x7 tree blades propeller |
| 1 x | Quicklock washer 2.5 mm (10 pcs) |
| 1 x | Propeller APC 13x8 Electric |
| 1 x | Adapter lead MPX/EC3 |
| 1 x | Crystal Universal RX 35.020 Ch 62 |
| 1 x | EasyFLY Addon |
| 1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
| 1 x | Propeller APC 11x5.5 Electric |
| 1 x | Propeller APC 10x7 Electric |
| 1 x | Propeller APC 11x4.7 SF |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | Circlick securite |
| 1 x | BEC 3A FOXY |
| 1 x | 30 cm BEC cable (female) |
| 1 x | 29,0 mm propeller (rigth propeller) |
| 1 x | 12 mm mast holder |
| 1 x | 25 mm fenders (10 pcs) |
| 1 x | Propeller APC 12x3.8 SF |
| 1 x | 2 mm Prop Adapter M6 |
| 1 x | Lock washer 2.7 mm (20 pcs) |
| 1 x | Vest clothes Hispano Aviación |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Flap hinge 33x9 mm (6 pcs) |
| 1 x | Gates hinge 30x16 mm (2 pcs) |
| 1 x | 15 mm reinforced hinge |
| 1 x | Locking cable tie 4.6x203 (uds) |
| 2 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Cierre cabina aluminio Ø4, I=10 mm |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
| 1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
| 1 x | Pin type hinge Al 6x98 mm (2 pcs) |
| 1 x | ABS tube 9.0x7.0x1000 mm |
| 1 x | Socket head long ball link M3 (6 uds) |
| 1 x | Round Rod 1,5x1000 mm |
| 1 x | PVC 0,25 qmm servos wire Graupner (5 m) |
| 1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
| 1 x | Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC |
| 1 x | Oratex Yellow Cub 10 m |
| 1 x | Extension 100 cm (Futaba) |
| 1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
| 1 x | Extension silicon 10 cm (Graupner) |
| 1 x | Round Rod 2,5x1000 mm |
| 1 x | ABS Strip 1.0x4.0x1000 mm |
| 1 x | 100m servo "Premium" wire (white/red/blue) |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | PT 21x13 EL Propeller 3 Blade |
| 1 x | Carbon fiber rod 2.0 mmx1000 mm |
| 1 x | Initior Transmitter FTX2 Wireless |
| 1 x | Propeller 10x4,7 SlowFlyer |
| 1 x | Fresa corte diamante Ø 1.4mm (bola) |
| 1 x | Remote electric ignition system |
| 1 x | Horn DUBRO 1/2A |
| 1 x | Fresa corte diamante Ø 2.35mm (lentil) |
| 1 x | Carbon fiber rod 20 mmx1000 mm |
| 1 x | Stickers-digit for marking |
| 1 x | Concave-Convex sandpaper file 13 mm |
| 1 x | Landing gear retract neumatic (Jet Legend) |
| 1 x | SERVO DES 588 BB MG |
| 1 x | Aluminium cap bolt washer M3 red (8 pcs) |
| 1 x | Propeller APC 12x8 SF |
| 1 x | Propeller APC 12x8 Electric |
| 1 x | Propeller APC 10x3,8 SF Electric Pusher |
| 1 x | 31,0 mm propeller (rigth propeller) |
| 1 x | Cabel charger transmitter GRAUPNER |
| 1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | 2.3 mm Adapter for 30 mm spinners |
| 1 x | Propeller APC 10x7 SF |
| 1 x | Micro Crystal RX 35.120 Ch 72 |
| 1 x | 3 mm Leader (L 100 mm) |
| 1 x | Flat washer 2.7 mm (20 uds)pcs) |
| 1 x | Quicklock washer 1 mm (10 pcs) |
| 1 x | Propeller APC 14x10 Electric |
| 1 x | Swing 1000 |
| 1 x | Fast'n EZ-CA-Hinge (12 uds) |
| 1 x | Micro flex hinge (12 uds) |
| 1 x | ABS tube 5.0x4.0x156 mm |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Cap Hispano Aviación |
| 1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | ABS tube 2.0x1.0x1000 mm |
| 1 x | Long pinned hinge (6 uds) |
| 1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 2 x | ABS tube 3.0x2.0x1000 mm |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 1 x | Glases Stratus |
| 1 x | Oracover Yellow CUB 10 m |
| 1 x | Conector BEC female (10 pcs) |
| 1 x | Round Rod 1,0x1000 mm |
| 1 x | Ply-Span 450x600/13g White |
| 1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
| 1 x | ABS Strip 1.5x8.0x1000 mm |
| 1 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
| 1 x | Oracover Yellow CUB 2 m |
| 1 x | Futaba male 40 cm extension |
| 1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
| 1 x | ABS I Strip 20x10x1000 mm |
| 1 x | Motor OS 3820-1200 electric |
| 1 x | White silicone 0,25 qmm wire (100 m) |
| 1 x | Extension 90 cm (Futaba) |
| 1 x | 2,0x50 mm allen screwdriver |
| 1 x | Buy Perforated film 100 cm / 50 m |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | Carbon fiber rod 16 mm x 1000 mm |
| 1 x | Brass control horn M2 long for wire (10pcs) |
| 1 x | 5 mm M2 variable horn |
| 1 x | V tail SILENT DREAM 2.200 mm (Elec or Glider) |
| 1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
| 1 x | Digital scale up to 40 kg |
| 1 x | FIALA Propeller 23x8 Electric |
| 1 x | Nose OPTIMA 2.200 mm (Elec or Glider) |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | B4-0 rocket charges (6 pcs) |
| 1 x | Extinguisher CO2 - 2 Kg |
| 1 x | Transmitter Crystal 35 Mc/s Ch 77 |
| 1 x | Crystal TX 35.180 Ch 78 |
| 1 x | Receiver Crystal 35 Mc/s Ch 62 |
| 1 x | Lock washer 2.2 mm (20 pcs) |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 1 x | M3 black washers (4 pcs) |
| 1 x | Aluminium cap bolt washer M3 black (8 pcs) |
| 1 x | Circlik for shaft 1.5 mm (10 pcs) |
| 1 x | 10 mm portholes (10 pcs) |
| 1 x | Flat washer 2.2 mm (20 pcs) |
| 1 x | 30 cm BEC cable (male) |
| 1 x | 12 mm portholes (10 pcs) |
| 1 x | 12x8 tree blades propeller |
| 1 x | Propeller APC 13x6.5 Electric Pusher |
| 1 x | Circlik for shaft 1.2 mm (10 pcs) |
| 1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 1 x | Aluminium wide washer M4 Black (4 pcs) |
| 1 x | Propeller APC 10x5.5 MR Electric multirrotor PUSHER |
| 1 x | 10 mm Prop Adapter M12 |
| 1 x | Crystal Universal RX 35.120 Ch 72 |
| 1 x | Propeller APC 13x10 Electric |
| 1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
| 1 x | Propeller APC 10x4.7 |
| 1 x | Propeller APC 11x4.5 Electric Pusher |
| 1 x | Servo NARO Max Std |
| 1 x | 4 LiPo XH>EH adapter |
| 1 x | Aluminium wide washer M3 red (4 pcs) |
| 1 x | CC 03 |
| 1 x | Propeller APC 14x12 Electric |
| 1 x | Circlik for shaft 2.3 mm (10 pcs) |
| 1 x | TrainerCord (master-learner) |
| 1 x | 3 LiPo XH>EH adapter |
| 1 x | Spring lock washer 4.1 mm (20 pcs) |
| 1 x | Propeller APC 10x10 Electric |
| 1 x | 3,2 mm Prop Adapter M8 |
| 1 x | Interface Jack Adapter IKARUS |
| 1 x | Flat washer 4.3 mm (20 pcs) |
| 1 x | Hovercraft sailcloth |
| 1 x | Aluminium cap bolt washer M3 green (8 pcs) |
| 1 x | Xoar Electric Beechwood Prop 20x10 |
| 1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 1 x | ABS tube 20.0x18.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
| 1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | ABS tube 3.0x2.0x330 mm |
| 1 x | Small pinned hinge (12 uds) |
| 1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | One touch canopy lock |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
| 1 x | Steering arm 16 mm Ø 3 mm |
| 1 x | ABS tube 18.0x16.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
| 1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
| 1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 1 x | ABS tube 3.0x1.0x1000 mm |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | ABS tube 16.0x14.0x1000 mm |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | Canopy Latch |
| 1 x | Screw-lock connector M2 (2 uds) |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | ABS tube 4.0x2.0x1000 mm |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | ABS tube 4.0x3.0x1000 mm |
| 1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Flap hinge (6 pcs) |
| 1 x | Cockpit plastic closing |
| 1 x | ABS tube 12.0x10.0x1000 mm |
| 1 x | ABS tube 7.0x6.0x1000 mm |
| 1 x | Gates hinge black 30x16 mm (2 pcs) |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
| 1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 1 x | ABS tube 9.0x8.0x1000 mm |
| 1 x | 25 mm reinforced hinge |
| 1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
| 1 x | ABS tube 5.0x4.0x1000 mm |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | ABS tube 6.0x5.0x1000 mm |
| 1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 1 x | Shirt Hispano Aviación |
| 1 x | Large flex hinge (12 uds) |
| 1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 1 x | ABS tube 8.0x6.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
| 1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
| 1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
| 1 x | SUS wire 3m (nylon coated) |
| 1 x | Gates hinge aluminium (1 pcs) |
| 1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
| 1 x | ABS tube 7.0x5.0x1000 mm |
| 1 x | ABS tube 5.0x3.0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
| 1 x | ABS angle 4,0x4,0x1000 mm |
| 1 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
| 1 x | Silicone red 0,25 mm² wire (25 m) |
| 1 x | M2,5 5Diam black ball link V2 (2 pcs) |
| 1 x | Jeti Black cap |
| 1 x | 1/12 Pilot "Langley" |
| 1 x | Papel japones 12 grs/m2 760x510 mm JAPICO |
| 1 x | Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC |
| 1 x | Extension silicon 35 cm male (Futaba) |
| 1 x | Glases Moritz |
| 1 x | 1/7 Pilot "Japanese" |
| 1 x | M2 5Diam short black ball link V2 (2 pcs) |
| 1 x | Short ball link M3 (6 uds) |
| 1 x | Oracover Azul 2 m |
| 1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
| 1 x | Prolongador S-Bus JR/JR 10cm |
| 1 x | Extension for SensorSwitch 60cm |
| 1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
| 1 x | Monokote ROJO misil (1.8x0.65m) |
| 1 x | Oracover CARBON Metalic 1 m |
| 1 x | Joint with bearing M3 22x5,5 |
| 1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
| 1 x | Socket head ball link M3 (2 uds) |
| 1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
| 1 x | Extension silicon 100 cm (Futaba) |
| 1 x | ABS "T" angle 10.0x10.0x1000 mm |
| 1 x | ABS Strip 1.5x3.0x1000 mm |
| 1 x | Connectors banna oro 6,0 mm (M/F) |
| 1 x | Oracover ROYAL RED 2m |
| 1 x | Connectors banna oro 2 mm (M/F) |
| 1 x | Circlick securite |
| 1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
| 1 x | Gold antispark 5,5 mm plug |
| 1 x | Oracover Black 10 m |
| 1 x | ABS Strip 1.5x2.0x1000 mm |
| 1 x | Vasa model Catapult |
| 1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
| 1 x | Extension PVC 150 cm (Graupner) |
| 1 x | 1/6 Pilot "Buddy" |
| 1 x | Oracover light Grey 2m |
| 1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
| 1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
| 1 x | ABS "T" angle 6.0x6.0x1000 mm |
| 1 x | Joint with bearing M2 22x5,5 |
| 1 x | Connector CAN 15 |
| 1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
| 1 x | Oracover White 2 m |
| 1 x | XH male balance (2S) connector (2 pcs) |
| 1 x | 30 cm DEANS female connector |
| 1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
| 1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
| 1 x | Cabel "Y" 30 cm (graupner) |
| 1 x | Round Rod 1,25x1000 mm |
| 1 x | Futaba Female 40 cm extension |
| 1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
| 1 x | Extension lead 15 cm Multiplex |
| 1 x | PVC 0,08 qmm Graupner servos wire (5 m) |
| 1 x | Cabel "Y" 30 cm (Futaba) |
| 1 x | 1/6 Pilot "Cindy" |
| 1 x | Extension silicon 30 cm female (Graupner) |
| 1 x | ABS "T" angle 8.0x8.0x1000 mm |
| 1 x | Ball link M1.6 (6 uds) |
| 1 x | 1/4 Pilot "Heidi" |
| 1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
| 1 x | ORACOVER Ferrari red (2 m) |
| 1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
| 1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
| 1 x | 1 m servo "Premium" wire (white/red/blue) |
| 1 x | 1/12 Pilot "Fighter" |
| 1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
| 1 x | Profile ABS half cane 2.0x1000 mm |
| 1 x | Premium servo extension 100cm |
| 1 x | Round Rod 6,0x1000 mm |
| 1 x | Ball link M3 (10 pcs) |
| 1 x | L-Connector 4.0 mm x 1000 mm |
| 1 x | Glases Innovation Plus |
| 1 x | MPX Sub-D Adaptor |
| 1 x | XH male balance (4S) connector (2 pcs) |
| 1 x | Ventus 1:4 set of instruments |
| 1 x | 800TVL CMOS camera for FPV |
| 1 x | M3 Maxi ball link (2 uds) |
| 1 x | Propeller balancer |
| 1 x | 2,5x60 mm allen screwdriver |
| 1 x | Fresa corte diamante Ø 2.35mm (flame) |
| 1 x | Smoke set "Glider" |
| 1 x | Dremel PERMAGRIT 18 mm round lime |
| 1 x | Cable control set |
| 1 x | Crimping tool |
| 1 x | PCARD Wireless System |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | PT 16x10 E Propeller |
| 1 x | Brass control horn M3 short for wire (2 pcs) |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
| 1 x | White smoke bombs AX-60 (5 pcs) |
| 1 x | 20x15 Falcon electric V2 |
| 1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Motor mount VANQUIST 48" F3A |
| 1 x | Brass control horn M4 long for wire (4 pcs) |
| 1 x | Horn 6/20 with M3 Bearing |
| 1 x | Horn 5/20 with M2 Bearing |
| 1 x | Horn 6/35 with M3 Bearing |
| 1 x | Horn 13,5x16 mm (2 pcs) |
| 1 x | Brass control horn M2 short for wire (2 pcs) |
| 1 x | Propeller 12x6 Falcon electric |
| 1 x | Carbon fiber rod 3.0 mm x 1000 mm |
| 1 x | 5 mm M2 variable inclined horn |
| 1 x | EVP Unit for AXI2208/xx and 2212/xx |
| 1 x | Adjustable brass horn threaded M3 |
| 1 x | Green smoke canister 140 g |
| 1 x | Carbon fiber rod 6.0 mmx1000 mm |
| 1 x | CNC FPV Display screen&Transmitter Holder Vertical |
| 1 x | Horn mando long (2 pcs) |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | Horn F3A de Titanium 16 mm (2 units) |
| 1 x | Red smoke bombs AX-60 (5 pcs) |
| 1 x | Horn 16,5x20 mm (2 pcs) |
| 1 x | Field folding model stand SebArt |
| 1 x | Carbon fiber flat 1000x6.0x0.8 mm |
| 1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
 |
| 7,320.59EUR |
many units
temporarily out of stock
