1 x | Aluminium wide washer M4 Gold (4 pcs) |
3 x | Spring lock washer 2.6 mm (20 pcs) |
1 x | Flat washer 4.3 mm (20 pcs) |
1 x | Flat washer 1.7 mm (20 pcs) |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
2 x | Spring lock washer 4.1 mm (20 pcs) |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Lock washer 2.7 mm (20 pcs) |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
2 x | Lock washer 2.2 mm (20 pcs) |
1 x | Quicklock washer 2 mm (10 pcs) |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | Circlik for shaft 1.2 mm (10 pcs) |
1 x | Lock washer 4.3 mm (20 pcs) |
1 x | M3 black washers (4 pcs) |
1 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | Circlik for shaft 2.3 mm (10 pcs) |
2 x | Quicklock washer 3 mm (10 pcs) |
3 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | Screwdriver for Torx® TX8 |
1 x | Copier 2x20 cm pcs |
1 x | Dust collector for mould cleaning |
1 x | Screwdriver for Hexagon 1,27mm |
1 x | Crimping tool |
1 x | Starter Sullivan-STAR 603 DINATRON |
1 x | Starter 12v (Max 180 and 30ccm) |
1 x | Ball Link Plier |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
2 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
2 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
2 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
2 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
2 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | ARAMID honeycomb 1300x2600x2 mm |
2 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
2 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
1 x | Silicone adhesive ELASTOSIL® E4, tube/ 90 ml |
2 x | Painting GHT Lexan Black 150 ml |
1 x | Spannlack 1000 ml |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Partall paste 650 g |
1 x | Universal Colour Paste deep black 250 g |
1 x | 20 g tin paste |
1 x | Spray EC Red 400ml |
1 x | 1000 ml sealer (DOPE) |
2 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Spray adhesive AEROFIX 2 |
1 x | Solvent Plasti Dip 1000 ml |
1 x | Spray adhesive INFUTAC (Clear) 500 ml |
1 x | Spray YELLOW Inca Lexan 150ml |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | XH female balance (5S) connector (2 pcs) |
1 x | Socket Screw M2x3 mm (4 pcs) |
1 x | Tapping Screw M2.2x13 (10 pcs) |
1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
1 x | Blue Aluminium lock nut M4 (4 pcs) |
2 x | Titanium M3x0,5x6 mm Flat Head screw (4 pcs) |
1 x | Lock nut aluminium M2.5 (4 pcs) |
1 x | Pan head screw M2x16 PH |
1 x | Flat washer 2.2 mm (20 pcs) |
1 x | Blind nut M3 (4 pcs) |
2 x | Lock washer 3.2 mm (20 pcs) |
1 x | Lock nut M5 (20 pcs) |
1 x | Hexagonal Nut M4 (20 pcs) |
3 x | LA500 housing-lower cyclic |
1 x | LA500 pilot-seat set |
1 x | LA500 nose |
2 x | LA500 rotor head shaft |
2 x | Baal link 4/14/4 (5 pcs) |
3 x | LA500 pre-rotation gear |
1 x | Rudder |
1 x | Head runner |
2 x | Blades 330mm |
1 x | Bearing 3x6x2,5 |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
2 x | Suction funnel for carburetor 90D-L (red) |
1 x | Foam plastic plates (310x210x8 mm) |
1 x | Steering lever |
2 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Spinner NUT M4 |
1 x | Spinner Alumin. fixed propeller 40 mm / 3,0 mm |
2 x | TMM 1210-3S heli |
1 x | Propeller diller for DLE111 and DA85-150 |
1 x | Handle for PERMAGRIT lime |
1 x | 45x9 mm foam special light KOVO wheel with radius (2 pcs) |
1 x | Precision wrench L100 mm |
1 x | XT-60 Plug Mold |
1 x | MPX plug mold V1 |
1 x | 76x24 mm (3.0") Type jets aluminium core wheel |
1 x | Hot Glue Stick GREEN |
1 x | Universal Filter |
1 x | 120x60 mm SLH KOVO wheel |
1 x | Landing gear axle Ø 6 mm (2 uds) |
1 x | 76 mm light wheels (2 pcs) |
3 x | Profile ABS half cane 4x2.5x1000 mm |
2 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | Profile ABS Square 4 x 1000 mm |
2 x | ABS angle 6,0x6,0x1000 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | Ball link M3 RPA's-UAV's |
1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
1 x | Ball link M3 (6 uds) |
1 x | Short ball link M1.6 (6 uds) |
1 x | 43x14 mm hard foam KOVO wheel (2 pcs) |
1 x | 32x9 mm foam standar KOVO wheel (2 pcs) |
1 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
1 x | 170x54 mm SLH KOVO wheel with bearing and metal hub |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
1 x | Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs |
1 x | Airtop balloon pneumatic wheels ø160 mm with bearing. 1 pair |
1 x | 110x55 mm C SLH KOVO wheel |
1 x | Modelling compound (Plastilin), sculptor's quality 1 Kg |
1 x | 58x20 mm (2.25") axle Ø5 Type jets mm aluminium core wheel |
1 x | Heat Seal Iron |
1 x | 152x46 Ø6.0 mm aluminium core wheel |
1 x | Vacuum pump 12 CFM |
1 x | 45x19 mm hard foam KOVO wheel (2 pcs) |
1 x | Hot Glue Stick BLACK |
1 x | Smoke pump RCEXL |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Fiberglass 25 g/m² 5000x1270 mm |
1 x | Universal Colour Paste deep black 50 g |
1 x | Reed valve for DA 50-R |
1 x | Glass fabric 25 g (2 m²) |
2 x | PVC grid diagonal 290x185x0.32 mm |
1 x | Fiberglass plate 1200x1000x0,2 mm |
1 x | Fiberglass plate 350x150x0.3 mm |
1 x | Carbon plate 350x150x1.5 mm |
1 x | Canopy Latch |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
1 x | Fiberglass plate 350x150x1.0 mm |
2 x | Fiberglass plate 350x150x2.5 mm |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | PowerFuel RX V2 Fuel Pump |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
2 x | SAITO FG-36 carburetor |
1 x | 40,0 mm hydro-propeller (left hydropropeller) |
1 x | |
1 x | Fiberglass plate 350x150x0.5 mm |
1 x | Glass fabric 49 g/m² (1,27 x 5 m) |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | KAVAN Hand crank fuel pump |
1 x | Profile ABS half cane 6.0x1000 mm |
1 x | ABS rectangular profile 10x5.0x1000 mm |
2 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Socket Head Screw M2x5 |
2 x | L-Connector 4.0 mm x 1000 mm |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
2 x | Screw M4x30 (10 pcs) |
1 x | Starter EM Gear Power 80 |
2 x | Threaded insert M6 (10 pcs) |
1 x | Screw M4x12 (10 pcs) |
2 x | Treaded hexagonal socket insert M4 Br (4 pcs) |
1 x | Threaded insert M5 (10 pcs) |
1 x | Socket Head Screw M2x8 |
1 x | Spring pin Ø 2 x 6 mm (10 pcs) |
1 x | Screw M3x8(10 pcs) |
2 x | Pilot LA 500 |
2 x | LA500 pre-rotation gear hub |
2 x | LA500 front gear holder |
1 x | Motor Mega AC 16/07/03 |
1 x | Blade Holder Full (3 blades) |
1 x | MEGA AC 16/10/03 Race + PG 5:1 F5J motor brushless |
1 x | Complet landing gear |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Head upper part |
1 x | SERVO DES 806 Pignons |
1 x | SERVO DES 568 MG |
1 x | Motor Mega AC 16/20/02 |
1 x | Motor Mega AC 16/25/02 |
1 x | Motor Mega AC 16/15/04 |
1 x | Motor Mega AC 16/25/03 |
1 x | Motor Mega AC 16/07/12 |
1 x | Motor Mega AC 16/07/04 |
1 x | Motor Mega AC 16/15/05 CE F5J |
1 x | Blade holder lower |
1 x | Blade holder center GFK 0,5 mm |
1 x | Motor rotor LA-500 |
1 x | EasyFLY Addon |
1 x | Spinner NUT M6 |
1 x | ESC YGE 120 LVK |
1 x | Aramid fibre shears Proton®, 21 cm / 8" length |
1 x | |
1 x | DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301) |
1 x | ABS angle 2,0x2,0x1000 mm |
2 x | Profile ABS Square 2 x 1000 mm |
1 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | T-Connector 4.0 mm x 1000 mm |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | Profile ABS Square 1 x 1000 mm |
1 x | TMM 2512-3S heli |
2 x | DUBRO - BOLTON PRESSURE FITTING 6-32 (1 PC) |
1 x | FX three-position switched channel, long |
1 x | Servo Robbe FS 525 BB MG HV |
1 x | Copier 5x20 cm pcs |
1 x | PET film Mylar® A 350, 50 cm, roll/ 5 m |
2 x | Hose clips 6 mm |
1 x | Glass fibre braided sleeve (45mm) roll 10m |
1 x | Panel Honeycom carbon 350x150x3.5mm |
1 x | DA 85 / DA 100 / DA 100 L carburetor |
1 x | LA500 housing-upper cyclic |
1 x | Steel Screw M1x8 (10 pcs) |
1 x | ULTIMATUM 2.0 m Red Bull |
1 x | Bearing block for noseleg landing gear |
1 x | Motor wall |
1 x | ULTIMATUM 2.0 m white |
1 x | EXTRA NG 74" white/red/blue (Skywing RC) |
1 x | Sukhoi 29S 2,6 m Yellow/Black (SebART) |
1 x | Balls 4 mm |
1 x | Baering 3x8x4 |
1 x | Side rudder |
1 x | Spinner Alumin. fixed propeller 30 mm / 3,2 mm |
1 x | Spinner Alumin. fixed propeller 40 mm / 3,2 mm |
1 x | Regulador Hobbywing Platinum PRO 130A-HV V4 |
1 x | Fresa corte diamante Ø 2.3mm (bola) |
1 x | Crimping tool |
1 x | Cut tube |
1 x | Dremel PERMAGRIT thin lime |
1 x | Dremel PERMAGRIT 18 mm round lime |
1 x | 2,0x50 mm allen screwdriver |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | Rubber profile 10-2 mm 2M |
2 x | L-Connector 1.0 mm x 1000 mm |
1 x | U Profile ABS 5,0x10,0x1000 mm |
1 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
1 x | Profile ABS triangular 6.0x1000 mm 90º |
1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
1 x | Profile ABS triangular 4.0x1000 mm 90º |
2 x | Flat Connector 4.0 mm x 1000 mm |
2 x | ABS angle 3,0x3,0x1000 mm |
2 x | ABS angle 1.5x1.5x1000 mm |
1 x | Profile ABS triangular 4.0x1000 mm 60º |
1 x | Rubber profile 6-2 mm 2M |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | 63x12 mm foam special light KOVO wheel with radius (2 pcs) |
1 x | 60x25 mm tail wheel "type F3A" |
1 x | Landing gear axle Ø 8 mm (2 uds) |
1 x | Superlight deluxe wheel 40 mm (2 pcs) |
1 x | 2,5x60 mm allen screwdriver |
1 x | PU aircraft tyre, 45x16x3 mm |
1 x | Peel ply 95 g/m² (plain weave) 20 mm x 100 m |
1 x | Walbro carburetor for MVVS 26/30/35/40 cc |
1 x | SLICK 360-A 104" (2640 mm) |
1 x | Suction funnel for carburetor DA70- MVVW 190cc (red) |
2 x | Suction funnel for carburetor 90D-M (red) |
1 x | Pan Head Screw M1,6x8 (10 pcs) |
1 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | Rubber profile 8-2 mm 2M |
1 x | Propeller electric carbon 10.5x6 |
1 x | HITEC 17 mm servo arm with ball link HITEC |
1 x | Hitec 25 mm servo arm with M3 ball link |
1 x | Spring pin Ø 1 x 6 mm (10 pcs) |
1 x | Socket Head Screw M2,5x12 |
1 x | Titanium M3x0,5x12 mm Flat Head screw (4 pcs) |
2 x | DLE 55 carburetor |
1 x | FESTO connector M7 barb fitting 6mm |
2 x | Profile ABS half cane 7.0x1000 mm |
1 x | Electric Fuel pump |
1 x | Glass fibre sleeve Ø 20 mm X 20m |
1 x | Electric Fuel Pump 12V |
1 x | Suction funnel for carburetor WALBRO 20-80cc (blue) |
1 x | Extension Arm for Carburetor (red) |
1 x | Propeller electric carbon 10x8 |
1 x | Screw M3x5 (10 pcs) |
1 x | Propeller electric carbon 9.5x6 |
1 x | Propeller electric carbon 8.5x6 |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | Pan Head Screw M2x6 PH |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | Nut for mounting M5 (4 pcs) |
1 x | Screw M2.5x20 (10 pcs) |
1 x | Futaba 54 mm servo arm with ball link |
1 x | Futaba 20 mm servo arm |
1 x | Profile ABS half cane 2.0x1000 mm |
1 x | Propeller electric carbon 6.5x4 |
1 x | Screw M2.5x10 (10 pcs) |
1 x | Propeller electric carbon 8.5x7 |
1 x | Propeller electric carbon 10.5x7 |
1 x | Profile ABS half cane 2.5x1000 mm |
1 x | 16x10 tree blades propeller Master Airscrew |
1 x | Pan Head Screw M1,6x6 (10 pcs) |
1 x | Nut for mounting M2,5 (4 pcs) |
1 x | Propeller electric carbon 10x7 |
1 x | Propeller POWER-PROP 13x9 |
1 x | Propeller POWER-PROP 10x6 |
1 x | Screws 2,2 x 6,5 mm (20 pcs) |
1 x | Propeller POWER-PROP 10x7 Izda |
1 x | Nut for mounting M4 (4 pcs) |
1 x | Nut for mounting M6 (4 pcs) |
1 x | Propeller POWER-PROP 13x9 Izda |
1 x | Propeller POWER-PROP 11x6 |
1 x | Pan Head Screw M2x8 PH countersunk head |
1 x | Screw M2x8 (10 pcs) |
1 x | Propeller POWER-PROP 10x7 |
1 x | 15x7 tree blades propeller |
1 x | HITEC 20 mm servo arm with ball link |
1 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | FUTABA 20 mm servo arm with ball link |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
1 x | Futaba 30 mm servo rounded arm |
1 x | Futaba 17 mm servo arm with ball link HITEC |
1 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
1 x | Futaba 2x20 mm servo double arm |
1 x | Futaba 52 mm servo arm |
1 x | Lock nut M5 (10 pcs) |
1 x | Tapping Screw M2.9x13 (10 pcs) |
1 x | Tapping Screw M2.2x65 (10 pcs) |
1 x | Threaded insert M3 (4 pcs) |
1 x | Tornillo cabeza boton M4x12 mm (5 pcs) |
|
21,069.56EUR |