| 2 x | Motor A2212/13T |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 1 x | SUS wire 3m (nylon coated) |
| 1 x | Locking cable tie 4.6x203 (uds) |
| 2 x | Steering arm 16 mm Ø 4 mm |
| 1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 2 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | Canopy Latch |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 2 x | One touch canopy lock |
| 2 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 2 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
| 1 x | Cockpit plastic closing |
| 1 x | Cierre cabina aluminio Ø4, I=10 mm |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | Servo NARO Max Std |
| 1 x | |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
| 1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 2 x | Blue metalic ball link M3/3 azul (2 pcs) |
| 1 x | M2,5 5Diam black ball link V2 (2 pcs) |
| 2 x | M3 INDUSTRIAL ball link (2 uds) |
| 1 x | Short ball link M1.6 (6 uds) |
| 1 x | Ball link M2,5 (10 pcs) |
| 1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
| 2 x | Ferrita con funda |
| 2 x | Ferrita 14x8x5.5 mm |
| 1 x | Crimping tool |
| 1 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 1 x | Flap hinge (6 pcs) |
| 1 x | Vacuum pump P1-N |
| 1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
| 1 x | Spinner Alumin. fixed propeller 40 mm / 5,0 mm |
| 1 x | Ball Link Plier |
| 1 x | 1,5x50 mm allen screwdriver |
| 1 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | Screwdriver for Torx® TX6 |
| 2 x | Z Bender - S Type Tool |
| 1 x | Long pinned hinge (12 uds) |
| 1 x | 2,5x60 mm allen screwdriver |
| 1 x | Crimping tool |
| 1 x | Screwdriver for Hexagon 1,5mm |
| 1 x | Small pinned hinge (12 uds) |
| 1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
| 1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
| 1 x | Hexagonal ball head 2.0 x 50 mm |
| 1 x | Starter 12v (Max 90 and 15ccm) |
| 1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 1 x | Long pinned hinge (6 uds) |
| 1 x | 18 mm reinforced hinge |
| 1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 2 x | Cut tube |
| 1 x | White smoke canister 65 g |
| 1 x | Trike XL motor set (motor+esc+prop) |
| 1 x | Straightened rod Ø 8.0 mm x 1000 mm |
| 1 x | Oratex Natural White 2m |
| 1 x | Prolongador S-Bus JR/JR 10cm |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | KAVAN Hand crank fuel pump |
| 1 x | Split pin 1x8 mm (10 uds) |
| 1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
| 1 x | Tip wing protector 30x10 (2 pcs) |
| 1 x | Lead with adhesive (2 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
| 1 x | Split M1,2x10 (10 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
| 1 x | Snap short M2 (10 uds) |
| 1 x | Wheel collar 5 mm Ø (4 uds) |
| 1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
| 1 x | T- Fittings red color (2pcs) |
| 1 x | Window mounting channel 5m |
| 1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
| 1 x | DLE 111 pipe plug |
| 1 x | Tip wing protector 28x10x12 (2 pcs) |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
| 1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
| 1 x | Covered closure or fairings |
| 1 x | Tip wing protector 40x14 (2 pcs) |
| 1 x | FESTO connector M7 Quick 6mm 90º |
| 1 x | Landing gear frontal support 25x32x16 |
| 1 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
| 1 x | Wheel collar 4 mm Ø (4 uds) |
| 1 x | Pushrod octagone 4/3 |
| 1 x | Allen wheel collar M4x4 |
| 1 x | Cable grommet Ø 5 mm (4 uds) |
| 1 x | 38x4,5 mm wires output (2 pcs) |
| 1 x | Cable grommet Ø 6.4 mm (4 uds) |
| 1 x | Snap pin for micro clevis (10 uds) |
| 1 x | Steering arm 16 mm Ø 3 mm |
| 1 x | GLOW 9C + accesories |
| 1 x | Compact on-board starting system (9715) |
| 1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
| 1 x | Joint with bearing M3 22x5,5 |
| 1 x | 6 mm hexagonal ball link M3 (10 pcs) |
| 1 x | Joint with bearing M2 22x5,5 |
| 1 x | Ball link M3 RPA's-UAV's |
| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Long ball link M1.6 (6 uds) |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | M3 Maxi ball link (2 uds) |
| 1 x | Buy Perforated film 145 cm / 50 m |
| 1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | ABS 500 x 400 x 1,5 mm (white) |
| 1 x | Screwdriver for Hexagon 1,27mm |
| 1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
| 1 x | 25 mm Sandpaper file |
| 1 x | 3,0x60 mm allen screwdriver |
| 1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Dust collector for mould cleaning |
| 1 x | Pin hinge 26x11 mm (10 uds) |
| 1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
| 1 x | Miniature brass strap hinge, 1 m |
| 1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
 |
| 3,535.95EUR |
