1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | BALSA leading edge 8x10x1000 mm |
2 x | BALSA trip 10x10x1000 mm |
2 x | BALSA triangular 8x8x1000 mm |
2 x | Interface Realflight Simulator |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
2 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
2 x | RF9 Flight Simulator with Spektrum Controller |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
3 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | Beech dowels 10 mm x 1000 mm |
2 x | BALSA triangular 10x10x1000 mm |
1 x | Trailing edge BALSA 35x8x1000 mm |
2 x | GameCommander USB Universal |
2 x | Beech dowels 4.0 x 1000 mm |
1 x | Slave-cable USB Easy Sim |
1 x | Starter EM Gear Power 80 |
1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
1 x | Extension MPX-MPX 20 cm |
1 x | Crimping tool |
1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
2 x | Strip ABS 2.0x5.0x1000 mm |
2 x | ABS Strip 1.0x2.0x1000 mm |
1 x | ABS Strip 1.5x4.0x1000 mm |
2 x | Round Rod 4,0x1000 mm |
1 x | Extra-long adjustable aluminium control horn 2,8x34 |
1 x | Brass control horn M4 long for wire (4 pcs) |
1 x | Long pinned hinge (6 uds) |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Cinta Goldfix 1m |
1 x | Propeller balancer |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Interface Jack Adapter IKARUS |
1 x | Carbon plate 350x150x1.0 mm |
1 x | SIMtransmitter 6 Mode 2 |
1 x | Tapa estado carga XT-60 (6 pcs) |
1 x | Support conector MPX (6 pcs) |
1 x | Support Flush MPX Conector (6 pcs) |
1 x | BALSA triangular 6x6x1000 mm |
2 x | Balsa panel 5.0x100x1000 mm |
2 x | Balsa panel 1.0x100x1000 mm |
1 x | Balsa panel 10x100x1000 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Balsa panel 6.0x100x1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Round Rod 1,25x1000 mm |
1 x | ABS Strip 1.5x2.0x1000 mm |
1 x | Round Rod 2,0x1000 mm |
1 x | Profile ABS half cane 4x1000 mm |
1 x | Profile ABS half cane 3x1000 mm |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Rubber profile 6-2 mm 2M |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | Epoxy L 40 min. 10 kg (Resin) |
1 x | Adhesive epoxy structures RESOLTECH 3350 (1 kg) |
1 x | Epoxy 40 min (Hardener). 1 Kg |
1 x | Epoxy Resin L + Hardener LT kit/ 895g |
1 x | Hysol Mixing Caps SET with 10 |
1 x | Epoxy Casting Resin + Hardener "water-clear" (300 min) |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Transmitter Crystal 35 Mc/s Ch 77 |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | 290 mm M4/M4 6.0x4.0 mm shaft ship |
1 x | Rigid coupling brass Ø 3.0 / 2.3 mm L: 20 mm |
1 x | Propeller RABOESCH M4 40 mm (3 Blades) (Right hydropropeller) |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | U Profile ABS 5,0x10,0x1000 mm |
1 x | Rudder 107-06 |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Propeller RABOESCH M3 50 mm (3 Blades pr) (Left hydropropeller) |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Adjustable brass horn threaded M3 |
1 x | 40,0 mm hydro-propeller (left hydropropeller) |
1 x | Manometer 4 mm |
1 x | Mini Infrared Thermomiter |
1 x | Spinner fixed propeller 60 mm / 5,0 mm |
1 x | Receiver Crystal 35 Mc/s Ch 62 |
1 x | Profile ABS triangular 4.0x1000 mm 60º |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | Charger LiPo Charger4 |
1 x | POLARON EX 800w charger |
1 x | Transmitter GRAUPNER MZ-24 Pro |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Propeller Pleg CAM-Prop 8x6 |
1 x | MZ-18, 9 Channel HoTT |
1 x | MZ-12, 6 Channel HoTT |
1 x | Distanzstück motor OS 120 AX |
1 x | Decorative caps, multicoloured, short |
1 x | Receiver replacement antenna, approx. 15 |
1 x | Conector JAPAN G2 Set 5 pares |
1 x | Decorative caps, multicoloured |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | Profile ABS half cane 5.0x1000 mm |
1 x | Xoar Electric Beechwood Prop 21x10 |
1 x | Xoar Electric Beechwood Prop 24x8 |
1 x | Xoar Electric Beechwood Prop 20x10 |
1 x | Propeller RABOESCH M4 40 mm (3 Blades) (Left hydropropeller) |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | Flat Connector 4.0 mm x 1000 mm |
1 x | Propeller RABOESCH M3 50 mm (3 Blades pr) (Right hydropropeller) |
1 x | A/C economy plywood 600x300x6+.0 mm |
1 x | Propeller RABOESCH M4 45 mm (3 Blades pr) (Right) |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Lite Plywood panel 600x300x2.0 mm |
1 x | Propeller RABOESCH M4 30 mm (3 Blades) (Right hydropropeller) |
1 x | Rigid coupling brass Ø 4 mm L: 25 mm |
1 x | Spare Shaft Ø6mm L:450mm M5 |
1 x | Balsa panel 8.0x100x1000 mm |
1 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | Rigid coupling brass Ø 2 mm L: 15 mm |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | Birch plywood plate 600x300x1.2 mm |
1 x | Rigid coupling brass Ø 4.0 / 2.3 mm L: 20 mm |
|
4,482.21EUR |