1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | Ferrita 17x10x6.5 mm |
1 x | Balsa panel 6.0x100x1000 mm |
1 x | BALSA triangular 8x8x1000 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
2 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
4 x | Beech dowels 10 mm x 1000 mm |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
2 x | A/C quality beech plywood 1520x750x4.0 mm |
2 x | A/C quality beech plywood 600x300x1.5 mm |
2 x | A/C quality beech plywood 600x300x5.0 mm |
2 x | A/C quality beech plywood 600x300x8.0 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Extension 90 cm (Futaba) |
1 x | Extension PVC 150 cm (Graupner) |
2 x | Extension silicon 100 cm (Graupner) |
1 x | Extension silicon 50 cm (Futaba) |
1 x | Extension silicon 30 cm female (Graupner) |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
1 x | Extension 30 cm (Futaba) |
3 x | Extension 15 cm (Futaba) |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | Extension 7.5 cm |
1 x | Extension silicon 10 cm (Graupner) |
1 x | Futaba male 40 cm extension |
1 x | Futaba Female 40 cm extension |
2 x | Extension silicon 10 cm (Futaba) |
1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
1 x | Extension silicon 25 cm (Graupner) |
1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
2 x | 200 mm extensión servo HITEC/JR |
1 x | Cable S.BUS 3 salidas 300 mm |
1 x | Extension silicon 35 cm (Futaba) |
1 x | Cabel "Y" 15 cm |
2 x | Extension silicon 75 cm (Graupner) |
2 x | Premium servo extension 100cm |
2 x | Extension silicon 25 cm (Futaba) |
2 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | Cable S.BUS 3 salidas 100 mm |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Extension silicon 50 cm (Graupner) |
1 x | Extension 100 cm (Futaba) |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | 1/12 Pilot "Tom" |
1 x | Support pump Xicoy X45 |
1 x | Wheel Ø 75 mm (1 ud) Electron Retracts |
1 x | Wheel 75 mm with electromagnet and brake disk (2 uds) |
3 x | Landing gear axle 4x21 4 mm (2 uds) |
1 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th |
1 x | 3 mm Prop Adapter M6 |
2 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | 5 mm Prop Adapter M8 |
1 x | Prop Shaft Adapter 5 mm/M8 "long" |
1 x | 3,2 mm Prop Adapter M8 |
2 x | 3.2 mm Prop Adapter M6 |
1 x | 6 mm Prop Adapter M8 |
2 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | M2 5Diam black ball link V2 (2 pcs) |
1 x | Blue metalic ball link M3/3 azul (2 pcs) |
1 x | Tube Pitot to PIXHAWK |
1 x | Ball link M1.6 (6 uds) |
1 x | Ball link M3 (10 pcs) |
1 x | Ball link M3 (10 pcs, flat ball) |
1 x | PIX Hawk with accesories |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Balsa panel 4.0x100x1000 mm |
2 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Extension silicon 35 cm male (Futaba) |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | Dremel 3000 130W |
1 x | NoNa BB wheel Ø175x55mm in pair |
2 x | Landing gear axle Ø 4 mm (2 uds) |
1 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | Fresa corte diamante Ø 2.3mm (bola) |
1 x | Ball Link Plier |
1 x | 3,0x60 mm allen screwdriver |
1 x | Dremel PERMAGRIT thin lime |
1 x | |
1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
1 x | Boxed KIT OF 7 Rotary Burrs FINE |
1 x | 55% silver electrodes (2 pcs) |
1 x | Copier 2x20 cm pcs |
1 x | Landing gear axle Ø 6 mm (2 uds) |
1 x | Tailwheel for 1-3 kg models |
2 x | Tail gear set (60-120 class) |
1 x | Tailwheel for F3A size |
1 x | 28 mm tailwheel unit |
1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
1 x | PYRO 600-11 |
1 x | KIRA 400-34 |
1 x | KIRA 600-20 |
1 x | KIRA 400-27 |
1 x | PYRO 600-12 |
1 x | KIRA 480-43 5,2:1 |
1 x | KIRA 600-38 6,7:1 |
1 x | PYRO 700-45 Long Axi |
1 x | PYRO 650-53L EJE LARGO |
1 x | KIRA 480-38 5,2:1 |
1 x | KIRA 480-34 5,2:1 |
1 x | KIRA 480-26 5,2:1 |
1 x | PYRO 650-103 Long Axi |
1 x | KIRA 600-20 6,7:1 |
1 x | DUPLEX 2.4EX MUI 150 Sensor |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | DUPLEX 2.4EX RC Power Switch 10 |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
1 x | 300 Newtons FEMA absorber |
1 x | SLICK 360-A 104" (2640 mm) |
1 x | EXTRA NG 74" white/red/blue (Skywing RC) |
1 x | ANGEL 48" pp orange/black/white |
1 x | EDGE 540-A 91" (2310 mm) |
1 x | LASER 260 60" V2 ARF Red (SkyWing) |
1 x | 4 mm Prop Adapter CN-Spinner |
1 x | Propeller 10x4,7 SlowFlyer |
1 x | Battery plate |
1 x | Ball joint long |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | Premium servo extension 50cm |
1 x | KONDOR 15-92 |
1 x | PYRO 900-52L |
1 x | KIRA 480-43 |
1 x | DRIVE 510 (KIRA 480-34 5,2:1 + Koby 55 LV) |
1 x | KIRA 480-34 |
1 x | KIRA 600-22 6,7:1 |
1 x | DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV) |
1 x | PYRO 700-45 |
1 x | KIRA 600-24 6,7:1 |
1 x | KIRA 400-39 5,2:1 |
1 x | PYRO 750-50L Competition |
1 x | KIRA 480-31 5,2:1 |
1 x | PYRO 700-56L |
1 x | PYRO 750-50L |
1 x | PYRO 800-48 Long Axi |
1 x | KIRA 500-26 6,7:1 |
1 x | KIRA 480-38 |
1 x | KIRA 500-36 6,7:1 |
1 x | MRPM-AC revolution sensor |
1 x | DUPLEX 2.4EX MULi 6s M |
1 x | DUPLEX TGs 2,4 GHz (transmitter module) |
1 x | DUPLEX 2.4EX Expander E2 |
1 x | Sensor DUPLEX 2.4EX MUI 200 MULi 6S for measuring voltage on LiX |
1 x | DUPLEX 2.4 EX MBar |
1 x | 51 mm white plastic spinner for fixed propeller / 4,0 mm axi |
1 x | Spinner INO 51 mm Chrome (Imitacion metal) |
1 x | F3A carbon 85 mm spinner for Hacker Q-80 |
1 x | Spinner INO 63 mm Chrome (Imitacion metal) |
1 x | Nut for 515/518/519 spinner special for Hacker |
1 x | Spinner INO 82 mm Chrome (Imitacion metal) |
1 x | 82 mm INO spinner (carbon imitation) |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | SERVO DES 588 BB MG |
1 x | Cierva C30 simulated motor |
1 x | LA500 cyclic central part |
1 x | LA500 rotor head core |
1 x | LA500 housing-lower cyclic |
1 x | Rotorshape Elevator |
1 x | Head core bushing |
1 x | LA500 Autogyro |
1 x | Cierva C30 Elevator |
1 x | LA500 pre-rotation gear |
1 x | LA500 nose |
1 x | Head lower part New |
1 x | Rotorshape Autogyro |
1 x | Motor rotor LA-500 |
1 x | LA500 housing-upper cyclic |
1 x | Pilot LA 500 |
1 x | Rotor Mast |
1 x | Wheel keeper washer |
1 x | Head spacer |
1 x | Steering lever |
1 x | Blades 330mm |
1 x | Head runner |
1 x | Cierva C30 Body Spain |
1 x | LA500 pre-rotation gear hub |
1 x | LA500 Blades |
1 x | LA500 ciclic lever |
1 x | Raer wall |
1 x | Motor wall |
1 x | Autogyro Cierva C30 Spain |
1 x | Support conector MPX (6 pcs) |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Propeller MEJZLIK 20x13 Electric light (41 g) |
1 x | Propeller APC 10x10 Electric |
1 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | Propeller APC 12x6 SF |
1 x | PropCover 16-20" (1 pcs) |
1 x | Extension silicon 30 cm male (Futaba) |
1 x | Landing gear axle Ø 8 mm (2 uds) |
1 x | Tailwheel for 60/120 size |
1 x | 100 Newtons FEMA absorber |
1 x | Absorver mount set for 5-10 Kg models |
|
18,017.44EUR |