| 1 x | SIMtransmitter 6 Mode 2 |
| 3 x | Trailing edge BALSA 35x8x1000 mm |
| 3 x | Beech dowels 4.0 x 1000 mm |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 3 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | BALSA triangular 6x6x1000 mm |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 2 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | Pine wood slat 3.0x5.0x1000 mm |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | Pine wood slat 10x10x1000 mm |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | BALSA triangular 15x15x1000 mm |
| 3 x | Beech dowels 10 mm x 1000 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | Liston HAYA 3 x 10 x 1000 mm |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | Towing hook |
| 1 x | SERVO HOLDER |
| 1 x | LOWER TOW HOOK |
| 1 x | Fixed launching hook |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | Red smoke canister 100 g |
| 1 x | TP/TopFuel - XH 2/3S Adapter |
| 1 x | 1,2x1000 mm 2:1 red termoretract tube |
| 1 x | Oracover CARBON Metalic 1 m |
| 1 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
| 2 x | A/C quality beech plywood 600x300x0.6 mm |
| 2 x | Soporte grifo FESTO vertical (1 pcs) |
| 2 x | Aro pasacable Ø25 mm (4 pcs) |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 2 x | Balsa panel 5.0x100x1000 mm |
| 2 x | Support Antena 2.4 Ghz (2 pcs) |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 2 x | Aro pasacable Ø20 mm (4 pcs) |
| 2 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | 6 mm Prop Adapter M8 |
| 2 x | 5 mm Prop Adapter M8 |
| 1 x | 3 mm Prop Adapter M6 |
| 2 x | DC Small for MultiLog & UltraLight |
| 2 x | 2 mm Prop Adapter M6 |
| 1 x | 3,2 mm Prop Adapter M8 |
| 2 x | 3.2 mm Prop Adapter M6 |
| 1 x | Prop Shaft Adapter 5 mm "long" |
| 1 x | 3.2 mm Prop Adapter M8 |
| 1 x | 4 mm Prop Adapter M8 |
| 2 x | 3.17 mm Prop Adapter CN-Spinner |
| 2 x | 2,3 mm Prop Adapter M6 |
| 2 x | Prop Shaft Adapter 4 mm/M8 "long" 35 mm |
| 1 x | 10 mm Prop Adapter M12 |
| 2 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | Servo inverter |
| 2 x | SERVO DES 568 MG |
| 1 x | Power MULTIlight |
| 1 x | HITEC DPC-11 programmer |
| 1 x | SERVO DES 658 BB MG |
| 1 x | SERVO DES 707 BB MG, Pignons |
| 1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
| 2 x | Aluminum Bayonet / strongal D35 mm / 1 m |
| 1 x | LED blink wire flashing (orange - 2pcs) |
| 1 x | Light System |
| 2 x | Servo Tester |
| 1 x | Servo Robbe FS 525 BB MG HV |
| 1 x | Servo ROBBE FS-31 Pico Servo |
| 1 x | Flap hinge (6 pcs) |
| 1 x | Balsa panel 2.0x100x1000 mm |
| 1 x | A/C quality beech plywood 600x300x8.0 mm |
| 2 x | Soporte grifo FESTO (2 pcs) |
| 3 x | quality beech plywood BIRCH 600x300x2.0 mm |
| 1 x | Balsa panel 8.0x100x1000 mm |
| 1 x | Balsa panel 6.0x100x1000 mm |
| 1 x | Distanzstück motor OS 120 AX |
| 1 x | Manometer 4 mm |
| 1 x | Receiver replacement antenna, approx. 85 |
| 1 x | Receiver replacement antenna, approx. 15 |
| 1 x | Decorative caps, multicoloured |
| 1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
| 1 x | A/C quality beech plywood 1520x750x4.0 mm |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | Lite Plywood panel 600x300x2.0 mm |
| 1 x | Balsa panel 3.0x100x1000 mm |
| 1 x | Tapa estado carga XT-60 (6 pcs) |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | Birch plywood plate 600x300x1.5 mm |
| 1 x | Tube support Ø 6mm (10 pcs) |
| 1 x | Balsa panel 10x100x1000 mm |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
| 1 x | Balsa panel 1.5x100x1000 mm |
| 1 x | Birch plywood plate 600x300x2.5 mm |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | Support Flush MPX Conector (6 pcs) |
| 1 x | Support Filtro FESTO |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | A/C quality beech plywood 600x300x1.5 mm |
| 1 x | Support ECU Xicoy X-45 |
| 1 x | Birch plywood plate 600x300x1.2 mm |
| 1 x | A/C economy plywood 600x300x6+.0 mm |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | Balsa panel 4.0x100x1000 mm |
| 1 x | Balsa panel 2.5x100x1000 mm |
| 1 x | Support pumb/filter Xicoy X45 |
| 1 x | Support pump Xicoy X45 |
| 1 x | Support Pitot JETI |
| 1 x | Motor brushless 1806 - 2300 Kv Cuadracopter |
| 1 x | Propeller MEJZLIK 22x10 Electric light (36 g) |
| 1 x | 8Wx2 Navigation & Strobe, 11mm Red/White |
| 1 x | Futaba S-Bus Rx/Gyro Link Lead |
| 1 x | 3,2 mm Prop Adapter M6 |
| 1 x | 5 mm Prop Adapter CN-Spinner |
| 1 x | Prop Shaft Adapter 5 mm/M8 "long" |
| 2 x | Prop Shaft Adapter 6 mm/M8 "long" 35 mm |
| 1 x | 2,3 mm Prop Adapter M6 |
| 1 x | 4 mm Prop Adapter CN-Spinner |
| 1 x | Set Altimeter SHRead |
| 1 x | ESC ALPHA 60A HV |
| 1 x | Propeller MEJZLIK 9,5x3 SF Carbon Indoor |
| 1 x | Módulo Bluetooth |
| 1 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
| 1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
| 1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
| 1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
| 1 x | 4 mm Prop Adapter M8 |
| 1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
| 1 x | Soporte metal para servos |
| 1 x | Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M |
| 1 x | Vess propeller 12x7 S |
| 1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
| 1 x | Straightened rod Ø 6.0 mm x 1000 mm |
| 1 x | 28 mm tailwheel unit |
| 1 x | Contest-S-Pult-Carbon mc-20/mc-24 |
| 1 x | Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
| 1 x | Propeller APC 11x6 Glow/Gas |
| 1 x | 16x10 BIELA propeller (3-blades) |
| 1 x | 18x10 BIELA 3Bl propeller (3-blades) |
| 1 x | 26x16D BIELA 3Bl propeller (3-blades) |
| 1 x | Liston HAYA 8 x 8 x 1000 mm |
| 1 x | FIALA 22X8 WOODEN 3-BLADE PROPELLER (GAS) |
| 1 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
| 1 x | Foam plastic plates (310x210x5 mm) |
| 1 x | Straightened rod Ø 8.0 mm x 1000 mm |
| 1 x | SERVO DES 588 BB MG |
| 1 x | Foam plastic plates (310x210x3 mm) |
| 1 x | Straightened rod Ø 5.5 mm x 1000 mm |
 |
| 2,837.35EUR |
